3D Printing InfoPrinter comparison
Creality Ender-3 V3 KE vs QIDI Q1 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 KE comparisonsMore QIDI Q1 Pro comparisons
| Property | Creality Ender-3 V3 KEBEDSLINGER | QIDI Q1 ProCOREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3 KE[1] | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[2] |
| Release date (announcement and actual shipping) | Not documented | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $259.00 on store.creality.com, Aug 2026; Creality's own product page shows $279.00 on the same day[4][1] | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sits between the SE and the V3 in the Ender-3 V3 family. Against the SE: linear rail on X instead of wheels, 500 mm/s instead of 250, 300 C ceramic hotend instead of 260 C, 4.3-inch touchscreen instead of a 3.2-inch knob screen, Wi-Fi instead of SD-card only. Against the V3: the KE keeps the conventional bed-slinger layout while the V3 is CoreXZ and reaches 600 mm/s. Build volume also differs subtly - 220 x 220 x 240 mm on the KE against 220 x 220 x 250 mm on the SE and V3[1][5][6][7] | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[2][3] |
| Market position: superseded? successor announced? | Not documented | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 240 mm - 10 mm shorter than the SE and V3, a difference that is easy to miss[5] | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[2][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 433 x 366 x 490 mm (Tom's Hardware)[5] | 477 x 467 x 489 mm machine dimensions (QIDI)[2][8] |
| Net weight (kg) | 7.8 kg[5] | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[2][8] |
| Frame construction & material | Not documented | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[2][8] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[2][8] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a linear rail on X[1] | CoreXY[8] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Steel linear rail on the X axis with a ball-bearing carriage; Creality Lab quotes a 0.04 friction coefficient[1] | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[8] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Independent dual Z lead-screw motors[8] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim, Creality Lab)[1] | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[2][8] |
| Max acceleration (claimed, mm/s²) | Not documented | <=20,000 mm/s2 (manufacturer claim)[2][8] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder paired with the ceramic-heated high-flow hotend[1] | Direct-drive extruder with hardened steel gears[2][8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hotend with a 60 W ceramic heater, a bi-metal copper/titanium-alloy heatbreak to resist thermal creep, and a copper nozzle[1] | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[2][8] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature (Creality Lab test at 25 C room temperature)[1] | <=350 °C claimed. No firmware max_temp verified for this model[2][8] |
| Heater cartridge power (W) | 60 W ceramic heater cartridge (manufacturer figure)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed. No firmware limit verified for this model[2][8] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated spring steel sheet, heated, removable[5] | Double-sided textured PEI plate on an aluminium substrate bed[2][8] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | One-tap self-test covering Z offset and auto levelling; Tom's Hardware records automatic levelling with automatic Z as well[1] | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[5] | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[8] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two part-cooling fans, one on each side of the printhead, cooling the freshly printed section from both sides[1] | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[8] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[8] |
| Total rated power draw | Not documented | 350 W plus 300 W for chamber heating (rated)[2][8] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, which Creality states is "Based on the popular Klipper firmware", with open-source files published; the source is on GitHub as CrealityOfficial/Ender-3_V3_KE_Klipper, described as a clone of upstream Klipper, GPL-3.0. Input shaping and motion advance (pressure advance) are exposed as features[1][9][10] | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[5] | 4.3-inch touchscreen, 272 x 480[2][8] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with a tab bar, real-time model preview, motion graphics for print parameters and a one-tap self-test[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB; LAN printing and cloud printing through Creality Print on PC or the Creality Cloud app, with multi-printer print-farm management[5][1] | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[2][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera, up to 1080p, timelapse supported. Framerate not published[2][8] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Ships fully assembled[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed as a feature; mechanism not published[8] |
| Materials Support | ||
| Officially supported filament list | Hyper PLA, PLA, PETG, ABS, TPU (95A) and ASA[1] | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality states the Ender-3 V3 KE runs a Klipper-based Creality OS and publishes CrealityOfficial/Ender-3_V3_KE_Klipper (GPL-3.0) as a clone of upstream Klipper, which ships the verify_heater thermal-runaway check; the stock configuration was not checked here[9][10][1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[11] | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[12] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 19 minutes 48 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[5] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 KE 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 KE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Tom's Hardware - Creality Ender 3 V3 SE Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/Ender-3_V3_KE_Klipper repository metadata ("clone from https://github.com/Klipper3d/klipper/", GPL-3.0) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor