3D Printing InfoPrinter comparison
ELEGOO Centauri 2 Combo vs Markforged Onyx One
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Centauri 2 Combo comparisonsMore Markforged Onyx One comparisons
| Property | ELEGOO Centauri 2 ComboCOREXY | Markforged Onyx OneINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Markforged |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Centauri 2 Combo - the Centauri 2 sold with the CANVAS multicolour unit[1] | Markforged Onyx One Desktop 3D Printer[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same printer as the bare Centauri 2 for every motion, hotend, bed and electronics figure; what the Combo adds is 4-colour CANVAS printing, RFID filament detection, auto refill and auto tangle detection, and what it costs is bench space - 500 x 480 x 586 mm and 15.5 kg against 398 x 404 x 490 mm and 13.7 kg. Camera, LED lighting and air filter remain optional expansions on both[1] | The defining limitation: the Onyx One prints Onyx only and has NO continuous-fibre reinforcement. The Onyx Pro adds fibreglass, the Mark Two adds the full continuous-fibre range, and the X7 is a much larger industrial machine. Onyx One specifications must never be read from Mark Two or X-series material lists[2][3][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm; printing platform 260 x 260 mm[1] | 12.6 x 5.2 x 6.1 in (approximately 320 x 132 x 155 mm)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 500 x 480 x 586 mm with the CANVAS unit fitted[1] | Not documented |
| Net weight (kg) | 15.5 kg net, 19 kg gross[1] | Not documented |
| Frame construction & material | Rigid aluminium frame (Centauri 2 platform)[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Enclosed desktop cabinet[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with dual 4260 stepper motors[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three lead screws with three linear guide rods[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s or less, recommended 250 mm/s[1] | Not documented |
| Recommended/typical print speed | 250 mm/s recommended printing speed[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration; default 10000 mm/s2[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with one fan[1] | Single extruder — plastic only, no fibre channel[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature at 25 C ambient[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 121-point auto-levelling plus partial bed levelling[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, clog detection, auto tangle detection, RFID filament detection, auto refill, auto filament unloading and power-loss recovery[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | CANVAS four-colour printing with RFID filament identification and automatic refill - the defining difference from the bare Centauri 2[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Powerful Self-Developed Motherboard"[1] | Not documented |
| Total rated power draw | 1100 W at 220 V, 350 W at 110 V rated[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | ELEGOO OS; ElegooSlicer recommended[1] | Proprietary; slicing and print management run in Markforged's cloud-based Eiger software[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch colour capacitive touch screen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; STL, OBJ, 3MF and STEP input[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, PLA-CF, TPU. Not recommended: ABS/ABS-CF, ASA/ASA-CF, PET/PET-CF, PETG-CF, PA/PA-CF, PC[1] | Onyx only — Markforged's nylon filled with chopped carbon fibre. Markforged claims parts 1.4x stronger than ABS and heat deflection to 293 °F (145 °C)[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- Markforged Onyx One desktop composite 3D printer listing exbuild.com · 2026-08 · vendor
- Markforged Mark Two (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor