3D Printing InfoPrinter comparison
ELEGOO Mars 5 vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Mars 5 comparisonsMore Snapmaker Artisan comparisons
| Property | ELEGOO Mars 5RESIN | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Snapmaker |
| Class | RESIN | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Mars 5. Elegoo's own product handle spells the configuration out: mars-5-4k-6-6inch-monochrome-lcd-resin-3d-printer[1][2][3] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[4] |
| Street price (USD; dated snapshot per entry) | $179.00 on us.elegoo.com against a $225.00 compare-at price (20% off), in stock, checked Aug 2026. The live product feed shows the same $179.00[2][3] | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold beside the Mars 5 Ultra, which is a materially different machine: 7-inch 9K masking LCD vs 6.6-inch 4K, 18 um vs 35 um pixels, 150 vs 70 mm/h, a 4.0-inch capacitive control screen vs 3.5-inch resistive, and Wi-Fi (the plain Mars 5 is USB only). Elegoo lists ten further Mars 5 / Mars 5 Ultra bundle SKUs pairing the printers with Mercury wash-and-cure stations at $302-$432; those are not printer prices[1][5][2][3] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 143.43 x 89.6 x 150 mm[1] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 230 x 230 x 433.5 mm[1] | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[4] |
| Net weight (kg) | Approximately 6.6 kg[1] | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[4] |
| Frame construction & material | Metal frame with adjustable foot pads[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a removable UV-blocking cover[1] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA — UV LCD masked stereolithography. Single Z axis, build plate lifting straight out of the vat (no tilt-release on this model, unlike the Mars 5 Ultra)[1][5] | IDEX — two independently driven print heads[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Z-axis lead 8 mm; X and Y leads 40 mm[4] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[4] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C maximum (manufacturer claim)[4] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[4] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[4] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[4] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate with a quick-release design[1] | Dual-sided textured PEI sheet[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling, one click. An intelligent mechanical sensor detects resin residue to prevent LCD damage[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 V, 50/60 Hz, 24 V 3 A[1] | Not documented |
| Total rated power draw | Not documented | Integrated controller rated 300 W + 450 W[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Elegoo. Supported slicers are Voxeldance Tango and CHITUBOX; STL and OBJ accepted[1] | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch resistive touchscreen (control panel — not the masking LCD, see W1)[1] | 7-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB only — no Wi-Fi on this model[1] | Wi-Fi, USB cable, USB flash drive[4] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin. Elegoo does not publish a resin compatibility list on this listing[1] | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[4] |
| Safety | ||
| Firmware safety limits (max temp cutoffs — exact values) | Intelligent overheating protection stops printing above 80 °C[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[4] |
| Resin & MSLA | ||
| Masking LCD | 6.6-inch 4K monochrome masking LCD, 4098 x 2560 px, XY pixel pitch 35 x 35 um (manufacturer specification)[1][3] | Not documented |
| Light source | COB LED at 405 nm. Elegoo does not publish an LED count or collimating optics for this model[1] | Not documented |
| Vertical print speedmm/h | 70 mm/h maximum (manufacturer claim). Elegoo does not state the layer height or resin type the figure assumes[1] | Not documented |
| Release film | PFA film with a non-stick surface. No rated life published[1] | Not documented |
| Resin vat & feeding | Replaceable resin tank with two pouring openings and screw caps. An intelligent mechanical sensor detects resin residue in the vat. Capacity not published; no auto-refill[1] | Not documented |
| Fume extraction | None fitted. Elegoo states compatibility with the separately sold MARS MATE air purifier for odour reduction[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Elegoo Mars 5 product page (technical data and description) 3djake.com · 2026-08 · vendor
- ELEGOO Mars 5 Series collection (live US prices) us.elegoo.com · 2026-08 · vendor
- ELEGOO Mars 5 Series live product feed us.elegoo.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- Elegoo Mars 5 Ultra product page (technical data and description) 3djake.com · 2026-08 · vendor