3D Printing InfoPrinter comparison
Creality Ender-3 V3 KE vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 KE comparisonsMore Snapmaker Artisan comparisons
| Property | Creality Ender-3 V3 KEBEDSLINGER | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | Creality | Snapmaker |
| Class | BEDSLINGER | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3 KE[1] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[2] |
| Street price (USD; dated snapshot per entry) | $259.00 on store.creality.com, Aug 2026; Creality's own product page shows $279.00 on the same day[3][1] | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sits between the SE and the V3 in the Ender-3 V3 family. Against the SE: linear rail on X instead of wheels, 500 mm/s instead of 250, 300 C ceramic hotend instead of 260 C, 4.3-inch touchscreen instead of a 3.2-inch knob screen, Wi-Fi instead of SD-card only. Against the V3: the KE keeps the conventional bed-slinger layout while the V3 is CoreXZ and reaches 600 mm/s. Build volume also differs subtly - 220 x 220 x 240 mm on the KE against 220 x 220 x 250 mm on the SE and V3[1][4][5][6] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 240 mm - 10 mm shorter than the SE and V3, a difference that is easy to miss[4] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 433 x 366 x 490 mm (Tom's Hardware)[4] | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[2] |
| Net weight (kg) | 7.8 kg[4] | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a linear rail on X[1] | IDEX — two independently driven print heads[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Steel linear rail on the X axis with a ball-bearing carriage; Creality Lab quotes a 0.04 friction coefficient[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Z-axis lead 8 mm; X and Y leads 40 mm[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim, Creality Lab)[1] | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder paired with the ceramic-heated high-flow hotend[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hotend with a 60 W ceramic heater, a bi-metal copper/titanium-alloy heatbreak to resist thermal creep, and a copper nozzle[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature (Creality Lab test at 25 C room temperature)[1] | 300 °C maximum (manufacturer claim)[2] |
| Heater cartridge power (W) | 60 W ceramic heater cartridge (manufacturer figure)[1] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated spring steel sheet, heated, removable[4] | Dual-sided textured PEI sheet[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | One-tap self-test covering Z offset and auto levelling; Tom's Hardware records automatic levelling with automatic Z as well[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[4] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two part-cooling fans, one on each side of the printhead, cooling the freshly printed section from both sides[1] | Not documented |
| Electronics & Power | ||
| Total rated power draw | Not documented | Integrated controller rated 300 W + 450 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, which Creality states is "Based on the popular Klipper firmware", with open-source files published; the source is on GitHub as CrealityOfficial/Ender-3_V3_KE_Klipper, described as a clone of upstream Klipper, GPL-3.0. Input shaping and motion advance (pressure advance) are exposed as features[1][7][8] | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[4] | 7-inch touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with a tab bar, real-time model preview, motion graphics for print parameters and a one-tap self-test[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB; LAN printing and cloud printing through Creality Print on PC or the Creality Cloud app, with multi-printer print-farm management[4][1] | Wi-Fi, USB cable, USB flash drive[2] |
| Materials Support | ||
| Officially supported filament list | Hyper PLA, PLA, PETG, ABS, TPU (95A) and ASA[1] | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality states the Ender-3 V3 KE runs a Klipper-based Creality OS and publishes CrealityOfficial/Ender-3_V3_KE_Klipper (GPL-3.0) as a clone of upstream Klipper, which ships the verify_heater thermal-runaway check; the stock configuration was not checked here[7][8][1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[9] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[2] |
| Benchmark print times (source + settings) | Benchy in 19 minutes 48 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[4] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[4] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 KE 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 KE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Tom's Hardware - Creality Ender 3 V3 SE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/Ender-3_V3_KE_Klipper repository metadata ("clone from https://github.com/Klipper3d/klipper/", GPL-3.0) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor