3D Printing InfoPrinter comparison
ELEGOO Neptune 4 Max vs Sovol Zero
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Neptune 4 Max comparisonsMore Sovol Zero comparisons
| Property | ELEGOO Neptune 4 MaxBEDSLINGER | Sovol ZeroCOREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Neptune 4 Max[1] | Sovol Zero 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 20 September 2023 (Shopify publish date)[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $389.00 on us.elegoo.com, Aug 2026, against a compare-at price of $559.99; Ribbon-Cable and Type-C printhead variants are the same price[4] | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00[2][3][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Largest Neptune 4. The trade-off against the smaller models is easy to miss: the bed only reaches 85 C (against 100 C on the Plus and 110 C on the base Neptune 4) and acceleration is capped at 8000 mm/s2 (against 12000 and 20000), because of the mass of a 430 x 430 mm moving bed. Two printhead variants, Ribbon-Cable and Type-C, are sold under one SKU[1][6][7][4] | No sibling variants at the time of checking. Sovol positions it against the Voron 0 and Bambu Lab P1P. Note the bed and nozzle limits are higher than the larger SV08 (120 vs 100 °C bed, 350 vs 300 °C nozzle), so SV08 figures must not be carried across[2][5][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 420 x 420 x 480 mm; printing platform 430 x 430 mm[1] | 152.4 x 152.4 x 152.5 mm advertised[2][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 658 x 632 x 740 mm; ELEGOO's maximum size for machine activity is 658 x 950 x 960 mm including rack and tray - allow nearly a metre of depth and height[1] | 345 x 420 x 475 mm[2] |
| Net weight (kg) | 18.1 kg net, 21.8 kg gross[1] | Not documented |
| Frame construction & material | CNC-machined aluminium extrusion frame[1] | Full linear rails on all axes; CoreXY with two motors sharing the moving mass[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed[5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger[1] | CoreXY[5] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear rails on all axes[5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Two lead screws with two tie rods[9] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[9] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim)[1] | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints[2][5] |
| Recommended/typical print speed | 250 mm/s recommended printing speed against the 500 mm/s ceiling (ELEGOO's own figure); default acceleration is 4000 mm/s2[9] | Not documented |
| Max acceleration (claimed, mm/s²) | 8000 mm/s2 max toolhead acceleration (manufacturer claim) - the lowest in the Neptune 4 family[1] | 40,000 mm/s2 maximum (manufacturer claim)[2][5] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=50 mm3/s (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[9] | Planetary-gear direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle, 0.4 mm, with a titanium-alloy heat break[9] | Ceramic heating plate. Brass or hardened-steel nozzles in 0.2/0.4/0.6/0.8/1.0 mm[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | <=350 °C claimed[2][5] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass or hardened steel, buyer's choice[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 85 C max heated bed temperature at 25 C ambient - well below the 100-110 C of the smaller Neptunes, which limits ABS/ASA work despite them being on the compatibility list[1] | <=120 °C claimed; Sovol states the bed is AC-heated[2][5] |
| Bed surface (material, texture, coating), single/double-sided | PEI spring steel sheet, now upgraded to a dual-sided textured PEI + PLA-specific surface; platform 430 x 430 mm[9] | Double-sided PEI steel plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Manual levelling combined with 121-point auto-levelling[9] | Eddy-current scanning combined with pressure (force) sensing — Sovol describes it as an inductive sensor plus force sensor[2][5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection and power-loss resume printing[1] | Filament sensor fitted; type and location not published[2][5] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[9] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616, 1 GB RAM, 8 GB eMMC, 64-bit[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 150 W / 24 V (this is the DC supply; the bed is separately AC-heated per Sovol)[2][5] |
| Input voltage (110/220 V, switch or auto) | 100-120 V / 220-240 V, 50/60 Hz[1][9] | Not documented |
| Total rated power draw | 320 W rated power, 24 V output[9] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[9] | Not named on the product page beyond OTA updates and OrcaSlicer support; Sovol markets the machine as open source[2][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[9] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[9] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB and WLAN file transfer[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 not supported)[2][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera for monitoring; resolution not published[2][5] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Arrives preassembled[5] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[2][5] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, ASA, Nylon - but note the 85 C bed ceiling against ABS and ASA[1] | PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 65 dB or less - a manufacturer figure with no distance or method stated[9] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Neptune 4 Max product page (Specification table) us.elegoo.com · 2026-08 · vendor
- Sovol Zero 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- Sovol Zero announcement article (Sovol blog) sovol3d.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor