3D Printing InfoPrinter comparison
Bambu Lab P1S vs Creality Ender-3 V3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab P1S comparisonsMore Creality Ender-3 V3 comparisons
| Property | Bambu Lab P1SCOREXY | Creality Ender-3 V3BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Creality |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab P1S. Store title: "Bambu Lab P1S 3D Printer"[1] | Creality Ender-3 V3, marketed as a CoreXZ machine[2] |
| Street price (USD; dated snapshot per entry) | From $369.00 (base P1S) on the Bambu Lab US store, Aug 2026, against a stated typical price of $399.00; with the P1S AMS 2 Pro Combo variant selected the same page shows $539.00 against a typical $579.00[3][1] | $239.00 on store.creality.com, Aug 2026 (listed as "Ender-3 V3 CoreXZ 3D Printer")[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the P1P and mechanically the same motion platform. Three SKUs on one product page: P1S, P1S AMS Combo and P1S AMS 2 Pro Combo (the AMS 2 Pro adds active filament drying). Sibling figures that get mixed up: net weight 12.95 kg (P1S) vs 9.65 kg (P1P); depth 389 mm vs 386 mm; ABS/ASA Ideal (P1S) vs Capable (P1P). Also distinct from the 2026 P2S, which is a different machine (600 mm/s, 110 C bed, 5-inch touchscreen, 14.9 kg)[1][5] | Do not confuse with the Ender-3 V3 SE or KE, which are cheaper and slower and use a conventional bed-slinger gantry - only the V3 and V3 Plus use CoreXZ. The V3 Plus is the same idea scaled to 300 x 300 x 330 mm. Creality's own spec table gives the V3 a 110 C bed, where the SE, KE, V4 and K1 series stop at 100 C[2][6][7] |
| Market position: superseded? successor announced? | Still sold in Aug 2026, but Bambu now markets the P2S as "The Classic Evolves" above it in the same enclosed-CoreXY slot[3][8] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm advertised. Bambu's own footnote sets the default printable height in Bambu Studio to 250 mm to prevent heatbed collisions, and notes the collapsible filament-cutter stopper occupies part of the print area when popped out[1] | 220 x 220 x 250 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 389 x 389 x 458 mm; package 485 x 480 x 530 mm[1] | 358 x 374 x 498 mm[2] |
| Net weight (kg) | 12.95 kg net, 17.60 kg gross; the AMS Combo ships at 21.60 kg gross and the AMS 2 Pro Combo at 21 kg gross[1] | 7.83 kg net (Creality); Tom's Hardware rounds it to 7.8 kg[2][9] |
| Frame construction & material | Steel chassis (shared with the P1P) inside plastic and glass panels[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed - plastic and glass panels with a glass front door and lid, plus an activated-carbon air filter. No active chamber heater; the chamber temperature regulator fan is closed-loop controlled[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY driven by two stepper motors, each with an independent belt to the printhead; the P1P and P1S share the same motion system[10] | CoreXZ kinematics - the X and Z axes are coupled and driven together, with the bed still moving in Y[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews belt-driven from a single stepper motor, whole bed moving in Z; manual tramming by three knobs under the bed, no motorised Z-tilt[10] | Not documented |
| Belts (type, width, e.g. Gates?) | Rear adjustable belt tensioners with a Belt Tension Monitor[10] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s max printing speed (manufacturer claim; Creality Lab states the typical speed is 300 mm/s)[2][6] |
| Recommended/typical print speed | Not documented | 300 mm/s typical printing speed (Creality Lab figure quoted on the sibling V3 Plus page for the same CoreXZ platform)[6] |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 20000 mm/s2 max acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive; the service part is the "Stainless Steel Extruder Unit (P1 series)"[10] | New high-speed direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal all-in-one hotend with the nozzle integrated into the heatblock, replaced as a unit; 0.4 mm stainless-steel nozzle included, 0.2/0.6/0.8 mm optional[1][10] | Quick-swap nozzle with a hardened steel tip integrated with the heatbreak (Creality's "unicorn" nozzle), replaced as a unit[2][9] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max build-plate temperature[1] | 110 C max heatbed temperature - higher than the rest of the Ender-3 V3 family[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[1] | PEI flexible build plate, removable spring steel[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing using three ceramic force (piezo) sensors mounted under the heatbed - Z homing is done by detecting the force of the nozzle contacting the bed[11][10] | Auto levelling with automatic Z offset (Creality states auto levelling; Tom's Hardware records "Automatic + Z")[2][9] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - filament run-out sensor[1] | Filament run-out sensor fitted[2] |
| Multi-material/multi-color capability or official upgrade path | AMS-compatible; sold as P1S AMS Combo and P1S AMS 2 Pro Combo, up to 16 colours with four AMS units[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan plus auxiliary part-cooling fan, control-board fan and chamber temperature regulator fan, all closed-loop controlled (all four are merely Optional on the P1P)[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Chamber temperature regulator fan with an activated-carbon air filter[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit mainboard (Creality does not name the board or MCU)[2] |
| Total rated power draw | 100-240 VAC 50/60 Hz; 1000 W at 220 V, 350 W at 110 V[1] | Rated power 350 W; input 100-120 V / 200-240 V, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[12] | Creality Print slicing ecosystem; input shaping with an included G-sensor accelerometer. Creality does not name the firmware base on the V3 page (the sibling KE page states Creality OS is Klipper-based)[2][13] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.7-inch 192x64 monochrome screen, not a touchscreen; control by button, app or PC application (P1 series)[10] | 4.3-inch HD colour touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Button-driven monochrome on-device UI; job setup happens in Bambu Studio or Bambu Handy[10] | Colour touch UI; power-loss recovery; file transfer from USB drive, WLAN or Creality Cloud[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Bluetooth and Bambu-Bus, microSD card storage, 5 V/1.5 A USB output power (P1 series)[10] | Wi-Fi; USB drive, WLAN and Creality Cloud file transfer[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported[1] | AI camera optional, not fitted as standard[2] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA. Capable: PA, PC[1] | PLA, TPU, PETG, ABS, PLA-CF, PETG-CF and Creality CR-carbon[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[14] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[15] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Not documented | Benchy in 14 minutes 54 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[9] |
| Review scores from major outlets (list outlet + score + date) | Not documented | Tom's Hardware rating 4.5 out of 5 in the page's structured data[9] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 CoreXZ 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Bambu Lab P2S Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- Bambu Lab P2S store page us.store.bambulab.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor