3D Printing InfoPrinter comparison
Bambu Lab P1S vs FlashForge Creator 5 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab P1S comparisonsMore FlashForge Creator 5 Pro comparisons
| Property | Bambu Lab P1SCOREXY | FlashForge Creator 5 ProTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | FlashForge |
| Class | COREXY | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab P1S. Store title: "Bambu Lab P1S 3D Printer"[1] | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[4][5] |
| Launch MSRP (USD) | Not documented | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[4][5] |
| Street price (USD; dated snapshot per entry) | From $369.00 (base P1S) on the Bambu Lab US store, Aug 2026, against a stated typical price of $399.00; with the P1S AMS 2 Pro Combo variant selected the same page shows $539.00 against a typical $579.00[6][1] | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the P1P and mechanically the same motion platform. Three SKUs on one product page: P1S, P1S AMS Combo and P1S AMS 2 Pro Combo (the AMS 2 Pro adds active filament drying). Sibling figures that get mixed up: net weight 12.95 kg (P1S) vs 9.65 kg (P1P); depth 389 mm vs 386 mm; ABS/ASA Ideal (P1S) vs Capable (P1P). Also distinct from the 2026 P2S, which is a different machine (600 mm/s, 110 C bed, 5-inch touchscreen, 14.9 kg)[1][7] | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[2][4][5] |
| Market position: superseded? successor announced? | Still sold in Aug 2026, but Bambu now markets the P2S as "The Classic Evolves" above it in the same enclosed-CoreXY slot[6][8] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm advertised. Bambu's own footnote sets the default printable height in Bambu Studio to 250 mm to prevent heatbed collisions, and notes the collapsible filament-cutter stopper occupies part of the print area when popped out[1] | 256 x 256 x 256 mm[4][5][9] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 389 x 389 x 458 mm; package 485 x 480 x 530 mm[1] | Not documented |
| Net weight (kg) | 12.95 kg net, 17.60 kg gross; the AMS Combo ships at 21.60 kg gross and the AMS 2 Pro Combo at 21 kg gross[1] | Not documented |
| Frame construction & material | Steel chassis (shared with the P1P) inside plastic and glass panels[1] | Rigid frame with a fully sealed enclosure; no dimensions or weight published[2][5] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed - plastic and glass panels with a glass front door and lid, plus an activated-carbon air filter. No active chamber heater; the chamber temperature regulator fan is closed-loop controlled[1] | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[2][4][5] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[2][4][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY driven by two stepper motors, each with an independent belt to the printhead; the P1P and P1S share the same motion system[10] | CoreXY with four independent FlashSwap toolheads[4][5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews belt-driven from a single stepper motor, whole bed moving in Z; manual tramming by three knobs under the bed, no motorised Z-tilt[10] | Not documented |
| Belts (type, width, e.g. Gates?) | Rear adjustable belt tensioners with a Belt Tension Monitor[10] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s maximum (manufacturer claim)[2][4][5] |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 30,000 mm/s2 maximum (manufacturer claim)[4][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive; the service part is the "Stainless Steel Extruder Unit (P1 series)"[10] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal all-in-one hotend with the nozzle integrated into the heatblock, replaced as a unit; 0.4 mm stainless-steel nozzle included, 0.2/0.6/0.8 mm optional[1][10] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel nozzles as standard[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max build-plate temperature[1] | 120 °C maximum (manufacturer claim)[5] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing using three ceramic force (piezo) sensors mounted under the heatbed - Z homing is done by detecting the force of the nozzle contacting the bed[11][10] | Fully automatic calibration and levelling; probe technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - filament run-out sensor[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | AMS-compatible; sold as P1S AMS Combo and P1S AMS 2 Pro Combo, up to 16 colours with four AMS units[1] | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[2][4] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan plus auxiliary part-cooling fan, control-board fan and chamber temperature regulator fan, all closed-loop controlled (all four are merely Optional on the P1P)[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Chamber temperature regulator fan with an activated-carbon air filter[1] | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[2][4][5] |
| Electronics & Power | ||
| Total rated power draw | 100-240 VAC 50/60 Hz; 1000 W at 220 V, 350 W at 110 V[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[12] | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.7-inch 192x64 monochrome screen, not a touchscreen; control by button, app or PC application (P1 series)[10] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Button-driven monochrome on-device UI; job setup happens in Bambu Studio or Bambu Handy[10] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Bluetooth and Bambu-Bus, microSD card storage, 5 V/1.5 A USB output power (P1 series)[10] | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[4][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported[1] | 1080p camera at 30 fps[4][5] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA. Capable: PA, PC[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[13] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab P2S Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab P2S store page us.store.bambulab.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor