3D Printing InfoPrinter comparison
Creality Ender-3 V4 vs FlashForge Creator 5 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V4 comparisonsMore FlashForge Creator 5 Pro comparisons
| Property | Creality Ender-3 V4BEDSLINGER | FlashForge Creator 5 ProTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Creality | FlashForge |
| Class | BEDSLINGER | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V4[1] | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[4][5] |
| Launch MSRP (USD) | Not documented | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[4][5] |
| Street price (USD; dated snapshot per entry) | $369.00 for the Ender-3 V4 Combo on store.creality.com, Aug 2026 - the combo includes the CFS filament system, so this is not a bare-printer price[6] | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold as a combo with the CFS multi-material unit. Build volume is 220 x 220 x 235 mm, which is neither the SE/V3's 250 mm nor the KE's 240 mm Z height - three different Z heights across four Ender-3 V3/V4 machines. Several features (filament tangle detection, RFID filament identification) are conditional on the CFS being fitted[1][7][8] | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[2][4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 235 mm[1] | 256 x 256 x 256 mm[4][5][9] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 396 x 359 x 456 mm for the printer alone; 838 x 396 x 456 mm for the combo with the CFS beside it - the combo needs more than twice the bench width[1] | Not documented |
| Net weight (kg) | 6.8 kg (printer net weight)[1] | Not documented |
| Frame construction & material | Not documented | Rigid frame with a fully sealed enclosure; no dimensions or weight published[2][5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[2][4][5] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[2][4][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY with four independent FlashSwap toolheads[4][5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim)[1] | 600 mm/s maximum (manufacturer claim)[2][4][5] |
| Max acceleration (claimed, mm/s²) | 12000 mm/s2 max acceleration (manufacturer claim)[1] | 30,000 mm/s2 maximum (manufacturer claim)[4][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct-drive extruder[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel nozzles as standard[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heatbed temperature[1] | 120 °C maximum (manufacturer claim)[5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Fully automatic calibration and levelling; probe technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Power-loss recovery, automatic filament relay and filament tangle detection (tangle detection only with the CFS fitted)[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | CFS compatible - RFID filament identification and multi-filament printing with the Creality Filament System[1] | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[2][4] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[2][4][5] |
| Electronics & Power | ||
| Total rated power draw | Rated power 900 W; input 100-240 V AC 50/60 Hz[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.8-inch colour touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; input shaping and a lighting kit are listed as standard[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB drive, Wi-Fi and Creality Cloud file transfer[1] | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[4][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | 1080p camera at 30 fps[4][5] |
| Materials Support | ||
| Officially supported filament list | Hyper-PLA, PLA, PETG, TPU 95A, ABS, ASA, PLA-CF, PA-CF[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Creality US store - Ender-3 V4 Combo 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 KE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor