3D Printing InfoPrinter comparison
ELEGOO Neptune 4 vs QIDI Plus5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Neptune 4 comparisonsMore QIDI Plus5 comparisons
| Property | ELEGOO Neptune 4BEDSLINGER | QIDI Plus5COREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Neptune 4 (spec table "Product Model: Neptune 4")[1] | QIDI Plus5, sold as "QIDI Plus5 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 27 May 2023 (Shopify publish date)[4] | Launched 5 August 2026, 09:00 EDT / 15:00 CEST[5] |
| Launch MSRP (USD) | Not documented | $749 regular launch price; a launch-window member discount put it under $700[5] |
| Street price (USD; dated snapshot per entry) | $219.00 on us.elegoo.com, Aug 2026, against a compare-at price of $249.00; both the Ribbon-Cable and Type-C printhead variants are the same price[4] | $749.00 for the standard model on us.qidi3d.com, checked Aug 2026. Other variants: Polar Cooler bundle $899.00, Plus5 Combo $899.00, Combo + Polar Cooler $1,049.00. No compare-at price listed[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two printhead variants of the same machine are sold under one SKU - "Ribbon-Cable Version" and "Type-C Version" - which use different printhead parts. Within the Neptune 4 family the numbers diverge sharply and get mixed up constantly: Neptune 4 is 225 x 225 x 265 mm with a 110 C bed and 20000 mm/s2; the Plus is 320 x 320 x 385 mm with a 100 C bed and 12000 mm/s2; the Max is 420 x 420 x 480 mm with an 85 C bed and only 8000 mm/s2. The Neptune 4 Pro is a separate model again[4][1][6][7] | Four purchase variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), and Combo + Polar Cooler. The Polar Cooler is a pre-sale add-on shipping separately, so its specs are not Plus5 specs. Replaces the Plus4 (305x305x280, 450 W + 400 W chamber)[2][5] |
| Market position: superseded? successor announced? | Still listed in ELEGOO's US store Neptune section in Aug 2026 alongside the 4 Pro, 4 Plus and 4 Max, but ELEGOO's current development is on the Centauri line[8] | Current flagship of QIDI's large-format line as of Aug 2026; sits below the Max4 (390x390x340)[2][9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 225 x 225 x 265 mm; the PEI platform itself is 235 x 235 mm[1] | 320 x 320 x 300 mm advertised — QIDI states this is about 18% more volume than the Plus4[2][3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 475 x 445 x 515 mm. ELEGOO separately publishes a "maximum size for machine activity" of 475 x 550 x 735 mm including rack and tray - the depth to allow for is 550 mm, not 445 mm[1] | 500 x 488 x 558 mm[3] |
| Net weight (kg) | 8.3 kg net, 10.6 kg gross[1] | 29.0 kg net[3] |
| Frame construction & material | CNC-machined aluminium extrusion frame[1] | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed, with a 3-stage air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, actively heated, 550 W chamber heater — reported as a 37.5% increase in heater power over the Plus4 (manufacturer claim)[3][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger[1] | CoreXY[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | High-precision linear rails on X[2][5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Two lead screws (the Neptune 4 Plus and Max add two tie rods to the same arrangement)[10] | Not documented |
| Belts (type, width, e.g. Gates?) | Not documented | 1.5GT belts, 9 mm wide — wider than the 2GT 6 mm belts common in this class[2][5] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)" is all ELEGOO publishes; no driver part number is given[10] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); the Neptune 4 Plus page for the same family states a recommended 250 mm/s[1][6] | 600 mm/s (manufacturer claim)[3] |
| Recommended/typical print speed | 250 mm/s recommended printing speed against the 500 mm/s ceiling (ELEGOO's own figure)[10] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim) - notably higher than the Plus at 12000 and the Max at 8000, because the moving mass is smaller[1][6][7] | <=20,000 mm/s2 (manufacturer claim)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Resonance compensation listed as a feature; implementation not named on the product page[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[10] | Direct drive with hardened dual gears[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle, 0.4 mm, with a copper and titanium-alloy heat break - the Plus and Max use a titanium-alloy heat break only[10] | Ceramic heating-plate hotend with a bimetal nozzle; 0.4 mm standard, 0.2/0.6/0.8 mm optional[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | <=370 °C claimed[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature[1] | <=120 °C claimed, described by QIDI as an even-heating bed[2][3] |
| Bed surface (material, texture, coating), single/double-sided | PEI spring steel sheet, now upgraded by ELEGOO to a dual-sided textured PEI + PLA-specific surface[10] | Aluminium silicone heated bed with a dual-sided textured PEI plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Manual levelling combined with 121-point auto-levelling; no full-auto calibration on this model[10] | Automatic levelling using an integrated load cell; QIDI describes it as direct nozzle-contact detection[3][5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; power-loss resume printing supported[1] | Filament run-out sensor, plus a filament cutter[3] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon; QIDI claims 99.5% capture of airborne particles and dust[2][3][5] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | ELEGOO describes it only as a "Klipper High-Speed Quiet Motherboard" - no board model or MCU published[10] | Not documented |
| Input voltage (110/220 V, switch or auto) | 115/230 V, 50/60 Hz on the product page; ELEGOO's compare page gives 110-120 / 220-240 VAC 50/60 Hz[1][10] | 100/240 VAC, 50/60 Hz[3] |
| Total rated power draw | 310 W rated power, 24 V output[10] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper (ELEGOO names the system "Klipper" outright for the Neptune 4 series, rather than the ELEGOO OS branding used on the Centauri machines)[10][11] | Not stated on the product page. QIDI's slicer ecosystem is QIDI Studio, and Orca/PrusaSlicer are listed as supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[10] | 4-inch touchscreen, 480 x 320[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, with Orca and Cura also supported[10] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | LAN and USB file transfer; no Wi-Fi is listed for the base Neptune 4, unlike the Plus (USB/LAN/Wi-Fi) and Max (Wi-Fi/USB/WLAN)[1][6][7] | Wi-Fi 2.4 GHz / 5 GHz, Ethernet, USB; 32 GB eMMC storage plus USB 2.0 flash drive[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | AI camera with failure detection, up to 1080p, timelapse supported (low frame rate)[2][3][5] |
| LED chamber/toolhead lighting | Not documented | RGB status light[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, ASA, Nylon[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, carbon- and glass-fibre-reinforced polymers[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 60 dB or less - a manufacturer figure with no distance or method stated, so it is not comparable with an independently measured reading[10] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[12] | QIDI store terms: 1-year coverage, lifetime tech guidance, 14-day no-reason return[9] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus5 technical data table 3djake.com · 2026-08 · vendor
- ELEGOO Neptune 4 Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor