3D Printing InfoPrinter comparison
Creality Ender-3 V3 SE vs QIDI Max4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 SE comparisonsMore QIDI Max4 comparisons
| Property | Creality Ender-3 V3 SEBEDSLINGER | QIDI Max4COREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3 SE[1] | QIDI Max4, sold as "Max4 High-Temp 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Not published on QIDI's product page; the machine is listed as the current replacement for the discontinued X-Max 3 (checked Aug 2026)[2][4] |
| Street price (USD; dated snapshot per entry) | $186.00 on store.creality.com, Aug 2026; Creality's own product page shows $199.00 for the same machine on the same day, so the two Creality properties disagree[5][1] | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The cheapest of the Ender-3 V3 family and mechanically the most conservative: it keeps a conventional i3 bed-slinger layout, while the Ender-3 V3 and V3 Plus use CoreXZ and the V3 KE keeps the bed-slinger layout but adds an X-axis linear rail, a 60 W ceramic hotend and Klipper-based Creality OS. Speed ceilings differ sharply - 250 mm/s and 2500 mm/s2 on the SE against 500 mm/s on the KE and 600 mm/s on the V3/V3 Plus. The SE also stops at a 260 C nozzle where the others reach 300 C[1][6][7][8][9] | Four variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), Combo + Polar Cooler. Direct replacement for the X-Max 3, which it differs from on every headline figure: 390x390x340 vs 325x325x315, 800 vs 600 mm/s, 370 vs 350 °C. Do not carry X-Max 3 specs across[2][4] |
| Market position: superseded? successor announced? | Not documented | Current large-format flagship as of Aug 2026; QIDI's X-Max 3 page directs buyers here[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[8] | 390 x 390 x 340 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 349 x 364 x 490 mm (Tom's Hardware measurement of the machine footprint)[8] | 558 x 578 x 612 mm[3] |
| Net weight (kg) | 7.12 kg[8] | 46.5 kg net[3] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with a 3-in-1 air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent active chamber heating (manufacturer claim), with a 4-pin PWM chamber fan with RPM feedback[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger - Creality describes "neat X, Y, Z-axis, smooth T-shaped profiles" with a rigid dual Z-axis and a moving build platform on the Y axis[1] | CoreXY[3] |
| Y-axis guide type | Y axis runs on a pair of 8 mm steel linear shafts carrying the build platform[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Rigid dual Z-axis, which Creality says reduces Z wobble[1] | 2 mm lead Z screw with an anti-backlash nut[2] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | FOC closed-loop stepper motors[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s max printing speed (manufacturer claim, Creality Lab figure)[1] | 800 mm/s (manufacturer claim, maximum)[3] |
| Max acceleration (claimed, mm/s²) | 2500 mm/s2 max acceleration (manufacturer claim). Tom's Hardware attributes the modest Benchy time directly to this acceleration cap[1][8] | 30,000 mm/s2 (manufacturer claim, maximum)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | 40 mm3/s rated flow (manufacturer claim)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaper listed as a feature[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Creality "Sprite" direct-drive extruder, which Creality says works with PLA, PETG and flexible TPU and had shipped over 500,000 units as of June 2023[1] | Direct drive, dual hardened-steel gears, 8.9:1 reduction[3] |
| Gear ratio & drive gear material | Not documented | 8.9:1; drive gears hardened steel[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Direct-drive hotend with a 0.4 mm high-flow nozzle (Tom's Hardware description); Creality does not describe an all-metal path for the SE[8] | Multi-metal hotend with a ceramic heater and a 0.4 mm bimetal nozzle; ceramic throat[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C maximum nozzle temperature per Tom's Hardware's spec box - the lowest of the Ender-3 V3 family, where the V3, V3 Plus and KE all reach 300 C[8][7] | <=370 °C claimed[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed on a 390 x 390 mm bed QIDI markets as ultra-uniform (no thermal imaging published)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | PC-coated spring steel sheet, heated, removable[8] | Aluminium plate with silicone heater; double-sided magnetic PEI build plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | CR Touch inductive/mechanical probe for auto bed levelling plus a separate strain sensor for automatic Z offset - Creality's pitch is no levelling screws and no paper method[1] | Automatic levelling; probe technology not named by QIDI[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[8] | Filament run-out sensor and filament tangle detection (tangle mechanism not described), plus a filament cutter[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | QIDI Box multi-colour unit supported; sold bundled as the Max4 Combo[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two fans on the printhead: a front-mounted fan onto the hotend heatsink and a second fan in the shroud with twin ducts aimed at the nozzle (Tom's Hardware teardown description)[8] | Toolhead, model and auxiliary fans are all 4-pin PWM with RPM feedback; mainboard and chamber fans are closed-loop, chamber fan high-power turbo[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon[3] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 110 V / 220-240 V AC, 50/60 Hz[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality publishes an open-source firmware repository for this model, CrealityOfficial/Ender-3V3-SE on GitHub under GPL-3.0 (last pushed July 2024). Unlike the KE, K1 and K2 repositories, it is not described as a Klipper clone, and Creality does not call the SE a Creality OS machine on its product page[10][11][6] | Not stated on the product page; QIDI Studio, PrusaSlicer and Orca are the supported slicers[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.2-inch colour screen with a control knob - not a touchscreen, unlike the KE and V3[8] | 5-inch touchscreen, 480 x 800[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Knob-driven colour UI using motion graphics to show levelling progress and print parameters; auto filament load/unload from the menu[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | SD card only - no Wi-Fi and no USB host, in contrast to the Wi-Fi-equipped KE and V3[8] | Wi-Fi, LAN, USB[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | AI camera with print-failure detection[2][3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Kit-style assembly from a small number of pre-built sections; Creality claims printing within 20 minutes of unboxing[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG and TPU (Tom's Hardware); Creality's own copy names PLA, PETG and flexible TPU for the Sprite extruder[8] | PLA, ABS, ASA, PETG, TPU, PA, PC, and glass- and carbon-fibre-filled polymers[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[12] | 1-year coverage, lifetime tech guidance, 14-day no-reason return[2] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 41 minutes under Speed Boat Rules (2 walls, 3 top/bottom layers, 10% grid infill, 0.25 mm layer height, 0.5 mm width) in ordinary grey PLA - independently measured by Tom's Hardware, not a manufacturer figure[8] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 SE product page creality.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Max4 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 SE 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 SE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Tom's Hardware - Creality Ender 3 V3 KE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/Ender-3V3-SE repository metadata ("Open source for Ender-3V3 SE", GPL-3.0) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor