3D Printing InfoPrinter comparison
FlashForge Adventurer 5M Pro vs Rat Rig V-Core 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Adventurer 5M Pro comparisonsMore Rat Rig V-Core 4 comparisons
| Property | FlashForge Adventurer 5M ProCOREXY | Rat Rig V-Core 4COREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Rat Rig |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Adventurer 5M Pro; FlashForge's own spec table gives the machine name as "Adventurer 5M PRO" and the store abbreviates it AD5M Pro[1][2] | Rat Rig V-Core 4, sold in the US as "RatRig V-Core 4 3D Printer Kit"[3] |
| Street price (USD; dated snapshot per entry) | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00[1][2] | $2,319.99 at Fabreeko for the fully-specified US kit (price includes shipping and duty in the continental USA), Batch 4, checked Aug 2026. 300 mm ABS-parts variant in stock, 400 mm down to one unit. Rat Rig's own base kit is priced separately in EUR[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed sibling of the open-frame Adventurer 5M (same 220 mm cube, same 280 °C nozzle, same 600 mm/s, but 100 °C bed vs 110 °C and no filtration). Also distinct from the AD5X, which shares the chassis but has a 300 °C nozzle, a 4-colour IFS unit and no air filtration. Refurbished units of all three are sold separately[1][5][6][2] | Three sizes (300, 400, 500 mm cubes) and three motion configurations: Standard CoreXY, Hybrid CoreXY (+$149.99, adds two motors to Y), and IDEX with two independent toolheads (+$450.00). Superseded by the V-Core 4.1. Raspberry Pi and enclosure panels are not included[3][4] |
| Market position: superseded? successor announced? | Not documented | Superseded by the V-Core 4.1, which adds a steel X gantry, a full-metal toolhead, improved part cooling, 8 mm beds on the 400 and 500 sizes and pre-made cables. Rat Rig sells a 4.1 upgrade kit for existing V-Core 4 owners[4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][7] | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 380 x 400 x 453 mm excluding the spool holder[1][7] | Not documented |
| Frame construction & material | All-metal CoreXY structure (FlashForge writes it "CoXY")[1] | 30-series aluminium extrusion with printed ABS structural parts[3][4] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed. Dual-layer HEPA plus activated-carbon filtration on both internal and external circulation; FlashForge claims 99% capture of particles and VOCs[1][7] | Open by default; enclosure panels sold separately[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][8] | CoreXY, or Hybrid CoreXY, or Hybrid CoreXY IDEX depending on the configuration ordered[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed)[1][7] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][7] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder[1][7] | LDO Orbiter 2.0 direct-drive extruder[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Phaetus Rapido 2.0 UHF[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 280 °C claimed[1][7] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: FlashForge's own spec table says 100 °C platform temperature, 3DJake's table says 110 °C. Lower vendor figure used as the sortable value[1][7] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Flexible removable PEI-coated spring-steel plate[1][7] | Keenovo silicone bed heater[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; FlashForge does not name the probe technology on the product page[1] | Beacon eddy-current probe[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Nidec 4028 part-cooling fan[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Internal plus external circulation with a HEPA and activated-carbon filter[1][7] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | BigTreeTech Octopus[3] |
| Input voltage (110/220 V, switch or auto) | AC 100-120 V / 200-240 V, 50/60 Hz[1][7] | Not documented |
| Total rated power draw | 350 W rated[1][7] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | RatOS, Rat Rig's Klipper distribution[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch screen[1][7] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1][7] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera monitoring listed; resolution and framerate not published[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; Raspberry Pi and enclosure panels sourced separately[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery, plus automatic shutdown[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG on the 0.4 mm nozzle; ABS/ASA; TPU, PLA-CF and PETG-CF on 0.6/0.8 mm nozzles[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only, no independent measurement: 50 dB in low-noise mode, 55 dB in standard mode. Distance and method not stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | FlashForge's Adventurer 5M page states a 12-month limited warranty for that model; the 5M Pro page does not restate it[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- RatRig V-Core 4 kit (US distributor listing) fabreeko.com · 2026-08 · vendor
- Rat Rig V-Core 4.1 product page ratrig.com · 2026-08 · vendor
- Flashforge Adventurer 5M product page flashforge.com · 2026-08 · vendor
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- FlashForge Adventurer 5M Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review