3D Printing InfoPrinter comparison
Creality Hi vs QIDI X-Max 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Hi comparisonsMore QIDI X-Max 3 comparisons
| Property | Creality HiBEDSLINGER | QIDI X-Max 3COREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Hi, sold as the "Creality Hi Combo" with one CFS unit[1] | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[2][3] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[2] |
| Street price (USD; dated snapshot per entry) | The Creality US store Hi Combo page lists three variant prices - $299.00, $399.00 and $539.00 - on the same page, Aug 2026; the lowest is recorded here and the combo includes one CFS unit[4] | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[2][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold as a combo bundled with one CFS multi-material unit; up to four CFS units can be stacked for 16 colours, and the extra three are bought separately. Three price variants exist on the store page, so a single "Creality Hi" price is ambiguous[1] | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[3][6][7][8] |
| Market position: superseded? successor announced? | Not documented | Discontinued and out of production; QIDI directs buyers to the Max4[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 300 mm[1] | 325 x 325 x 315 mm advertised[2][3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 409 x 392 x 477 mm (Tom's Hardware measurement of the printer's footprint)[9] | 553 x 553 x 601 mm[3][5] |
| Net weight (kg) | 11.58 kg (Tom's Hardware measurement)[9] | 30.2 kg net[3][5] |
| Frame construction & material | Full metal body with frame parts die-cast from aluminium alloy[1] | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C maximum, independent chamber heating (manufacturer claim)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis (polished steel rod) of high-strength steel[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Double Z axis[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim)[1] | <=600 mm/s (manufacturer claim)[2][3][5] |
| Max acceleration (claimed, mm/s²) | 12000 mm/s2 max acceleration (manufacturer claim)[1] | 20,000 mm/s2 (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 35 mm3/s extruder flow (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Modular direct-drive extruder, which Creality markets as clog-free and designed for repairability[1] | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[2][3] |
| Gear ratio & drive gear material | Not documented | 9.5:1[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 0.4 mm high-flow hardened steel "unicorn" quick-swap nozzle[9] | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature (Tom's Hardware)[9] | <=350 °C claimed[2][3][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed[3][5] |
| Bed surface (material, texture, coating), single/double-sided | Two-sided epoxy-resin flexible build plate, heated[9] | Double-sided flexible magnetic plate (QIDI's "HF" plate)[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling, plus automatic filament load and unload[1] | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[9] | Filament detection fitted; type and location not published[3] |
| Multi-material/multi-color capability or official upgrade path | Pairs with up to four CFS units for up to 16 colours; the combo ships with one CFS. Multi-material also enables snap-away support material[1] | Not documented |
| Cooling & Air Handling | ||
| Auxiliary part-cooling fan? | Not documented | Additional (auxiliary) cooling fan fitted[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Chamber circulation blower with activated-carbon air filter[3] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2][3] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[3] |
| Total rated power draw | Not documented | 900 W rated[3][5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper-derived firmware - Creality publishes the source as CrealityOfficial/Hi_Klipper on GitHub, GPL-3.0, last pushed March 2026[10][11] | Klipper with the Fluidd web console. Fork and version not published[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.2-inch touchscreen, pre-assembled and foldable to shrink the footprint[1] | 5-inch touchscreen, 800 x 480[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with input shaping, alarm sounds and auto filament identification via the built-in RFID reader (needs Creality RFID filament)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, LAN, cloud and app[9] | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | 95% pre-assembled[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG (Tom's Hardware's materials line for the Hi Combo)[9] | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[5] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes CrealityOfficial/Hi_Klipper (GPL-3.0) for this model; upstream Klipper ships the verify_heater thermal-runaway check, but the stock configuration was not checked here[10][11] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[12] | 1-year coverage[2] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 32 minutes 33 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[9] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 3.5 out of 5 in the page's structured data - the lowest score of any Creality machine recorded here[9] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Hi Combo product page creality.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Creality US store - Creality Hi Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Tom's Hardware - Creality Hi Combo review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/Hi_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor