3D Printing InfoPrinter comparison
ELEGOO Mars 5 vs QIDI X-Plus 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Mars 5 comparisonsMore QIDI X-Plus 3 comparisons
| Property | ELEGOO Mars 5RESIN | QIDI X-Plus 3COREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | QIDI |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Mars 5. Elegoo's own product handle spells the configuration out: mars-5-4k-6-6inch-monochrome-lcd-resin-3d-printer[1][2][3] | QIDI X-Plus 3, listed in QIDI navigation as X-Plus3[4][5] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI on the pages checked (Aug 2026)[4][5] |
| Street price (USD; dated snapshot per entry) | $179.00 on us.elegoo.com against a $225.00 compare-at price (20% off), in stock, checked Aug 2026. The live product feed shows the same $179.00[2][3] | $699 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026. 3DJake lists the model as sold out[5][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold beside the Mars 5 Ultra, which is a materially different machine: 7-inch 9K masking LCD vs 6.6-inch 4K, 18 um vs 35 um pixels, 150 vs 70 mm/h, a 4.0-inch capacitive control screen vs 3.5-inch resistive, and Wi-Fi (the plain Mars 5 is USB only). Elegoo lists ten further Mars 5 / Mars 5 Ultra bundle SKUs pairing the printers with Mercury wash-and-cure stations at $302-$432; those are not printer prices[1][6][2][3] | Two headline-speed figures circulate for this model: QIDI's own US page says 600 mm/s and 35 mm3/s, 3DJake's spec table says <=500 mm/s and 30 mm3/s. This is exactly the kind of sibling contamination the 3-series suffers (X-Max 3 is 600 mm/s / 35 mm3/s). Siblings: X-Max 3 (325x325x315, 900 W) and X-Smart 3 (175x180x170, no chamber heat, 300 °C)[4][5][7][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 143.43 x 89.6 x 150 mm[1] | 280 x 280 x 270 mm advertised[4][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 230 x 230 x 433.5 mm[1] | 511 x 527 x 529 mm[4] |
| Net weight (kg) | Approximately 6.6 kg[1] | 24.3 kg net[4] |
| Frame construction & material | Metal frame with adjustable foot pads[1] | All-metal frame per QIDI's US page; no further breakdown published[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a removable UV-blocking cover[1] | Fully enclosed with a heated chamber[4][5] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent chamber heating (manufacturer claim)[4][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA — UV LCD masked stereolithography. Single Z axis, build plate lifting straight out of the vat (no tilt-release on this model, unlike the Mars 5 Ultra)[1][6] | CoreXY[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis of high-strength steel[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Double Z axis[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | Conflicting manufacturer claims: QIDI's US page says 600 mm/s, 3DJake's spec table says <=500 mm/s. The lower, more conservative figure is used as the sortable value[4][5] |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 (manufacturer claim)[5] |
| Max volumetric flow claimed (mm³/s) | Not documented | Conflicting: 30 mm3/s (3DJake) vs 35 mm3/s (QIDI US page). Lower figure used[4][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | High-flow direct-drive extruder, 1.75 mm filament[4][5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating core. Copper-alloy nozzle head for normal materials, hardened-steel nozzle head for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed[4][5] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate with a quick-release design[1] | Double-sided flexible magnetic RF plate[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling, one click. An intelligent mechanical sensor detects resin residue to prevent LCD damage[1] | Automatic bed levelling; probe technology not named[5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[4][5] |
| Input voltage (110/220 V, switch or auto) | 100-240 V, 50/60 Hz, 24 V 3 A[1] | 100-240 VAC, 50/60 Hz[4] |
| Total rated power draw | Not documented | 800 W rated[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Elegoo. Supported slicers are Voxeldance Tango and CHITUBOX; STL and OBJ accepted[1] | Klipper[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch resistive touchscreen (control panel — not the masking LCD, see W1)[1] | 5-inch touchscreen, 800 x 480[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB only — no Wi-Fi on this model[1] | Wi-Fi (150M 2.4G), Ethernet, USB flash drive[4] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin. Elegoo does not publish a resin compatibility list on this listing[1] | Not documented |
| Safety | ||
| Firmware safety limits (max temp cutoffs — exact values) | Intelligent overheating protection stops printing above 80 °C[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage (QIDI standard store terms)[9] |
| Resin & MSLA | ||
| Masking LCD | 6.6-inch 4K monochrome masking LCD, 4098 x 2560 px, XY pixel pitch 35 x 35 um (manufacturer specification)[1][3] | Not documented |
| Light source | COB LED at 405 nm. Elegoo does not publish an LED count or collimating optics for this model[1] | Not documented |
| Vertical print speedmm/h | 70 mm/h maximum (manufacturer claim). Elegoo does not state the layer height or resin type the figure assumes[1] | Not documented |
| Release film | PFA film with a non-stick surface. No rated life published[1] | Not documented |
| Resin vat & feeding | Replaceable resin tank with two pouring openings and screw caps. An intelligent mechanical sensor detects resin residue in the vat. Capacity not published; no auto-refill[1] | Not documented |
| Fume extraction | None fitted. Elegoo states compatibility with the separately sold MARS MATE air purifier for odour reduction[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Elegoo Mars 5 product page (technical data and description) 3djake.com · 2026-08 · vendor
- ELEGOO Mars 5 Series collection (live US prices) us.elegoo.com · 2026-08 · vendor
- ELEGOO Mars 5 Series live product feed us.elegoo.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Plus 3 official US page qidiusa.com · 2026-08 · vendor
- Elegoo Mars 5 Ultra product page (technical data and description) 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor