3D Printing InfoPrinter comparison
Creality Ender-3 V3 vs Sovol SV07
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 comparisonsMore Sovol SV07 comparisons
| Property | Creality Ender-3 V3BEDSLINGER | Sovol SV07BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Creality | Sovol |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3, marketed as a CoreXZ machine[1] | Sovol SV07[2][3] |
| Street price (USD; dated snapshot per entry) | $239.00 on store.creality.com, Aug 2026 (listed as "Ender-3 V3 CoreXZ 3D Printer")[4] | $299 at 3D Printers Online Store but Out of Stock, checked Aug 2026. Sovol's own comparison article quotes $259. No in-stock listing found[3][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Do not confuse with the Ender-3 V3 SE or KE, which are cheaper and slower and use a conventional bed-slinger gantry - only the V3 and V3 Plus use CoreXZ. The V3 Plus is the same idea scaled to 300 x 300 x 330 mm. Creality's own spec table gives the V3 a 110 C bed, where the SE, KE, V4 and K1 series stop at 100 C[1][6][7] | Base of a two-model pair with the SV07 Plus (300x300x350, 600 W MeanWell PSU, 25-point levelling, adds USB Type-C). The SV07 has a 350 W MeanWell PSU. Both are quoted by Sovol at 500 mm/s and 300 °C, so PSU wattage and build volume are the reliable discriminators[5][3][8] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; not present in the current 3D-printer collection. 3DJake shows it sold out and no longer stocked[9][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[1] | 220 x 220 x 250 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 358 x 374 x 498 mm[1] | 460 x 457 x 625 mm[3] |
| Net weight (kg) | 7.83 kg net (Creality); Tom's Hardware rounds it to 7.8 kg[1][10] | 9.8 kg machine weight; 12.9 kg boxed[3] |
| Frame construction & material | Not documented | Open frame, supplied as an assembly kit[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame; 3DJake records "Heated chamber: No"[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXZ kinematics - the X and Z axes are coupled and driven together, with the bed still moving in Y[1] | Cartesian i3 bedslinger[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim; Creality Lab states the typical speed is 300 mm/s)[1][6] | Conflicting manufacturer figures: Sovol's own comparison says up to 500 mm/s, 3DJake's feature text says up to 250 mm/s, and the retailer listing gives a 250-500 mm/s range. 500 is the headline claim, 250 the working figure[5][2][3] |
| Recommended/typical print speed | 300 mm/s typical printing speed (Creality Lab figure quoted on the sibling V3 Plus page for the same CoreXZ platform)[6] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | New high-speed direct-drive extruder[1] | All-metal dual-gear direct drive with a planetary gearbox[2][5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-swap nozzle with a hardened steel tip integrated with the heatbreak (Creality's "unicorn" nozzle), replaced as a unit[1][10] | All-metal hotend to 300 °C[2][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | <=300 °C claimed[2][3][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heatbed temperature - higher than the rest of the Ender-3 V3 family[1] | <=100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | PEI flexible build plate, removable spring steel[1] | Reversible PEI build plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling with automatic Z offset (Creality states auto levelling; Tom's Hardware records "Automatic + Z")[1][10] | Automatic bed levelling over 25 points; probe technology not stated[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Triple-fan cooling (Sovol's description; fan sizes and duct design not published)[2][5] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit mainboard (Creality does not name the board or MCU)[1] | Not documented |
| PSU (brand, wattage, rail voltage) | Not documented | 350 W MeanWell, 24 V, 115/230 V AC input[5][3] |
| Total rated power draw | Rated power 350 W; input 100-120 V / 200-240 V, 50/60 Hz[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality Print slicing ecosystem; input shaping with an included G-sensor accelerometer. Creality does not name the firmware base on the V3 page (the sibling KE page states Creality OS is Klipper-based)[1][11] | Klipper[2][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch HD colour touchscreen[1] | 5-inch touchscreen (Sovol markets it as a "5-inch HD Klipper screen")[2][5] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; power-loss recovery; file transfer from USB drive, WLAN or Creality Cloud[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi; USB drive, WLAN and Creality Cloud file transfer[1] | Wi-Fi and USB Type-C[2][5][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | AI camera optional, not fitted as standard[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, PLA-CF, PETG-CF and Creality CR-carbon[1] | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[3][5] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[12] | Not documented |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 14 minutes 54 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[10] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Sovol SV07 technical data table 3djake.com · 2026-08 · vendor
- Sovol SV07 Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 CoreXZ 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor