3D Printing InfoPrinter comparison
Creality Ender-3 V3 SE vs FlashForge Creator 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 SE comparisonsMore FlashForge Creator 4 comparisons
| Property | Creality Ender-3 V3 SEBEDSLINGER | FlashForge Creator 4IDEX |
|---|---|---|
| Identity | ||
| Brand | Creality | FlashForge |
| Class | BEDSLINGER | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3 SE[1] | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[2] |
| Street price (USD; dated snapshot per entry) | $186.00 on store.creality.com, Aug 2026; Creality's own product page shows $199.00 for the same machine on the same day, so the two Creality properties disagree[3][1] | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The cheapest of the Ender-3 V3 family and mechanically the most conservative: it keeps a conventional i3 bed-slinger layout, while the Ender-3 V3 and V3 Plus use CoreXZ and the V3 KE keeps the bed-slinger layout but adds an X-axis linear rail, a 60 W ceramic hotend and Klipper-based Creality OS. Speed ceilings differ sharply - 250 mm/s and 2500 mm/s2 on the SE against 500 mm/s on the KE and 600 mm/s on the V3/V3 Plus. The SE also stops at a 260 C nozzle where the others reach 300 C[1][4][5][6][7] | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[6] | 400 x 350 x 500 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 349 x 364 x 490 mm (Tom's Hardware measurement of the machine footprint)[6] | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[2] |
| Net weight (kg) | 7.12 kg[6] | 90 kg net[2] |
| Frame construction & material | Not documented | Fully enclosed professional chassis on a stand[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively controlled (manufacturer claim)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger - Creality describes "neat X, Y, Z-axis, smooth T-shaped profiles" with a rigid dual Z-axis and a moving build platform on the Y axis[1] | IDEX — two independently driven extruders on the same gantry[2] |
| Y-axis guide type | Y axis runs on a pair of 8 mm steel linear shafts carrying the build platform[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Rigid dual Z-axis, which Creality says reduces Z wobble[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s max printing speed (manufacturer claim, Creality Lab figure)[1] | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[2] |
| Max acceleration (claimed, mm/s²) | 2500 mm/s2 max acceleration (manufacturer claim). Tom's Hardware attributes the modest Benchy time directly to this acceleration cap[1][6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Creality "Sprite" direct-drive extruder, which Creality says works with PLA, PETG and flexible TPU and had shipped over 500,000 units as of June 2023[1] | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Direct-drive hotend with a 0.4 mm high-flow nozzle (Tom's Hardware description); Creality does not describe an all-metal path for the SE[6] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C maximum nozzle temperature per Tom's Hardware's spec box - the lowest of the Ender-3 V3 family, where the V3, V3 Plus and KE all reach 300 C[6][5] | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 130 °C maximum (manufacturer claim)[2] |
| Bed surface (material, texture, coating), single/double-sided | PC-coated spring steel sheet, heated, removable[6] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | CR Touch inductive/mechanical probe for auto bed levelling plus a separate strain sensor for automatic Z offset - Creality's pitch is no levelling screws and no paper method[1] | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[6] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Two spool bays, 1 kg and 2 kg capacity[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two fans on the printhead: a front-mounted fan onto the hotend heatsink and a second fan in the shroud with twin ducts aimed at the nozzle (Tom's Hardware teardown description)[6] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[2] |
| Total rated power draw | Not documented | 2320 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality publishes an open-source firmware repository for this model, CrealityOfficial/Ender-3V3-SE on GitHub under GPL-3.0 (last pushed July 2024). Unlike the KE, K1 and K2 repositories, it is not described as a Klipper clone, and Creality does not call the SE a Creality OS machine on its product page[8][9][4] | Not named; the supported slicer is FlashPrint[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.2-inch colour screen with a control knob - not a touchscreen, unlike the KE and V3[6] | 7-inch touchscreen, 1024 x 600[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Knob-driven colour UI using motion graphics to show levelling progress and print parameters; auto filament load/unload from the menu[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | SD card only - no Wi-Fi and no USB host, in contrast to the Wi-Fi-equipped KE and V3[6] | USB flash drive, Ethernet, Wi-Fi[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Kit-style assembly from a small number of pre-built sections; Creality claims printing within 20 minutes of unboxing[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG and TPU (Tom's Hardware); Creality's own copy names PLA, PETG and flexible TPU for the Sprite extruder[6] | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | 12 months on the printer, 3 months on extruder parts[2] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 41 minutes under Speed Boat Rules (2 walls, 3 top/bottom layers, 10% grid infill, 0.25 mm layer height, 0.5 mm width) in ordinary grey PLA - independently measured by Tom's Hardware, not a manufacturer figure[6] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[6] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 SE product page creality.com · 2026-08 · vendor
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 SE 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 SE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Tom's Hardware - Creality Ender 3 V3 KE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/Ender-3V3-SE repository metadata ("Open source for Ender-3V3 SE", GPL-3.0) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor