3D Printing InfoPrinter comparison
Anycubic Vyper vs QIDI Q1 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Vyper comparisonsMore QIDI Q1 Pro comparisons
| Property | Anycubic VyperBEDSLINGER | QIDI Q1 ProCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Vyper[1] | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 22 May 2021 (Shopify publish date)[1] | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $359.00 on store.anycubic.com, Aug 2026, with the compare-at price also $359.00 (no discount running) - notably more than the newer and much faster Kobra 2 at $169[1][4] | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A 2021-generation machine still on sale next to the far faster Kobra line. Its defining differences from every Kobra here: a Bowden extruder rather than direct drive, a 180 mm/s ceiling rather than 300-600 mm/s, and 16-point levelling rather than LeviQ 2.0/3.0. Do not read Kobra performance figures onto it[1][4][5] | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[2][3] |
| Market position: superseded? successor announced? | Effectively superseded by the Kobra line, but still listed for sale on the Anycubic store in Aug 2026[1] | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 245 x 245 mm stated as HWD, i.e. 245 x 245 x 260 mm in the usual X x Y x Z order; Anycubic quotes a 15.6 L build volume[1] | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[2][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 516 x 508 x 457 mm stated as HWD, so the desk footprint is about 508 x 457 mm[1] | 477 x 467 x 489 mm machine dimensions (QIDI)[2][6] |
| Net weight (kg) | 10 kg[1] | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[2][6] |
| Frame construction & material | Not documented | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[2][6] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[2][6] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | CoreXY[6] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[6] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Independent dual Z lead-screw motors[6] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 silent drivers on a 32-bit mainboard with a Cortex-M3 class main control chip - one of the few Anycubic machines where the driver part number is published[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 180 mm/s maximum print speed with 80 mm/s recommended (manufacturer figures)[1] | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[2][6] |
| Recommended/typical print speed | 80 mm/s typical/recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | <=20,000 mm/s2 (manufacturer claim)[2][6] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Anycubic's own Bowden extruder - not direct drive[1] | Direct-drive extruder with hardened steel gears[2][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[2][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C operational nozzle temperature ceiling[1] | <=350 °C claimed. No firmware max_temp verified for this model[2][6] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C operational hot bed temperature ceiling[1] | <=120 °C claimed. No firmware limit verified for this model[2][6] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated stainless spring steel magnetic flexible platform, chosen by Anycubic over carborundum glass to avoid arching[1] | Double-sided textured PEI plate on an aluminium substrate bed[2][6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic levelling[1] | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[6] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[6] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[6] |
| Total rated power draw | 100-240 V AC 50/60 Hz input; 24 V / 14.6 A (350 W) output[1] | 350 W plus 300 W for chamber heating (rated)[2][6] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch LCD touch-control screen[1] | 4.3-inch touchscreen, 272 x 480[2][6] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TransFlash (microSD) card; USB cable connection is flagged by Anycubic as being for expert users only[1] | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[2][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera, up to 1080p, timelapse supported. Framerate not published[2][6] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular design with 4 major pre-assembled modules[1] | Ships fully assembled[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed as a feature; mechanism not published[6] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU and wood-filled filament[1] | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[7] | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[8] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Vyper store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor