3D Printing InfoPrinter comparison
Creality Ender-3 V4 vs QIDI Plus4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V4 comparisonsMore QIDI Plus4 comparisons
| Property | Creality Ender-3 V4BEDSLINGER | QIDI Plus4COREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V4[1] | QIDI Plus4, sold as "Plus4 3D Printer". QIDI's own wiki files it under X-Plus4[2][3] |
| Release date (announcement and actual shipping) | Not documented | Announced September 2024; QIDI ran launch promotional pricing in the week of 20-27 September 2024 (secondary reporting, not a QIDI press release)[4] |
| Street price (USD; dated snapshot per entry) | $369.00 for the Ender-3 V4 Combo on store.creality.com, Aug 2026 - the combo includes the CFS filament system, so this is not a bare-printer price[5] | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold as a combo with the CFS multi-material unit. Build volume is 220 x 220 x 235 mm, which is neither the SE/V3's 250 mm nor the KE's 240 mm Z height - three different Z heights across four Ender-3 V3/V4 machines. Several features (filament tangle detection, RFID filament identification) are conditional on the CFS being fitted[1][6][7] | Two purchasable variants: Plus4 + Filament x1 at $649 and Plus4 Combo + Filament x1 at $799 (Combo adds the QIDI Box multi-material unit). Distinct from the older X-Plus 3 (280x280x270, 350 °C) and from the newer Plus5 (320x320x300)[3][2] |
| Market position: superseded? successor announced? | Not documented | Superseded at the top of the large-format line by the Plus5, launched 5 August 2026 with 18% more build volume; Plus4 still listed and in stock Aug 2026[8][9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 235 mm[1] | 305 x 305 x 280 mm advertised. No independently measured usable envelope found[2][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 396 x 359 x 456 mm for the printer alone; 838 x 396 x 456 mm for the combo with the CFS beside it - the combo needs more than twice the bench width[1] | 505 x 487 x 550 mm[4] |
| Net weight (kg) | 6.8 kg (printer net weight)[1] | 32 kg gross (3DJake). QIDI does not publish a net weight on the product page[4] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis with double-layer chamber insulation; QIDI does not publish a frame material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed, double-layer insulated chamber with second-generation active heating to 65 °C[2][4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, actively heated by a 400 W heater which QIDI says reaches setpoint in about 8 minutes (manufacturer claim)[2][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual independent Z motors on 10 mm linear shafts and screws[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim)[1] | 600 mm/s (manufacturer claim, tool-head maximum)[4] |
| Max acceleration (claimed, mm/s²) | 12000 mm/s2 max acceleration (manufacturer claim)[1] | <=20,000 mm/s2 (manufacturer claim)[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct-drive extruder[1] | Direct drive with hardened steel dual gears, 1.75 mm filament[2][4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Second-generation 80 W bimetal hotend with a multi-metal composite hardened-tip nozzle; 0.4 mm standard, 0.2/0.5/0.8 mm optional[2][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | <=370 °C claimed. No firmware max_temp verified for this model[2][4] |
| Heater cartridge power (W) | Not documented | 80 W hotend heater (manufacturer figure)[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heatbed temperature[1] | Conflicting manufacturer figures: QIDI's own Plus4 page states a 100 °C bed temperature, 3DJake's spec table states <=120 °C. Not resolved; the lower vendor-published figure is used as the sortable value[2][4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | 6 mm aluminium-substrate heated bed with a double-sided textured PEI plate[2][4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Full-auto calibration; QIDI markets "hands-free automatic" levelling and does not name the probe technology on the product page[2][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Power-loss recovery, automatic filament relay and filament tangle detection (tangle detection only with the CFS fitted)[1] | Filament run-out sensor, plus a filament cutter and filament tangle detection (tangle mechanism not described)[4] |
| Multi-material/multi-color capability or official upgrade path | CFS compatible - RFID filament identification and multi-filament printing with the Creality Filament System[1] | QIDI Box multi-material unit supported; sold bundled as the Plus4 Combo[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Auxiliary part-cooling fan plus a chamber circulation fan; fan sizes and duct design not published[4] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[4] |
| Total rated power draw | Rated power 900 W; input 100-240 V AC 50/60 Hz[1] | 450 W plus 400 W for chamber heating (rated)[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper v0.12, described by QIDI as open source. Fork details and current release not published on the product page[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.8-inch colour touchscreen[1] | 5-inch touchscreen, 800 x 480[2][4] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; input shaping and a lighting kit are listed as standard[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB drive, Wi-Fi and Creality Cloud file transfer[1] | Wi-Fi 2.4 GHz, Ethernet, USB[2][4] |
| Cloud service & phone app; LAN-only mode possible? | Not documented | Mobile and computer control, remote cloud or LAN-only operation[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in low-frame-rate camera, up to 1080p, timelapse supported[2][4] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | QIDI claims about 10 minutes from unbox to printing[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[4] |
| Materials Support | ||
| Officially supported filament list | Hyper-PLA, PLA, PETG, TPU 95A, ABS, ASA, PLA-CF, PA-CF[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, PA-CF/GF, PET-CF/GF, PPA-CF/GF, PPS-CF and other CF/GF-filled polymers[2][4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | 1-year coverage, 14-day no-reason return, 30-day price protection[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- QIDI Plus4 product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Plus4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus4 technical data table 3djake.com · 2026-08 · vendor
- Creality US store - Ender-3 V4 Combo 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 KE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor