3D Printing InfoPrinter comparison
Creality Ender-5 Max vs ELEGOO Neptune 4 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-5 Max comparisonsMore ELEGOO Neptune 4 Plus comparisons
| Property | Creality Ender-5 MaxCOREXY | ELEGOO Neptune 4 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Creality | ELEGOO |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-5 Max[1] | ELEGOO Neptune 4 Plus[2] |
| Release date (announcement and actual shipping) | Not documented | Listed on the ELEGOO US store from 20 September 2023 (Shopify publish date), the same date as the Neptune 4 Max[3][4] |
| Street price (USD; dated snapshot per entry) | $749.00 on store.creality.com, Aug 2026[5] | $309.00 on us.elegoo.com, Aug 2026, against a compare-at price of $425.00. Only a Ribbon-Cable printhead variant is listed for the Plus, unlike the Neptune 4 and 4 Max which also offer a Type-C version[3][6][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A cube-frame CoreXY machine where the bed drops in Z - Creality itself calls the class "bed droppers". Do not read Ender-3 V3 figures across: this is a 400 mm cube at 700 mm/s claimed, on a different frame entirely. An optional enclosure is sold for engineering filaments[1] | Middle model of the Neptune 4 family. Against the base Neptune 4: bigger (320 x 320 x 385 mm), but a lower bed ceiling (100 C rather than 110 C) and much lower acceleration (12000 rather than 20000 mm/s2). Against the Max: smaller and lighter (14.4 kg against 18.1 kg) but with a higher bed ceiling (100 C against 85 C) and higher acceleration (12000 against 8000). Its Z drive is 2 lead screws with 2 tie rods, where the Centauri machines use 3 lead screws[2][7][8][9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 400 x 400 x 400 mm[1] | 320 x 320 x 385 mm; printing platform 330 x 330 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 533 x 517 x 638 mm; ELEGOO also publishes a maximum size for machine activity of 578 x 750 x 860 mm including rack and tray, so allow 750 mm of depth[2] |
| Net weight (kg) | Not documented | 14.4 kg net, 16.65 kg gross[2] |
| Frame construction & material | Not documented | CNC-machined aluminium extrusion frame (Neptune 4 family)[7] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame as sold; Creality offers an optional enclosure to raise ambient temperature for engineering filaments[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY on a rigid all-metal frame, with the bed moving in Z (Creality's own term is a "bed dropper")[1] | Cartesian i3 bed-slinger[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Precise linear rail on the X axis[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Z axis assisted by two linear rods[1] | Two lead screws with two tie rods[2] |
| Stepper motors (frame size, step angle, brand if known) | 42-76 stepper motors on both the X and Y axes[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)" is all ELEGOO publishes; the driver part number is not given on the product page[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 700 mm/s max printing speed (Creality Lab claim, with Hyper Series filament recommended for quality at speed); the page also quotes 500 mm/s in the same block, so the two figures need care[1] | 30-500 mm/s printing speed, with 250 mm/s given by ELEGOO as the recommended figure - the 500 mm/s number is a ceiling, not a working speed[2] |
| Recommended/typical print speed | Not documented | 250 mm/s recommended printing speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (Creality Lab claim)[1] | 12000 mm/s2 maximum acceleration; default acceleration 5000 mm/s2[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder with dual tempered gears, which Creality says passed 500 hours of continuous-extrusion durability testing[1] | Dual-gear direct extruder with 2 fans (the Centauri machines use a 1-fan version)[2][9] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass nozzle, 0.4 mm, with a titanium-alloy heat break[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 C max heated bed temperature at 25 C ambient[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | PEI spring steel sheet; ELEGOO notes it is now upgraded to a dual-sided textured PEI + PLA-specific surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 64-point fully automatic bed levelling[1] | Manual levelling combined with 121-point auto-levelling[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor and power-loss recovery; no camera, no clog detection, no auto filament unloading[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | ELEGOO describes it only as a "Klipper High-Speed Quiet Motherboard" - no board model or MCU is published[2] |
| Total rated power draw | Not documented | 320 W rated power; 24 V output; 110-120 V / 220-240 V input[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper (ELEGOO names the system "Klipper" outright for the Neptune 4 Plus, rather than the ELEGOO OS branding used on the Centauri machines)[2][9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch colour capacitive touch screen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Colour capacitive touch UI; ElegooSlicer is recommended, with Orca and Cura also supported[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | WLAN multi-printer management for print farms, with a tri-colour indicator light[1] | USB, LAN and Wi-Fi[2] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, TPU, PETG, ABS, ASA, Nylon[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Operating sound is published as 65 dB or less - a manufacturer figure with no measuring distance or method given, so it is not comparable with a reviewer's dB reading[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[11] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-5 Max product page creality.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- Creality US store - Ender-5 Max 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- ELEGOO Neptune 4 Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor