3D Printing InfoPrinter comparison
Bambu Lab X1E vs INTAMSYS FUNMAT HT Enhanced
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab X1E comparisonsMore INTAMSYS FUNMAT HT Enhanced comparisons
| Property | Bambu Lab X1ECOREXY | INTAMSYS FUNMAT HT EnhancedINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | INTAMSYS |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab X1E; spec PDF header "Bambu Lab X1E Technical Specification"[1] | Intamsys Funmat HT Enhanced, product number M-QRS-2X8E[2] |
| Street price (USD; dated snapshot per entry) | Not documented | $6,995.00 at Top 3D Shop, reduced from $8,995.00, in stock, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enterprise variant of the X1-Carbon, not a trim level. Differences from the X1C, from the two manufacturer spec sheets side by side: active chamber heating to 60 C (X1C has none), 320 C vs 300 C hot end, Smooth PEI plate included vs Cool/Engineering plates, G3+H12+carbon filter stack vs carbon filter only, Ethernet with a network kill switch, removable network module and 802.1X vs Wi-Fi only, 16 kg vs 14.13 kg, and 1400 W at 220 V / 750 W at 110 V vs 1000 W / 350 W[1][3] | Two extruder configurations with very different ceilings: standard up to 300 °C, high-temperature up to 450 °C. A quoted "450 °C" applies only to the HT extruder. Larger siblings Funmat Pro 410 (305x305x406, 500 °C, dual nozzle) and Funmat Pro 610HT (610x508x508, 300 °C chamber) are separate machines[2][4][5] |
| Market position: superseded? successor announced? | Not present in the Bambu Lab US store 3D-printer collection in Aug 2026, which lists A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D and H2C. Bambu sells business machines through a separate Business & Institution channel, so absence from the consumer collection is not proof of discontinuation; no live first-party price could be recorded[6] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm (manufacturer figure)[1] | 260 x 260 x 260 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 389 x 389 x 457 mm - identical to the X1-Carbon[1] | 530 x 500 x 530 mm[2] |
| Net weight (kg) | 16 kg net (against 14.13 kg for the X1-Carbon)[1][3] | 167 lb (approximately 76 kg)[2] |
| Frame construction & material | Steel chassis with an aluminium and glass shell[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor, and the only X1 with active chamber heating; the chamber is controlled to a maximum of 60 C[1] | Heated, enclosed build chamber with an in-chamber camera[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Actively heated chamber, maximum controlled temperature 60 C (manufacturer figure; not a passive measurement)[1] | 90 °C heated chamber (manufacturer specification for an actively heated chamber)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY, two stepper motors with one belt each (X1 series motion system)[7] | Not documented |
| X-axis guide type (rods / linear rails / V-wheels; size) | Carbon X rail as on the X1-Carbon (X1 series toolhead and gantry)[8] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews belt-driven from a single stepper motor, whole bed moving in Z (X1 series)[7] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 30-300 mm/s print speed range (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 32 mm3/s claimed on a 150x150 mm single-wall model in Bambu ABS at 280 C[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel extruder gears[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend with a hardened-steel nozzle; 0.4 mm included, 0.2/0.6/0.8 mm optional; built-in filament cutter[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 320 C claimed max hot-end temperature - 20 C above the X1-Carbon[1][3] | Standard extruder up to 300 °C; high-temperature extruder up to 450 °C[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C at 220 V, 120 C at 110 V max build-plate temperature[1] | 160 °C platform temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate, Smooth PEI plate included; High Temperature, Textured PEI and Cool plates optional[1] | Aluminium plate with high-borosilicate glass[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing on the three ceramic heatbed force sensors, plus the Bambu micro-lidar for first-layer inspection[1][9] | Automatic bed levelling; probe technology not stated[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor and door sensor; odometry with AMS[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hot-end fan, control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan, all closed-loop controlled[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | G3 pre-filter, H12 HEPA filter and granulated coconut-shell activated-carbon filter; VOC filtration rated Optimal and particulate filtration present[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Motion controller dual-core Cortex-M4; application processor quad ARM A7 at 1.2 GHz with a 2 TOPS NPU; 4 GB eMMC[1] | Not documented |
| Total rated power draw | 100-240 VAC 50/60 Hz; 1400 W at 220 V, 750 W at 110 V[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[10] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 1280x720 touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus app and PC application[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (802.11 b/g/n) plus 100 Mbps full-duplex RJ45 Ethernet, a network kill switch covering both Wi-Fi and Ethernet, a removable network module and 802.1X network access control - the feature set that distinguishes the X1E from every other Bambu machine. 4 GB eMMC and a microSD card reader[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in 1920x1080 chamber monitoring camera; micro-lidar also fitted[1] | In-chamber camera[2] |
| Materials Support | ||
| Officially supported filament list | Optimal: PLA, PETG, TPU, PVA, BVOH. Superior: ABS, ASA, PC, PA, PET and carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA. Ideal: PPA-CF/GF, PPS, PPS-CF/GF[1] | PEEK, PEI, PEKK, PPSU, PA/CF, PC, PC alloys, PA, ABS, carbon-fibre-filled, metal-filled, fibreglass-filled, ASA, PETG, ESD-safe, HIPS, TPU, PLA, PVA[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Firmware over-temperature protection is documented for the X1 series: HMS_0300-0200-0001-0003 fires when the heater runs at full power without reaching target in time. Thresholds are not published and the firmware is closed-source[11] | Not documented |
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | FCC and CE[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[12] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Position accuracy X/Y 12.5 um, Z 1.25 um (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab X1E Technical Specification (PDF) cdn1.bambulab.com · 2026-08 · doc
- Intamsys Funmat HT Enhanced product listing top3dshop.com · 2026-08 · vendor
- Bambu Lab X1-Carbon - Technical Specifications (PDF) public-cdn.bambulab.com · 2026-08 · doc
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - X1 introduction wiki.bambulab.com · 2026-08 · doc
- PRNewswire - Bambu Lab Launches X1 Series, 23 May 2022 (Kickstarter dates and MSRP table) prnewswire.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Wiki - HMS_0300-0200-0001-0003: nozzle heater over-temperature (X1 series) wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor