3D Printing InfoPrinter comparison
ELEGOO Centauri 2 vs INTAMSYS FUNMAT PRO 410
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Centauri 2 comparisonsMore INTAMSYS FUNMAT PRO 410 comparisons
| Property | ELEGOO Centauri 2COREXY | INTAMSYS FUNMAT PRO 410INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | INTAMSYS |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Centauri 2 (page title "Elegoo Centauri 2 | High-Speed CoreXY 3D Printer")[1] | Intamsys Funmat Pro 410, described as a dual-extrusion PEEK 3D printer[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 24 June 2026 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $279.00 on us.elegoo.com, Aug 2026, against a compare-at price of $299.00[3] | $27,995.00 at Top 3D Shop, in stock with a 5-10 business-day lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold both bare and as a Centauri 2 Combo. The Combo is the one with multicolour: 4-colour CANVAS printing, RFID filament detection, auto refill and auto tangle detection are all listed Yes for the Combo and dash for the bare machine, and the Combo body measures 500 x 480 x 586 mm and 15.5 kg against 398 x 404 x 490 mm and 13.7 kg. Camera, LED lighting, air filter and the smart exhaust grille are optional expansions on both. Distinct from the Centauri Carbon line, which is enclosed and takes carbon-fibre filament[1][4] | Distinguish from the 610 HT carefully: the 410 has a 90 °C chamber and 160 °C plate, the 610 HT a 300 °C chamber and 300 °C plate. Both quote a 500 °C extruder, so extruder temperature alone will not tell them apart. The 410's two nozzles are asymmetric — one fixed, one on a lift[2][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm; printing platform 260 x 260 mm[1] | 305 x 305 x 406 mm (12 x 12 x 16 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 398 x 404 x 490 mm for the bare Centauri 2 (the Combo is 500 x 480 x 586 mm)[1] | 720 x 680 x 1470 mm[2] |
| Net weight (kg) | 13.7 kg net, 17.5 kg gross (bare machine; the Combo is 15.5 kg net, 19 kg gross)[1] | 220 kg[2] |
| Frame construction & material | Rigid aluminium frame[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Enclosed heated chamber with air filtering[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 90 °C chamber (manufacturer specification, actively heated)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with dual 4260 stepper motors driving X and Y independently[1] | Two nozzles, one fixed and one that lifts out of the way[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three lead screws with three linear guide rods[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s or less, with 250 mm/s given as the recommended speed[1] | Not documented |
| Recommended/typical print speed | 250 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Max travel speed | Not documented | Maximum XY travel speed 500 mm/s (manufacturer figure); maximum XY acceleration 5,000 mm/s2[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration; default acceleration 10000 mm/s2[1] | 5,000 mm/s2 maximum XY acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with one fan[1] | Two nozzles, 1.75 mm filament, with an auto-cleaning station[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature - higher than the enclosed Centauri Carbon's 320 C, even though ELEGOO lists ABS, ASA, PET, PETG-CF, PA and PC as not recommended on this machine[1][4] | 500 °C extruder temperature (manufacturer specification)[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default, 0.6 mm selectable[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature at 25 C ambient[1] | 160 °C platform temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided spring steel sheet, textured PEI plus a PLA-specific surface[1] | Ceramic glass build plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 121-point auto-levelling plus partial bed levelling, with full-auto calibration[1] | Auto-levelling with high-precision sensors; sensor technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, clog detection, auto filament unloading, fan self-check, part-cooling-fan drop detection and power-loss recovery[1] | Filament jam warning and filament absence warning[2] |
| Spool holder location & max spool size; drybox compatibility | Not documented | Heated dry box for filament, up to 70 °C[2] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Air filtering fitted; media not specified. Cooling is water-cooled[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Powerful Self-Developed Motherboard" is all ELEGOO publishes[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 200-240 V / 15 A, 50-60 Hz[2] |
| Total rated power draw | 1100 W at 220 V, 350 W at 110 V rated; 24 V output; 100-240 VAC input[1] | 3 kW maximum[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | ELEGOO OS; ElegooSlicer recommended, Orca and Cura supported[1] | Proprietary; slicing is IntamSuite (Windows only)[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch colour capacitive touch screen - larger than the 4.3-inch panel on the Centauri Carbon[1][4] | 7-inch smart touch panel[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; input formats STL, OBJ, 3MF and STEP[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1] | USB, Wi-Fi, Internet[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | No camera as standard - listed as an optional expansion, as are LED lighting and the air filter[1] | Camera fitted[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-failure recovery supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, PLA-CF, TPU. Explicitly not recommended: ABS/ABS-CF, ASA/ASA-CF, PET/PET-CF, PETG-CF, PA/PA-CF, PC[1] | PEEK, PEKK, PEI, PPSU, PC, nylon, ABS, HIPS, PETG, PLA, PVA and CF-filled grades[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE, SGS, FCC[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[6] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Resolution XY 15.6 um, Z 1.56 um (manufacturer specification)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- ELEGOO Centauri 2 Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor