3D Printing InfoPrinter comparison
Creality Ender-3 V3 SE vs UltiMaker Factor 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 SE comparisonsMore UltiMaker Factor 4 comparisons
| Property | Creality Ender-3 V3 SEBEDSLINGER | UltiMaker Factor 4INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Creality | UltiMaker |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3 SE[1] | UltiMaker Factor 4[2] |
| Release date (announcement and actual shipping) | Not documented | Announced 22 April 2024, shown at HANNOVER MESSE 2024 (22-26 April) and TCT Asia (7-9 May 2024)[2] |
| Launch MSRP (USD) | Not documented | Starting at approximately $20,000[2] |
| Street price (USD; dated snapshot per entry) | $186.00 on store.creality.com, Aug 2026; Creality's own product page shows $199.00 for the same machine on the same day, so the two Creality properties disagree[3][1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The cheapest of the Ender-3 V3 family and mechanically the most conservative: it keeps a conventional i3 bed-slinger layout, while the Ender-3 V3 and V3 Plus use CoreXZ and the V3 KE keeps the bed-slinger layout but adds an X-axis linear rail, a 60 W ceramic hotend and Klipper-based Creality OS. Speed ceilings differ sharply - 250 mm/s and 2500 mm/s2 on the SE against 500 mm/s on the KE and 600 mm/s on the V3/V3 Plus. The SE also stops at a 260 C nozzle where the others reach 300 C[1][4][5][6][7] | Shares the 330 x 240 x 300 mm envelope with the UltiMaker S5, S7 and S8, which is the single most contaminated figure in UltiMaker's range. What separates the Factor 4 is the actively controlled 70 °C build volume, the climate-controlled 6-spool material station holding humidity below 15%, and HEPA filtration. UltiMaker also sells a Factor 4 Plus[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[6] | 330 x 240 x 300 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 349 x 364 x 490 mm (Tom's Hardware measurement of the machine footprint)[6] | Not documented |
| Net weight (kg) | 7.12 kg[6] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed with actively controlled chamber airflow and a HEPA filter[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Build volume temperature controlled up to 70 °C with actively controlled chamber airflow (manufacturer specification)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger - Creality describes "neat X, Y, Z-axis, smooth T-shaped profiles" with a rigid dual Z-axis and a moving build platform on the Y axis[1] | Direct-drive dual extrusion; kinematic layout not stated in the source checked[2] |
| Y-axis guide type | Y axis runs on a pair of 8 mm steel linear shafts carrying the build platform[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Rigid dual Z-axis, which Creality says reduces Z wobble[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s max printing speed (manufacturer claim, Creality Lab figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 2500 mm/s2 max acceleration (manufacturer claim). Tom's Hardware attributes the modest Benchy time directly to this acceleration cap[1][6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Creality "Sprite" direct-drive extruder, which Creality says works with PLA, PETG and flexible TPU and had shipped over 500,000 units as of June 2023[1] | Direct-drive dual extrusion[2] |
| Filament diameter | Not documented | 2.85 mm[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Direct-drive hotend with a 0.4 mm high-flow nozzle (Tom's Hardware description); Creality does not describe an all-metal path for the SE[6] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C maximum nozzle temperature per Tom's Hardware's spec box - the lowest of the Ender-3 V3 family, where the V3, V3 Plus and KE all reach 300 C[6][5] | 340 °C maximum with the high-temperature print core (manufacturer claim)[2] |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | PC-coated spring steel sheet, heated, removable[6] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | CR Touch inductive/mechanical probe for auto bed levelling plus a separate strain sensor for automatic Z offset - Creality's pitch is no levelling screws and no paper method[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[6] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Automatic climate-controlled material handling and storage station holding humidity below 15%, storing up to six spools[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two fans on the printhead: a front-mounted fan onto the hotend heatsink and a second fan in the shroud with twin ducts aimed at the nozzle (Tom's Hardware teardown description)[6] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | HEPA filter[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality publishes an open-source firmware repository for this model, CrealityOfficial/Ender-3V3-SE on GitHub under GPL-3.0 (last pushed July 2024). Unlike the KE, K1 and K2 repositories, it is not described as a Klipper clone, and Creality does not call the SE a Creality OS machine on its product page[8][9][4] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.2-inch colour screen with a control knob - not a touchscreen, unlike the KE and V3[6] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Knob-driven colour UI using motion graphics to show levelling progress and print parameters; auto filament load/unload from the menu[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | SD card only - no Wi-Fi and no USB host, in contrast to the Wi-Fi-equipped KE and V3[6] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Kit-style assembly from a small number of pre-built sections; Creality claims printing within 20 minutes of unboxing[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG and TPU (Tom's Hardware); Creality's own copy names PLA, PETG and flexible TPU for the Sprite extruder[6] | UltiMaker-branded PPS CF, PLA, Tough PLA, Nylon, PETG, PET CF and PVA, plus validated third-party materials from BASF Forward AM, Kimya, Polymaker, LEHVOSS and Jabil[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy within +/-0.2 mm or +/-0.2% of feature nominal length; UltiMaker states it tested over 95% print-completion success. Manufacturer figures, not independent measurements[2] |
| Benchmark print times (source + settings) | Benchy in 41 minutes under Speed Boat Rules (2 walls, 3 top/bottom layers, 10% grid infill, 0.25 mm layer height, 0.5 mm width) in ordinary grey PLA - independently measured by Tom's Hardware, not a manufacturer figure[6] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[6] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 SE product page creality.com · 2026-08 · vendor
- UltiMaker Factor 4: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- Creality US store - Ender-3 V3 SE 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 SE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Tom's Hardware - Creality Ender 3 V3 KE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/Ender-3V3-SE repository metadata ("Open source for Ender-3V3 SE", GPL-3.0) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor