3D Printing InfoPrinter comparison
Bambu Lab H2S vs Prusa CORE One+ (Gen 2) INDX
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2S comparisonsMore Prusa CORE One+ (Gen 2) INDX comparisons
| Property | Bambu Lab H2SCOREXY | Prusa CORE One+ (Gen 2) INDXTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Prusa Research |
| Class | COREXY | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2S; spec sheet header "H2S & H2S Laser Edition Spec Sheet"[1] | Prusa CORE One+ (Gen 2) INDX, listed as "INDX 4-Tool" and "INDX 8-Tool" variants and as an "INDX 8-Tool Assembly kit"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Announced as shipping on 20 August 2026 ("INDX, Shipping Has Started, Complete Printers Open for Orders"). Prusa's own front page in Aug 2026 announces "Prusa CORE One+ (Gen 2) INDX, Shipping Has Started, Complete Printers Open for Orders", with the assembled 8-tool machine quoted as shipping from 15 October and the kit from 29 October[4][2] |
| Street price (USD; dated snapshot per entry) | From $1,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,249.00[5] | $1,850.93 for the INDX 4-Tool and $2,082.41 for the INDX 8-Tool on prusa3d.com, Aug 2026; the 8-Tool assembly kit is $1,804.63. Camera and filtration bundles run to $2,152.78[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Single-nozzle machine sharing the H2 body. H2S and H2S Laser Edition are covered by one spec sheet: the Laser Edition adds laser safety windows, the air-assist pump and the 3264x2448 BirdsEye camera, and a plain H2S can be upgraded with a Laser Upgrade Kit. Against the dual-nozzle H2D in the same 492x514x626 mm shell: 30 kg vs 31 kg, 340x320x340 mm single-nozzle volume vs 325x320x325 mm[1][6] | INDX is a multi-tool option on the CORE One+ (Gen 2) product page rather than a separate printer, sold in 4-tool and 8-tool configurations, plus a CORE One/+ INDX conversion kit for existing machines. All of the body, hotend, bed and electronics figures below come from that shared CORE One+ (Gen 2) page and were not published separately for the INDX machine, so treat them as platform figures. Prusa also sells the unrelated MMU3, which multiplexes five filaments through one nozzle[3][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 340 x 320 x 340 mm (manufacturer figure)[1] | 250 x 220 x 270 mm - the CORE One+ (Gen 2) figure from the shared product page; Prusa does not publish a separate INDX build volume[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm - the same body as the H2D and H2C[1] | 415 x 444 x 555 mm - shared CORE One+ (Gen 2) figure[3] |
| Net weight (kg) | 30 kg net[1] | Not documented |
| Frame construction & material | Aluminium and steel chassis and shell[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, G3 + H12 + coconut-shell carbon filtration[1] | Fully enclosed with active chamber heating up to 55 C (shared CORE One+ platform)[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; grouped by Bambu with the H2 enclosed CoreXY machines at 20000 mm/s2[1] | CoreXY with a multi-tool head-changing system (INDX); Prusa's comparison table gives CoreXY for the CORE One family[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s standard-flow hotend, 65 mm3/s optional high-flow hotend; Bambu's test is a 250 mm round single-wall model in Bambu ABS at 280 C[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel gears and a Bambu high-precision permanent-magnet synchronous extruder motor; built-in filament cutter[1] | Nextruder direct drive, 10:1 planetary gearbox (shared platform)[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend, hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; optional high-flow hotend[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | 290 C claimed max nozzle temperature, 400 C with the optional HT hotend (shared platform)[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | 120 C max heatbed temperature (shared platform)[3] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate and Smooth PEI plate supported[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Load-cell sensor, fully automatic first-layer calibration (shared platform)[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[1] | Filament sensors fitted (two on the CORE One+ platform)[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | INDX gives up to eight filaments; the alternative MMU3 handles five through a single nozzle[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hotend cooling fan, main control board fan, chamber exhaust fan, chamber heat-circulation fan and auxiliary part-cooling fan, all closed-loop controlled[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Custom 32-bit xBuddy board with STM32 (shared platform)[3] |
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 2050 W at 220 V, 1170 W at 110 V[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[7] | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[8][9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | 3.5-inch 65k-colour touch screen (shared platform)[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Built-in 8 GB eMMC and a USB port; touchscreen, app and PC control interfaces[1] | Ethernet and Wi-Fi, USB drive (shared platform)[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live-view camera 1920x1080 and toolhead camera 1600x1200; the 3264x2448 BirdsEye camera is fitted only on the Laser Edition[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS[1] | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB; ABS, ASA, HIPS and PA as advanced materials in the heated chamber (shared platform)[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[10] | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[11][9] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- Prusa blog - Prusa CORE One+ (Gen 2) INDX, Shipping Has Started, Complete Printers Open for Orders (published 20 August 2026) blog.prusa3d.com · 2026-08 · doc
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc