3D Printing InfoPrinter comparison
ELEGOO Centauri 2 vs Markforged X7
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Centauri 2 comparisonsMore Markforged X7 comparisons
| Property | ELEGOO Centauri 2COREXY | Markforged X7INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Markforged |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Centauri 2 (page title "Elegoo Centauri 2 | High-Speed CoreXY 3D Printer")[1] | Markforged X7, current generation listed as Gen 2[2][3] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 24 June 2026 (Shopify publish date)[4] | Gen 2 dated 2022[2] |
| Launch MSRP (USD) | Not documented | Approximately $69,900 USD (Aniwaa quotes the same figure in EUR)[2] |
| Street price (USD; dated snapshot per entry) | $279.00 on us.elegoo.com, Aug 2026, against a compare-at price of $299.00[4] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold both bare and as a Centauri 2 Combo. The Combo is the one with multicolour: 4-colour CANVAS printing, RFID filament detection, auto refill and auto tangle detection are all listed Yes for the Combo and dash for the bare machine, and the Combo body measures 500 x 480 x 586 mm and 15.5 kg against 398 x 404 x 490 mm and 13.7 kg. Camera, LED lighting, air filter and the smart exhaust grille are optional expansions on both. Distinct from the Centauri Carbon line, which is enclosed and takes carbon-fibre filament[1][5] | Top of the X series (X3, X5, X7). Markforged's other industrial lines are different machines entirely: FX10 (CA$139,986), FX20 (CA$335,860) and Metal X Gen 2 (CA$153,986). The X7 is a composite FFF machine, not a metal printer. Pricing note: No live USD listing found. CAD Micro lists the X7 (Gen 2) at CA$90,986.00, checked Aug 2026 — Canadian dollars, not USD[3][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm; printing platform 260 x 260 mm[1] | 330 x 270 x 200 mm (Aniwaa records 17.82 L)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 398 x 404 x 490 mm for the bare Centauri 2 (the Combo is 500 x 480 x 586 mm)[1] | 584 x 483 x 914 mm[2] |
| Net weight (kg) | 13.7 kg net, 17.5 kg gross (bare machine; the Combo is 15.5 kg net, 19 kg gross)[1] | 48 kg[2] |
| Frame construction & material | Rigid aluminium frame[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Enclosed industrial cabinet[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with dual 4260 stepper motors driving X and Y independently[1] | Continuous fibre deposition combined with fused filament fabrication[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three lead screws with three linear guide rods[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s or less, with 250 mm/s given as the recommended speed[1] | Not documented |
| Recommended/typical print speed | 250 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration; default acceleration 10000 mm/s2[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with one fan[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature - higher than the enclosed Centauri Carbon's 320 C, even though ELEGOO lists ABS, ASA, PET, PETG-CF, PA and PC as not recommended on this machine[1][5] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | Layer resolution down to 0.05 mm in Z[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature at 25 C ambient[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided spring steel sheet, textured PEI plus a PLA-specific surface[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 121-point auto-levelling plus partial bed levelling, with full-auto calibration[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, clog detection, auto filament unloading, fan self-check, part-cooling-fan drop detection and power-loss recovery[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Powerful Self-Developed Motherboard" is all ELEGOO publishes[1] | Not documented |
| Total rated power draw | 1100 W at 220 V, 350 W at 110 V rated; 24 V output; 100-240 VAC input[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | ELEGOO OS; ElegooSlicer recommended, Orca and Cura supported[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch colour capacitive touch screen - larger than the 4.3-inch panel on the Centauri Carbon[1][5] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; input formats STL, OBJ, 3MF and STEP[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | No camera as standard - listed as an optional expansion, as are LED lighting and the air filter[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, PLA-CF, TPU. Explicitly not recommended: ABS/ABS-CF, ASA/ASA-CF, PET/PET-CF, PETG-CF, PA/PA-CF, PC[1] | Composites with carbon, glass and Kevlar-reinforced polymers; elastomers (TPU); thermoplastics including PLA and PA-CF. Markforged's continuous fibre strands are carbon, fibreglass or Kevlar laid inside Onyx[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[6] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged 3D printer collection (live prices, CAD) shop.cadmicro.com · 2026-08 · vendor
- ELEGOO Centauri 2 Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor