3D Printing InfoPrinter comparison
ELEGOO Mars 5 vs INTAMSYS FUNMAT PRO 610 HT
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Mars 5 comparisonsMore INTAMSYS FUNMAT PRO 610 HT comparisons
| Property | ELEGOO Mars 5RESIN | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | INTAMSYS |
| Class | RESIN | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Mars 5. Elegoo's own product handle spells the configuration out: mars-5-4k-6-6inch-monochrome-lcd-resin-3d-printer[1][2][3] | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[4] |
| Street price (USD; dated snapshot per entry) | $179.00 on us.elegoo.com against a $225.00 compare-at price (20% off), in stock, checked Aug 2026. The live product feed shows the same $179.00[2][3] | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold beside the Mars 5 Ultra, which is a materially different machine: 7-inch 9K masking LCD vs 6.6-inch 4K, 18 um vs 35 um pixels, 150 vs 70 mm/h, a 4.0-inch capacitive control screen vs 3.5-inch resistive, and Wi-Fi (the plain Mars 5 is USB only). Elegoo lists ten further Mars 5 / Mars 5 Ultra bundle SKUs pairing the printers with Mercury wash-and-cure stations at $302-$432; those are not printer prices[1][5][2][3] | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[4][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 143.43 x 89.6 x 150 mm[1] | 610 x 508 x 508 mm (24 x 20 x 20 in)[4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 230 x 230 x 433.5 mm[1] | 1710 x 1425 x 2350 mm including the warning lights[4] |
| Net weight (kg) | Approximately 6.6 kg[1] | 1450 kg[4] |
| Frame construction & material | Metal frame with adjustable foot pads[1] | Servo control system on high-precision ball screws; liquid cooling plus fans[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a removable UV-blocking cover[1] | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA — UV LCD masked stereolithography. Single Z axis, build plate lifting straight out of the vat (no tilt-release on this model, unlike the Mars 5 Ultra)[1][5] | Servo-driven ball-screw motion system; two nozzles[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Two nozzles, 1.75 mm filament[4] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 500 °C maximum nozzle temperature (manufacturer specification)[4] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[4] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | Up to 300 °C heated build plate[4] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate with a quick-release design[1] | Flexible build plates with a vacuum adsorption system[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling, one click. An intelligent mechanical sensor detects resin residue to prevent LCD damage[1] | Auto levelling; probe technology not named[4] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[4] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 V, 50/60 Hz, 24 V 3 A[1] | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[4] |
| Total rated power draw | Not documented | 15 kW maximum[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Elegoo. Supported slicers are Voxeldance Tango and CHITUBOX; STL and OBJ accepted[1] | Proprietary; slicing is INTAMSUITE (Windows only)[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch resistive touchscreen (control panel — not the masking LCD, see W1)[1] | 10-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB only — no Wi-Fi on this model[1] | Wi-Fi, Ethernet, USB[4] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin. Elegoo does not publish a resin compatibility list on this listing[1] | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[4] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE, FCC, SGS; safety design to EN60204[4] |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Not documented | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[4] |
| Firmware safety limits (max temp cutoffs — exact values) | Intelligent overheating protection stops printing above 80 °C[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[4] |
| Resin & MSLA | ||
| Masking LCD | 6.6-inch 4K monochrome masking LCD, 4098 x 2560 px, XY pixel pitch 35 x 35 um (manufacturer specification)[1][3] | Not documented |
| Light source | COB LED at 405 nm. Elegoo does not publish an LED count or collimating optics for this model[1] | Not documented |
| Vertical print speedmm/h | 70 mm/h maximum (manufacturer claim). Elegoo does not state the layer height or resin type the figure assumes[1] | Not documented |
| Release film | PFA film with a non-stick surface. No rated life published[1] | Not documented |
| Resin vat & feeding | Replaceable resin tank with two pouring openings and screw caps. An intelligent mechanical sensor detects resin residue in the vat. Capacity not published; no auto-refill[1] | Not documented |
| Fume extraction | None fitted. Elegoo states compatibility with the separately sold MARS MATE air purifier for odour reduction[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Elegoo Mars 5 product page (technical data and description) 3djake.com · 2026-08 · vendor
- ELEGOO Mars 5 Series collection (live US prices) us.elegoo.com · 2026-08 · vendor
- ELEGOO Mars 5 Series live product feed us.elegoo.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Elegoo Mars 5 Ultra product page (technical data and description) 3djake.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor