3D Printing InfoPrinter comparison
Creality K2 Plus vs INTAMSYS FUNMAT HT Enhanced
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality K2 Plus comparisonsMore INTAMSYS FUNMAT HT Enhanced comparisons
| Property | Creality K2 PlusCOREXY | INTAMSYS FUNMAT HT EnhancedINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Creality | INTAMSYS |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality K2 Plus[1] | Intamsys Funmat HT Enhanced, product number M-QRS-2X8E[2] |
| Street price (USD; dated snapshot per entry) | $999.00 on store.creality.com, Aug 2026[3] | $6,995.00 at Top 3D Shop, reduced from $8,995.00, in stock, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Largest and only fully specified K2. It is the only one with a 350 C nozzle, a 120 C bed, 30000 mm/s2 acceleration, step-servo motors on Z as well as X/Y, automatically adjusted belt tension, two auxiliary cooling fans, two air filters, a 1080p chamber camera, dual-band Wi-Fi and a 4.3-inch screen. Its "smart auto levelling" is listed as arriving via firmware update rather than shipping enabled, unlike the K2 and K2 Pro. A separate K2 SE model also exists[1] | Two extruder configurations with very different ceilings: standard up to 300 °C, high-temperature up to 450 °C. A quoted "450 °C" applies only to the HT extruder. Larger siblings Funmat Pro 410 (305x305x406, 500 °C, dual nozzle) and Funmat Pro 610HT (610x508x508, 300 °C chamber) are separate machines[2][4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 350 mm[1] | 260 x 260 x 260 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 495 x 515 x 640 mm[1] | 530 x 500 x 530 mm[2] |
| Net weight (kg) | 35 kg[1] | 167 lb (approximately 76 kg)[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with chamber temperature control up to 60 C and two air filters[1] | Heated, enclosed build chamber with an in-chamber camera[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 C max chamber temperature (manufacturer figure)[1] | 90 °C heated chamber (manufacturer specification for an actively heated chamber)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[1] | Not documented |
| Belts (type, width, e.g. Gates?) | Automatically adjusted belt tension - the K2 and K2 Pro are tensioned by hand[1] | Not documented |
| Stepper motors (frame size, step angle, brand if known) | Step-servo motors on the X, Y and Z axes and the extruder[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim)[1] | 30-300 mm/s print speed range (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 30000 mm/s2 max acceleration (manufacturer claim) - 50% above the rest of the K2 family[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a 0.4 mm hardened "unicorn" quick-swap nozzle[6] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | Standard extruder up to 300 °C; high-temperature extruder up to 450 °C[2] |
| Heater cartridge power (W) | 100 W rated hotend power[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | 160 °C platform temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Coated steel flex plate, heated, removable[6] | Aluminium plate with high-borosilicate glass[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Smart auto levelling listed as "Available via Firmware Update" rather than shipping enabled; automatic flow-rate calibration via the nozzle AI camera[1] | Automatic bed levelling; probe technology not stated[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[6] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two auxiliary cooling fans and two air filters[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[7][8][1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with a built-in RFID reader; Creality notes the K2 Plus has no alarm sounds, which the K2 and K2 Pro do have[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi (2.4 and 5 GHz), RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | One chamber camera at 1080p 30 fps plus the nozzle AI camera[1] | In-chamber camera[2] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[1] | PEEK, PEI, PEKK, PPSU, PA/CF, PC, PC alloys, PA, ABS, carbon-fibre-filled, metal-filled, fibreglass-filled, ASA, PETG, ESD-safe, HIPS, TPU, PLA, PVA[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[7][8] | Not documented |
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | FCC and CE[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[9] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Position accuracy X/Y 12.5 um, Z 1.25 um (manufacturer specification, not an independent measurement)[2] |
| Benchmark print times (source + settings) | Benchy in 15 minutes 56 seconds - independently measured by Tom's Hardware, which noted visible layer lines and slightly droopy overhangs at that speed[6] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[6] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- Intamsys Funmat HT Enhanced product listing top3dshop.com · 2026-08 · vendor
- Creality US store - K2 Plus 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Tom's Hardware - Creality K2 Plus Review (spec box and measured Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor