3D Printing InfoPrinter comparison
FlashForge Adventurer 5M Pro vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Adventurer 5M Pro comparisonsMore Snapmaker Artisan comparisons
| Property | FlashForge Adventurer 5M ProCOREXY | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Snapmaker |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Adventurer 5M Pro; FlashForge's own spec table gives the machine name as "Adventurer 5M PRO" and the store abbreviates it AD5M Pro[1][2] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[3] |
| Street price (USD; dated snapshot per entry) | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00[1][2] | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed sibling of the open-frame Adventurer 5M (same 220 mm cube, same 280 °C nozzle, same 600 mm/s, but 100 °C bed vs 110 °C and no filtration). Also distinct from the AD5X, which shares the chassis but has a 300 °C nozzle, a 4-colour IFS unit and no air filtration. Refurbished units of all three are sold separately[1][4][5][2] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][6] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 380 x 400 x 453 mm excluding the spool holder[1][6] | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[3] |
| Net weight (kg) | Not documented | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[3] |
| Frame construction & material | All-metal CoreXY structure (FlashForge writes it "CoXY")[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed. Dual-layer HEPA plus activated-carbon filtration on both internal and external circulation; FlashForge claims 99% capture of particles and VOCs[1][6] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][7] | IDEX — two independently driven print heads[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Z-axis lead 8 mm; X and Y leads 40 mm[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed)[1][6] | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[3] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder[1][6] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 280 °C claimed[1][6] | 300 °C maximum (manufacturer claim)[3] |
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[1] | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: FlashForge's own spec table says 100 °C platform temperature, 3DJake's table says 110 °C. Lower vendor figure used as the sortable value[1][6] | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[3] |
| Bed surface (material, texture, coating), single/double-sided | Flexible removable PEI-coated spring-steel plate[1][6] | Dual-sided textured PEI sheet[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; FlashForge does not name the probe technology on the product page[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Internal plus external circulation with a HEPA and activated-carbon filter[1][6] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-120 V / 200-240 V, 50/60 Hz[1][6] | Not documented |
| Total rated power draw | 350 W rated[1][6] | Integrated controller rated 300 W + 450 W[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch screen[1][6] | 7-inch touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1][6] | Wi-Fi, USB cable, USB flash drive[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera monitoring listed; resolution and framerate not published[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery, plus automatic shutdown[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG on the 0.4 mm nozzle; ABS/ASA; TPU, PLA-CF and PETG-CF on 0.6/0.8 mm nozzles[1] | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only, no independent measurement: 50 dB in low-noise mode, 55 dB in standard mode. Distance and method not stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | FlashForge's Adventurer 5M page states a 12-month limited warranty for that model; the 5M Pro page does not restate it[4] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- Flashforge Adventurer 5M product page flashforge.com · 2026-08 · vendor
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- FlashForge Adventurer 5M Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review