3D Printing InfoPrinter comparison
Creality Hi vs FlashForge Creator 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Hi comparisonsMore FlashForge Creator 4 comparisons
| Property | Creality HiBEDSLINGER | FlashForge Creator 4IDEX |
|---|---|---|
| Identity | ||
| Brand | Creality | FlashForge |
| Class | BEDSLINGER | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Hi, sold as the "Creality Hi Combo" with one CFS unit[1] | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[2] |
| Street price (USD; dated snapshot per entry) | The Creality US store Hi Combo page lists three variant prices - $299.00, $399.00 and $539.00 - on the same page, Aug 2026; the lowest is recorded here and the combo includes one CFS unit[3] | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold as a combo bundled with one CFS multi-material unit; up to four CFS units can be stacked for 16 colours, and the extra three are bought separately. Three price variants exist on the store page, so a single "Creality Hi" price is ambiguous[1] | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 300 mm[1] | 400 x 350 x 500 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 409 x 392 x 477 mm (Tom's Hardware measurement of the printer's footprint)[4] | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[2] |
| Net weight (kg) | 11.58 kg (Tom's Hardware measurement)[4] | 90 kg net[2] |
| Frame construction & material | Full metal body with frame parts die-cast from aluminium alloy[1] | Fully enclosed professional chassis on a stand[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively controlled (manufacturer claim)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | IDEX — two independently driven extruders on the same gantry[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim)[1] | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[2] |
| Max acceleration (claimed, mm/s²) | 12000 mm/s2 max acceleration (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Modular direct-drive extruder, which Creality markets as clog-free and designed for repairability[1] | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 0.4 mm high-flow hardened steel "unicorn" quick-swap nozzle[4] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature (Tom's Hardware)[4] | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 130 °C maximum (manufacturer claim)[2] |
| Bed surface (material, texture, coating), single/double-sided | Two-sided epoxy-resin flexible build plate, heated[4] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling, plus automatic filament load and unload[1] | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[4] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Two spool bays, 1 kg and 2 kg capacity[2] |
| Multi-material/multi-color capability or official upgrade path | Pairs with up to four CFS units for up to 16 colours; the combo ships with one CFS. Multi-material also enables snap-away support material[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[2] |
| Total rated power draw | Not documented | 2320 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper-derived firmware - Creality publishes the source as CrealityOfficial/Hi_Klipper on GitHub, GPL-3.0, last pushed March 2026[5][6] | Not named; the supported slicer is FlashPrint[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.2-inch touchscreen, pre-assembled and foldable to shrink the footprint[1] | 7-inch touchscreen, 1024 x 600[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with input shaping, alarm sounds and auto filament identification via the built-in RFID reader (needs Creality RFID filament)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, LAN, cloud and app[4] | USB flash drive, Ethernet, Wi-Fi[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | 95% pre-assembled[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG (Tom's Hardware's materials line for the Hi Combo)[4] | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes CrealityOfficial/Hi_Klipper (GPL-3.0) for this model; upstream Klipper ships the verify_heater thermal-runaway check, but the stock configuration was not checked here[5][6] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[7] | 12 months on the printer, 3 months on extruder parts[2] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 32 minutes 33 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[4] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 3.5 out of 5 in the page's structured data - the lowest score of any Creality machine recorded here[4] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Hi Combo product page creality.com · 2026-08 · vendor
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- Creality US store - Creality Hi Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Hi Combo review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/Hi_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor