3D Printing InfoPrinter comparison
Creality K2 Pro vs QIDI X-Max 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality K2 Pro comparisonsMore QIDI X-Max 3 comparisons
| Property | Creality K2 ProCOREXY | QIDI X-Max 3COREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | QIDI |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality K2 Pro[1] | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[2][3] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[2] |
| Street price (USD; dated snapshot per entry) | $599.00 and $799.00 are the two variant prices listed on the Creality US store K2 Pro Combo page, Aug 2026 - the combo includes a CFS unit, so neither figure is a bare-printer price[4] | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[2][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Between the K2 (260 mm cube, no chamber heating, 100 C bed, 8 GB) and the K2 Plus (350 mm cube, 350 C nozzle, 120 C bed, 30000 mm/s2, dual filters, auto belt tensioning, 1080p camera, dual-band Wi-Fi). The K2 Pro shares the K2's 300 C nozzle and 70 W hotend but gets the chamber heater, RFID reader, Ethernet and 32 GB storage[1] | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[3][6][7][8] |
| Market position: superseded? successor announced? | Not documented | Discontinued and out of production; QIDI directs buyers to the Max4[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm[1] | 325 x 325 x 315 mm advertised[2][3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 445 x 477 x 573 mm[1] | 553 x 553 x 601 mm[3][5] |
| Net weight (kg) | 23.7 kg[1] | 30.2 kg net[3][5] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with chamber temperature control up to 60 C; one air filter[1] | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 C max chamber temperature (manufacturer figure)[1] | 65 °C maximum, independent chamber heating (manufacturer claim)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[1] | CoreXY[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis (polished steel rod) of high-strength steel[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Double Z axis[3] |
| Belts (type, width, e.g. Gates?) | Manual belt tensioning[1] | Not documented |
| Stepper motors (frame size, step angle, brand if known) | Step-servo motors on the X and Y axes and the extruder[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim)[1] | <=600 mm/s (manufacturer claim)[2][3][5] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (manufacturer claim)[1] | 20,000 mm/s2 (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 35 mm3/s extruder flow (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[2][3] |
| Gear ratio & drive gear material | Not documented | 9.5:1[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | <=350 °C claimed[2][3][5] |
| Heater cartridge power (W) | 70 W rated hotend power[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heatbed temperature[1] | <=120 °C claimed[3][5] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided flexible magnetic plate (QIDI's "HF" plate)[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Smart auto levelling, plus automatic flow-rate calibration using a nozzle AI camera[1] | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | One auxiliary cooling fan and one air filter[1] | Not documented |
| Auxiliary part-cooling fan? | Not documented | Additional (auxiliary) cooling fan fitted[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Chamber circulation blower with activated-carbon air filter[3] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2][3] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[3] |
| Total rated power draw | Not documented | 900 W rated[3][5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[9][10][1] | Klipper with the Fluidd web console. Fork and version not published[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4-inch touchscreen[1] | 5-inch touchscreen, 800 x 480[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with alarm sounds and a built-in RFID reader for automatic filament identification (needs Creality RFID filament)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz, RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[1] | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | One chamber camera at 720p 30 fps, plus a separate nozzle AI camera used for flow calibration[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[1] | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[5] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[9][10] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[11] | 1-year coverage[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Creality US store - K2 Pro Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor