3D Printing InfoPrinter comparison
Bambu Lab H2S vs Creality K2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2S comparisonsMore Creality K2 comparisons
| Property | Bambu Lab H2SCOREXY | Creality K2COREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Creality |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2S; spec sheet header "H2S & H2S Laser Edition Spec Sheet"[1] | Creality K2[2] |
| Street price (USD; dated snapshot per entry) | From $1,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,249.00[3] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Single-nozzle machine sharing the H2 body. H2S and H2S Laser Edition are covered by one spec sheet: the Laser Edition adds laser safety windows, the air-assist pump and the 3264x2448 BirdsEye camera, and a plain H2S can be upgraded with a Laser Upgrade Kit. Against the dual-nozzle H2D in the same 492x514x626 mm shell: 30 kg vs 31 kg, 340x320x340 mm single-nozzle volume vs 325x320x325 mm[1][4] | Smallest of three K2 machines that share a product page. K2: 260 mm cube, no chamber heating, 100 C bed, 300 C nozzle, 8 GB storage, one air filter, one auxiliary cooling fan, 720p camera, no RFID reader, no Ethernet. K2 Pro: 300 mm cube, 60 C chamber, 110 C bed, RFID, Ethernet, 32 GB. K2 Plus: 350 mm cube, 350 C nozzle, 120 C bed, 30000 mm/s2, dual air filters, auto belt tensioning, 1080p camera, dual-band Wi-Fi. A K2 SE also exists as a separate model[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 340 x 320 x 340 mm (manufacturer figure)[1] | 260 x 260 x 260 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm - the same body as the H2D and H2C[1] | 404 x 436 x 545 mm[2] |
| Net weight (kg) | 30 kg net[1] | 18.3 kg[2] |
| Frame construction & material | Aluminium and steel chassis and shell[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, G3 + H12 + coconut-shell carbon filtration[1] | Enclosed, but with no chamber temperature control - Creality's table gives a max chamber temperature for the K2 Pro and K2 Plus and a dash for the K2. One air filter fitted[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; grouped by Bambu with the H2 enclosed CoreXY machines at 20000 mm/s2[1] | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[2] |
| Belts (type, width, e.g. Gates?) | Not documented | Manual belt tensioning (the K2 Plus is auto-adjusted)[2] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | Step-servo motors on the X and Y axes and the extruder (the K2 Plus adds them on Z)[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s max printing speed (manufacturer claim)[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 20000 mm/s2 max acceleration (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s standard-flow hotend, 65 mm3/s optional high-flow hotend; Bambu's test is a 250 mm round single-wall model in Bambu ABS at 280 C[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel gears and a Bambu high-precision permanent-magnet synchronous extruder motor; built-in filament cutter[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend, hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; optional high-flow hotend[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heater cartridge power (W) | Not documented | 70 W rated hotend power[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | 100 C max heatbed temperature - the lowest in the K2 family[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate and Smooth PEI plate supported[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Smart auto levelling fitted; unlike the K2 Pro and Plus there is no nozzle AI camera, so there is no automatic flow-rate calibration[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hotend cooling fan, main control board fan, chamber exhaust fan, chamber heat-circulation fan and auxiliary part-cooling fan, all closed-loop controlled[1] | One auxiliary cooling fan and one air filter[2] |
| Electronics & Power | ||
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 2050 W at 220 V, 1170 W at 110 V[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[5] | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[6][7][2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | 4-inch touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app[1] | Touch UI with alarm sounds; no built-in RFID reader[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Built-in 8 GB eMMC and a USB port; touchscreen, app and PC control interfaces[1] | Wi-Fi 2.4 GHz, USB drive and a Creality 485 port; no Ethernet. 8 GB eMMC storage[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live-view camera 1920x1080 and toolhead camera 1600x1200; the 3264x2448 BirdsEye camera is fitted only on the Laser Edition[1] | One chamber camera, 720p at 30 fps[2] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS[1] | PLA, PETG, PET, ABS, PLA-CF - a shorter list than the K2 Pro and Plus, which add ASA, PA-CF and PPA-CF[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[6][7] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[8] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[9] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor