3D Printing InfoPrinter comparison
FlashForge Adventurer 5M Pro vs Sovol SV08 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Adventurer 5M Pro comparisonsMore Sovol SV08 Max comparisons
| Property | FlashForge Adventurer 5M ProCOREXY | Sovol SV08 MaxCOREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Sovol |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Adventurer 5M Pro; FlashForge's own spec table gives the machine name as "Adventurer 5M PRO" and the store abbreviates it AD5M Pro[1][2] | Sovol SV08 Max 3D Printer[3][4] |
| Street price (USD; dated snapshot per entry) | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00[1][2] | $1,099.00 on sovol3d.com against a $1,299.00 compare-at price (15% off), in stock, checked Aug 2026[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed sibling of the open-frame Adventurer 5M (same 220 mm cube, same 280 °C nozzle, same 600 mm/s, but 100 °C bed vs 110 °C and no filtration). Also distinct from the AD5X, which shares the chassis but has a 300 °C nozzle, a 4-colour IFS unit and no air filtration. Refurbished units of all three are sold separately[1][5][6][2] | Much larger sibling of the SV08. Differences that matter in a spec box: 500x500x500 vs 350x350x345, 50 vs 30 mm3/s, TMC5160 XY drivers vs TMC2209, CAN bus, HDMI output, dual 0.4 mm nozzles in the box, and a separately sold chamber-heating module. A chamber heating module for the SV08 Max is listed at $69[3][7][8][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][9] | 500 x 500 x 500 mm advertised[3][7] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 380 x 400 x 453 mm excluding the spool holder[1][9] | 700 x 710 x 750 mm excluding the spool holder. Shipping cartons: 810 x 820 x 360 mm plus a 775 x 728 x 155 mm enclosure-kit box[3][7] |
| Frame construction & material | All-metal CoreXY structure (FlashForge writes it "CoXY")[1] | Aluminium-extrusion CoreXY frame supplied as a kit; Sovol ships it in two cartons, one of which is an enclosure kit[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed. Dual-layer HEPA plus activated-carbon filtration on both internal and external circulation; FlashForge claims 99% capture of particles and VOCs[1][9] | Enclosure kit shipped with the machine (separate carton). A chamber-heating module is sold separately at $69[3][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][10] | CoreXY[3][7] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Z axis 4 x TMC2209; A axis 1 x TMC5160; B axis 1 x TMC5160. Toolhead communication over CAN bus[3][7] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed)[1][9] | 700 mm/s maximum (manufacturer claim)[3][7] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][9] | 40,000 mm/s2 maximum (manufacturer claim)[3][7] |
| Max volumetric flow claimed (mm³/s) | Not documented | 50 mm3/s maximum (manufacturer claim)[3][7] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder[1][9] | Direct drive with auxiliary (assisted) filament feeding[3][7] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heater. Two 0.4 mm nozzles supplied as standard; 0.4/0.6/0.8 mm optional[3][7] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 280 °C claimed[1][9] | <=300 °C claimed[3][7] |
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: FlashForge's own spec table says 100 °C platform temperature, 3DJake's table says 110 °C. Lower vendor figure used as the sortable value[1][9] | <=100 °C claimed[3][7] |
| Bed surface (material, texture, coating), single/double-sided | Flexible removable PEI-coated spring-steel plate[1][9] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; FlashForge does not name the probe technology on the product page[1] | Not stated on the SV08 Max page; the SV08 family uses an inductive sensor plus pressure sensor[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Filament runout detection plus filament tangle/clog detection. Sovol does not describe the tangle or clog mechanism[3][7] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Internal plus external circulation with a HEPA and activated-carbon filter[1][9] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[3][7] |
| Input voltage (110/220 V, switch or auto) | AC 100-120 V / 200-240 V, 50/60 Hz[1][9] | Not documented |
| Total rated power draw | 350 W rated[1][9] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper (3DJake's table renders it as "Clipper"). OrcaSlicer is the supported slicer[3][7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch screen[1][9] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1][9] | USB, Wi-Fi 2.4 GHz and 5 GHz, HDMI, Ethernet[3][7] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera monitoring listed; resolution and framerate not published[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery, plus automatic shutdown[1] | Power-loss resume printing supported; mechanism not published[3][7] |
| Materials Support | ||
| Officially supported filament list | PLA and PETG on the 0.4 mm nozzle; ABS/ASA; TPU, PLA-CF and PETG-CF on 0.6/0.8 mm nozzles[1] | 1.75 mm filament; Sovol does not publish a per-material list on this page[3][7] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only, no independent measurement: 50 dB in low-noise mode, 55 dB in standard mode. Distance and method not stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | FlashForge's Adventurer 5M page states a 12-month limited warranty for that model; the 5M Pro page does not restate it[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Flashforge Adventurer 5M product page flashforge.com · 2026-08 · vendor
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- Sovol SV08 Max technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- FlashForge Adventurer 5M Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review