3D Printing InfoPrinter comparison
Creality K2 Pro vs UniFormation GKtwo
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality K2 Pro comparisonsMore UniFormation GKtwo comparisons
| Property | Creality K2 ProCOREXY | UniFormation GKtwoRESIN |
|---|---|---|
| Identity | ||
| Brand | Creality | UniFormation |
| Class | COREXY | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality K2 Pro[1] | UniFormation GKtwo 10.3" 8K Resin Printer[2][3] |
| Street price (USD; dated snapshot per entry) | $599.00 and $799.00 are the two variant prices listed on the Creality US store K2 Pro Combo page, Aug 2026 - the combo includes a CFS unit, so neither figure is a bare-printer price[4] | $749.99 on uniformation3d.com but marked Sold out, checked Aug 2026 (the page shows a compare-at price of $0.00, i.e. none set)[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Between the K2 (260 mm cube, no chamber heating, 100 C bed, 8 GB) and the K2 Plus (350 mm cube, 350 C nozzle, 120 C bed, 30000 mm/s2, dual filters, auto belt tensioning, 1080p camera, dual-band Wi-Fi). The K2 Pro shares the K2's 300 C nozzle and 70 W hotend but gets the chamber heater, RFID reader, Ethernet and 32 GB storage[1] | UniFormation lists GKtwo variants by region and bundle (GKtwo ALL, GKtwo ALL UK) rather than by hardware, so the hardware specification is common; what changes is what ships in the box. Not to be confused with the earlier GKone[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm[1] | 228 x 128 x 245 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 445 x 477 x 573 mm[1] | 350 x 315 x 455 mm[2][3] |
| Net weight (kg) | 23.7 kg[1] | 20 kg packaged (UniFormation publishes package weight, not net weight)[2][3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with chamber temperature control up to 60 C; one air filter[1] | Open-frame MSLA with a UV-blocking cover[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 C max chamber temperature (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[1] | MSLA — photocuring LCD, single Z axis, straight-lift peel[2][3] |
| Belts (type, width, e.g. Gates?) | Manual belt tensioning[1] | Not documented |
| Stepper motors (frame size, step angle, brand if known) | Step-servo motors on the X and Y axes and the extruder[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (manufacturer claim)[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | Not documented |
| Heater cartridge power (W) | 70 W rated hotend power[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heatbed temperature[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Smart auto levelling, plus automatic flow-rate calibration using a nozzle AI camera[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | One auxiliary cooling fan and one air filter[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 110/220 V[2][3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[5][6][1] | Not named. Slicers: CHITUBOX, the GKtwo slicer, and Lychee. File format STL[2][3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4-inch touchscreen[1] | 5-inch touchscreen (control panel — not the masking LCD, see W1)[2][3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with alarm sounds and a built-in RFID reader for automatic filament identification (needs Creality RFID filament)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz, RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[1] | USB file transfer[2][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | One chamber camera at 720p 30 fps, plus a separate nozzle AI camera used for flow calibration[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[1] | 402.5-405 nm photopolymer resin. No closed compatibility list published[2][3] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[5][6] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[7] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Printing tolerance +/-0.1 mm for lengths up to 100 mm, +/-0.1% beyond — a manufacturer specification, not an independent measurement[2] |
| Resin & MSLA | ||
| Masking LCD | Not documented | 10.3-inch masking LCD, 7680 x 4320 px (8K), XY pixel pitch 29.6 um (manufacturer specification)[2][3] |
| Light source | Not documented | Photocuring LCD light engine at 402.5-405 nm. UniFormation does not publish the LED count or optical design on this page[2][3] |
| Layer exposure times | Not documented | 2-3 s per layer at 0.05 mm layer height (manufacturer figure — one of the few makers here that states the layer height its exposure figure assumes). Sortable value is the midpoint[2][3] |
| Layer height range | Not documented | 0.03, 0.05 and 0.1 mm (three discrete settings, not a continuous range)[2][3] |
| Resin vat & feeding | Not documented | Resin vat capacity 0.7 kg, with built-in resin heating: UniFormation quotes warming to 95 F (35 C) in 8 minutes from 50 F. No auto-refill and no level sensing published[2][3] |
| Fume extraction | Not documented | Built-in odour filter[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- UniFormation GKtwo 10.3" 8K resin printer product page uniformation3d.com · 2026-08 · vendor
- UniFormation GKtwo technical data table 3djake.com · 2026-08 · vendor
- Creality US store - K2 Pro Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor