3D Printing InfoPrinter comparison
Bambu Lab H2S vs Prusa CORE One L+
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2S comparisonsMore Prusa CORE One L+ comparisons
| Property | Bambu Lab H2SCOREXY | Prusa CORE One L+COREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Prusa Research |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2S; spec sheet header "H2S & H2S Laser Edition Spec Sheet"[1] | Prusa CORE One L+[2] |
| Release date (announcement and actual shipping) | Not documented | The CORE One L+ refresh was announced on 13 August 2026 and went on sale immediately, with the first assembled units shipping at once; it adds GT1.5 belts and an integrated nozzle wiper to the CORE One L[3] |
| Street price (USD; dated snapshot per entry) | From $1,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,249.00[4] | $1,850.93 on prusa3d.com, Aug 2026; $1,925.00 with the Advanced Filtration bundle. Prusa's own comparison text on the CORE One+ page quotes "from $1,799", which does not match the live e-shop price[5][6] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Single-nozzle machine sharing the H2 body. H2S and H2S Laser Edition are covered by one spec sheet: the Laser Edition adds laser safety windows, the air-assist pump and the 3264x2448 BirdsEye camera, and a plain H2S can be upgraded with a Laser Upgrade Kit. Against the dual-nozzle H2D in the same 492x514x626 mm shell: 30 kg vs 31 kg, 340x320x340 mm single-nozzle volume vs 325x320x325 mm[1][7] | Larger sibling of the CORE One+ (Gen 2): 300 x 300 x 330 mm against 250 x 220 x 270 mm, 60 C chamber against 55 C, 21.9 kg against 22.5 kg (the L is the lighter of the two despite being larger). A CORE One L to CORE One L+ upgrade kit exists, so "CORE One L" and "CORE One L+" are different revisions. A Critical Infrastructure Edition is also listed[2][6][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 340 x 320 x 340 mm (manufacturer figure)[1] | 300 x 300 x 330 mm, which Prusa states as 29.7 litres[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm - the same body as the H2D and H2C[1] | 469 x 521 x 635 mm[2] |
| Net weight (kg) | 30 kg net[1] | 21.9 kg (48.3 lb)[2] |
| Frame construction & material | Aluminium and steel chassis and shell[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, G3 + H12 + coconut-shell carbon filtration[1] | Fully enclosed with a chamber door-open sensor and an active convection heated chamber up to 60 C; advanced filtration is an optional add-on[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | Active convection chamber heating, maximum 60 C (manufacturer figure)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; grouped by Bambu with the H2 enclosed CoreXY machines at 20000 mm/s2[1] | CoreXY - stated in Prusa's CORE One+ comparison table[6] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic drivers on the custom xBuddy mainboard (Prusa's CORE One L+ specification says "custom 32-bit xBuddy mainboard with STM32 processor & Trinamic drivers"; it does not give the driver part number)[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s standard-flow hotend, 65 mm3/s optional high-flow hotend; Bambu's test is a 250 mm round single-wall model in Bambu ABS at 280 C[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input Shaper and Phase Stepping with an integrated accelerometer[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel gears and a Bambu high-precision permanent-magnet synchronous extruder motor; built-in filament cutter[1] | Nextruder direct drive with a 10:1 planetary gear system; all-metal hotend with an aluminium heatsink and a tool-free quick-swap nozzle system[2] |
| Gear ratio & drive gear material | Not documented | 10:1 planetary gearbox[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend, hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; optional high-flow hotend[1] | Tool-free quick-swap nozzle system; Prusa brass high-flow CHT 0.4 mm pre-mounted plus an abrasive-resistant 0.4 mm nozzle in the box[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | 290 C claimed max nozzle temperature. The optional HT hotend that raises this to 400 C was announced for September 2026 availability, so it is not a shipping specification as of Aug 2026[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate and Smooth PEI plate supported[1] | Magnetic heatbed with removable dual-sided PEI spring-steel sheets; a satin powder-coated sheet is supplied[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | High-precision load-cell sensor - fully automatic first-layer calibration and mesh bed levelling restricted to the print area[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[1] | Two filament sensors, plus a chamber door-open sensor and five Semitec thermistors[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hotend cooling fan, main control board fan, chamber exhaust fan, chamber heat-circulation fan and auxiliary part-cooling fan, all closed-loop controlled[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Custom 32-bit xBuddy mainboard with an STM32 processor[2] |
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 2050 W at 220 V, 1170 W at 110 V[1] | Standby 16 W, preheating about 630 W, average printing about 90 W on PLA and about 215 W on ASA (manufacturer figures)[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[8] | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[9][10] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | 3.5-inch 65k-colour touch screen (CORE One family)[6] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app[1] | On-device touch UI with Prusa Connect and Prusa mobile app remote control[6] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Built-in 8 GB eMMC and a USB port; touchscreen, app and PC control interfaces[1] | Ethernet, NFC receiver and Wi-Fi through a physically removable module, which Prusa offers for high-security offline installations[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live-view camera 1920x1080 and toolhead camera 1600x1200; the 3264x2448 BirdsEye camera is fitted only on the Laser Edition[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS[1] | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, and with Advanced Filtration also ABS, ASA, HIPS and PA[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Open-source firmware on the xBuddy platform, which carries hardware overcurrent protection cutting heater and heatbed power above 15 A[11][9] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[12] | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[13][10] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Prusa CORE One L+ product page (CORE One L+ Technical Specifications) prusa3d.com · 2026-08 · vendor
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc