3D Printing InfoPrinter comparison
Creality K2 Pro vs INTAMSYS FUNMAT PRO 610 HT
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality K2 Pro comparisonsMore INTAMSYS FUNMAT PRO 610 HT comparisons
| Property | Creality K2 ProCOREXY | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Creality | INTAMSYS |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality K2 Pro[1] | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[2] |
| Street price (USD; dated snapshot per entry) | $599.00 and $799.00 are the two variant prices listed on the Creality US store K2 Pro Combo page, Aug 2026 - the combo includes a CFS unit, so neither figure is a bare-printer price[3] | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Between the K2 (260 mm cube, no chamber heating, 100 C bed, 8 GB) and the K2 Plus (350 mm cube, 350 C nozzle, 120 C bed, 30000 mm/s2, dual filters, auto belt tensioning, 1080p camera, dual-band Wi-Fi). The K2 Pro shares the K2's 300 C nozzle and 70 W hotend but gets the chamber heater, RFID reader, Ethernet and 32 GB storage[1] | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm[1] | 610 x 508 x 508 mm (24 x 20 x 20 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 445 x 477 x 573 mm[1] | 1710 x 1425 x 2350 mm including the warning lights[2] |
| Net weight (kg) | 23.7 kg[1] | 1450 kg[2] |
| Frame construction & material | Not documented | Servo control system on high-precision ball screws; liquid cooling plus fans[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with chamber temperature control up to 60 C; one air filter[1] | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 C max chamber temperature (manufacturer figure)[1] | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[1] | Servo-driven ball-screw motion system; two nozzles[2] |
| Belts (type, width, e.g. Gates?) | Manual belt tensioning[1] | Not documented |
| Stepper motors (frame size, step angle, brand if known) | Step-servo motors on the X and Y axes and the extruder[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim)[1] | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Two nozzles, 1.75 mm filament[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | 500 °C maximum nozzle temperature (manufacturer specification)[2] |
| Heater cartridge power (W) | 70 W rated hotend power[1] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heatbed temperature[1] | Up to 300 °C heated build plate[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible build plates with a vacuum adsorption system[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Smart auto levelling, plus automatic flow-rate calibration using a nozzle AI camera[1] | Auto levelling; probe technology not named[2] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | One auxiliary cooling fan and one air filter[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[2] |
| Total rated power draw | Not documented | 15 kW maximum[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[5][6][1] | Proprietary; slicing is INTAMSUITE (Windows only)[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4-inch touchscreen[1] | 10-inch touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with alarm sounds and a built-in RFID reader for automatic filament identification (needs Creality RFID filament)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz, RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[1] | Wi-Fi, Ethernet, USB[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | One chamber camera at 720p 30 fps, plus a separate nozzle AI camera used for flow calibration[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[1] | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[5][6] | Not documented |
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE, FCC, SGS; safety design to EN60204[2] |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Not documented | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[7] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Creality US store - K2 Pro Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor