3D Printing InfoPrinter comparison
Creality Ender-5 Max vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-5 Max comparisonsMore Snapmaker Artisan comparisons
| Property | Creality Ender-5 MaxCOREXY | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | Creality | Snapmaker |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-5 Max[1] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[2] |
| Street price (USD; dated snapshot per entry) | $749.00 on store.creality.com, Aug 2026[3] | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A cube-frame CoreXY machine where the bed drops in Z - Creality itself calls the class "bed droppers". Do not read Ender-3 V3 figures across: this is a 400 mm cube at 700 mm/s claimed, on a different frame entirely. An optional enclosure is sold for engineering filaments[1] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 400 x 400 x 400 mm[1] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[2] |
| Net weight (kg) | Not documented | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame as sold; Creality offers an optional enclosure to raise ambient temperature for engineering filaments[1] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY on a rigid all-metal frame, with the bed moving in Z (Creality's own term is a "bed dropper")[1] | IDEX — two independently driven print heads[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Precise linear rail on the X axis[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Z axis assisted by two linear rods[1] | Z-axis lead 8 mm; X and Y leads 40 mm[2] |
| Stepper motors (frame size, step angle, brand if known) | 42-76 stepper motors on both the X and Y axes[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 700 mm/s max printing speed (Creality Lab claim, with Hyper Series filament recommended for quality at speed); the page also quotes 500 mm/s in the same block, so the two figures need care[1] | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (Creality Lab claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder with dual tempered gears, which Creality says passed 500 hours of continuous-extrusion durability testing[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C maximum (manufacturer claim)[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided textured PEI sheet[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 64-point fully automatic bed levelling[1] | Not documented |
| Electronics & Power | ||
| Total rated power draw | Not documented | Integrated controller rated 300 W + 450 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 7-inch touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | WLAN multi-printer management for print farms, with a tri-colour indicator light[1] | Wi-Fi, USB cable, USB flash drive[2] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[4] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-5 Max product page creality.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- Creality US store - Ender-5 Max 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor