3D Printing InfoPrinter comparison
ELEGOO Centauri 2 vs Sovol SV08 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Centauri 2 comparisonsMore Sovol SV08 Max comparisons
| Property | ELEGOO Centauri 2COREXY | Sovol SV08 MaxCOREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Sovol |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Centauri 2 (page title "Elegoo Centauri 2 | High-Speed CoreXY 3D Printer")[1] | Sovol SV08 Max 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 24 June 2026 (Shopify publish date)[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $279.00 on us.elegoo.com, Aug 2026, against a compare-at price of $299.00[4] | $1,099.00 on sovol3d.com against a $1,299.00 compare-at price (15% off), in stock, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold both bare and as a Centauri 2 Combo. The Combo is the one with multicolour: 4-colour CANVAS printing, RFID filament detection, auto refill and auto tangle detection are all listed Yes for the Combo and dash for the bare machine, and the Combo body measures 500 x 480 x 586 mm and 15.5 kg against 398 x 404 x 490 mm and 13.7 kg. Camera, LED lighting, air filter and the smart exhaust grille are optional expansions on both. Distinct from the Centauri Carbon line, which is enclosed and takes carbon-fibre filament[1][5] | Much larger sibling of the SV08. Differences that matter in a spec box: 500x500x500 vs 350x350x345, 50 vs 30 mm3/s, TMC5160 XY drivers vs TMC2209, CAN bus, HDMI output, dual 0.4 mm nozzles in the box, and a separately sold chamber-heating module. A chamber heating module for the SV08 Max is listed at $69[2][6][7][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm; printing platform 260 x 260 mm[1] | 500 x 500 x 500 mm advertised[2][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 398 x 404 x 490 mm for the bare Centauri 2 (the Combo is 500 x 480 x 586 mm)[1] | 700 x 710 x 750 mm excluding the spool holder. Shipping cartons: 810 x 820 x 360 mm plus a 775 x 728 x 155 mm enclosure-kit box[2][6] |
| Net weight (kg) | 13.7 kg net, 17.5 kg gross (bare machine; the Combo is 15.5 kg net, 19 kg gross)[1] | Not documented |
| Frame construction & material | Rigid aluminium frame[1] | Aluminium-extrusion CoreXY frame supplied as a kit; Sovol ships it in two cartons, one of which is an enclosure kit[2] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Enclosure kit shipped with the machine (separate carton). A chamber-heating module is sold separately at $69[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with dual 4260 stepper motors driving X and Y independently[1] | CoreXY[2][6] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three lead screws with three linear guide rods[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[1] | Z axis 4 x TMC2209; A axis 1 x TMC5160; B axis 1 x TMC5160. Toolhead communication over CAN bus[2][6] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s or less, with 250 mm/s given as the recommended speed[1] | 700 mm/s maximum (manufacturer claim)[2][6] |
| Recommended/typical print speed | 250 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration; default acceleration 10000 mm/s2[1] | 40,000 mm/s2 maximum (manufacturer claim)[2][6] |
| Max volumetric flow claimed (mm³/s) | Not documented | 50 mm3/s maximum (manufacturer claim)[2][6] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with one fan[1] | Direct drive with auxiliary (assisted) filament feeding[2][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[1] | Ceramic heater. Two 0.4 mm nozzles supplied as standard; 0.4/0.6/0.8 mm optional[2][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature - higher than the enclosed Centauri Carbon's 320 C, even though ELEGOO lists ABS, ASA, PET, PETG-CF, PA and PC as not recommended on this machine[1][5] | <=300 °C claimed[2][6] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature at 25 C ambient[1] | <=100 °C claimed[2][6] |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided spring steel sheet, textured PEI plus a PLA-specific surface[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 121-point auto-levelling plus partial bed levelling, with full-auto calibration[1] | Not stated on the SV08 Max page; the SV08 family uses an inductive sensor plus pressure sensor[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, clog detection, auto filament unloading, fan self-check, part-cooling-fan drop detection and power-loss recovery[1] | Filament runout detection plus filament tangle/clog detection. Sovol does not describe the tangle or clog mechanism[2][6] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Powerful Self-Developed Motherboard" is all ELEGOO publishes[1] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][6] |
| Total rated power draw | 1100 W at 220 V, 350 W at 110 V rated; 24 V output; 100-240 VAC input[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | ELEGOO OS; ElegooSlicer recommended, Orca and Cura supported[1] | Klipper (3DJake's table renders it as "Clipper"). OrcaSlicer is the supported slicer[2][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch colour capacitive touch screen - larger than the 4.3-inch panel on the Centauri Carbon[1][5] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; input formats STL, OBJ, 3MF and STEP[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1] | USB, Wi-Fi 2.4 GHz and 5 GHz, HDMI, Ethernet[2][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | No camera as standard - listed as an optional expansion, as are LED lighting and the air filter[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss resume printing supported; mechanism not published[2][6] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, PLA-CF, TPU. Explicitly not recommended: ABS/ABS-CF, ASA/ASA-CF, PET/PET-CF, PETG-CF, PA/PA-CF, PC[1] | 1.75 mm filament; Sovol does not publish a per-material list on this page[2][6] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- ELEGOO Centauri 2 Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Sovol SV08 Max technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor