3D Printing InfoPrinter comparison
Anycubic Vyper vs Prusa CORE One+ (Gen 2)
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Vyper comparisonsMore Prusa CORE One+ (Gen 2) comparisons
| Property | Anycubic VyperBEDSLINGER | Prusa CORE One+ (Gen 2)COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Prusa Research |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Vyper[1] | Prusa CORE One+ (Gen 2). Prusa's e-shop lists "Prusa CORE One+ (Gen 2)" and "Prusa CORE One+ (Gen 2) Assembly kit"[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 22 May 2021 (Shopify publish date)[1] | The CORE One+ (Gen 2) refresh was announced on 13 August 2026, on sale immediately, with the first assembled units shipping at once and kits, upgrade kits and individual parts rolling out over the following weeks. It succeeds the CORE One and CORE One+ on the same platform[4] |
| Street price (USD; dated snapshot per entry) | $359.00 on store.anycubic.com, Aug 2026, with the compare-at price also $359.00 (no discount running) - notably more than the newer and much faster Kobra 2 at $169[1][5] | $1,202.78 assembled, $925.00 as an assembly kit, on prusa3d.com, Aug 2026. Bundles run to $1,301.85 with camera and advanced filtration. Prusa's own marketing table on the same page quotes "from $1,299" assembled, which does not match the live e-shop price[3][2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A 2021-generation machine still on sale next to the far faster Kobra line. Its defining differences from every Kobra here: a Bowden extruder rather than direct drive, a 180 mm/s ceiling rather than 300-600 mm/s, and 16-point levelling rather than LeviQ 2.0/3.0. Do not read Kobra performance figures onto it[1][5][6] | Three generations share the CORE One name: the original CORE One, the CORE One+, and the CORE One+ (Gen 2), with paid upgrade kits between them (CORE One+ to CORE One+ (Gen 2), and an MK4S to CORE One+ (Gen 2) conversion kit). The specifications recorded here are those published on Prusa's current CORE One+ (Gen 2) page and should not be assumed to hold for a first-generation CORE One. The INDX 4-tool and 8-tool machines are variants of the same product page, and the CORE One L is a larger, separate machine[2][3][7] |
| Market position: superseded? successor announced? | Effectively superseded by the Kobra line, but still listed for sale on the Anycubic store in Aug 2026[1] | Current model and Prusa's mainstream enclosed machine, above the MK4S and below the CORE One L+[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 245 x 245 mm stated as HWD, i.e. 245 x 245 x 260 mm in the usual X x Y x Z order; Anycubic quotes a 15.6 L build volume[1] | 250 x 220 x 270 mm (manufacturer figure)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 516 x 508 x 457 mm stated as HWD, so the desk footprint is about 508 x 457 mm[1] | 415 x 444 x 555 mm (X x Y x Z)[2] |
| Net weight (kg) | 10 kg[1] | 22.5 kg[2] |
| Frame construction & material | Not documented | All-steel exoskeleton (Prusa's own comparison wording, against "aluminium extrusions and frame" for the MK4S)[8] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with a door-open sensor and active chamber temperature control up to 55 C; HEPA/advanced filtration is an optional add-on[2][8] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Active chamber heating, maximum 55 C (manufacturer figure)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | CoreXY - stated as such in Prusa's own comparison table against the Cartesian MK4S[2] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | 0.9 degree X and Y stepper motors[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 silent drivers on a 32-bit mainboard with a Cortex-M3 class main control chip - one of the few Anycubic machines where the driver part number is published[1] | Trinamic 2130[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 180 mm/s maximum print speed with 80 mm/s recommended (manufacturer figures)[1] | Not documented |
| Recommended/typical print speed | 80 mm/s typical/recommended print speed (manufacturer figure)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Anycubic's own Bowden extruder - not direct drive[1] | Nextruder direct drive, E3D V6 compatible with an adapter; planetary gear system with a 10:1 ratio; aluminium heatsink and all-metal hotend[2] |
| Gear ratio & drive gear material | Not documented | 10:1 planetary gearbox[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Quick-swap nozzle system; high-flow Prusa brass CHT 0.4 mm nozzle supplied. An optional HT hotend raises the ceiling to 400 C[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C operational nozzle temperature ceiling[1] | 290 C claimed max nozzle temperature. Prusa's comparison table adds "400 C w/ HT" for the optional HT hotend, which its 13 August 2026 blog post says will only become available in September 2026 - so 400 C is a forthcoming option, not a shipping specification[2][4] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C operational hot bed temperature ceiling[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated stainless spring steel magnetic flexible platform, chosen by Anycubic over carborundum glass to avoid arching[1] | Magnetic heatbed with removable PEI spring-steel sheets; whole-bed heating regardless of object size[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic levelling[1] | Load-cell sensor - fully automatic first-layer calibration with the nozzle as the probe[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Two filament sensors, plus a door sensor and five Semitec thermistors with fan RPM monitoring[2][8] |
| Multi-material/multi-color capability or official upgrade path | Not documented | MMU3 for five filaments, or the INDX system for up to eight, both officially supported[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | High-performance turbine part-cooling fan with 360-degree cooling, the same arrangement as the MK4S[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Custom 32-bit xBuddy board with STM32[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 240 W PSU with hardware power panic[2] |
| Total rated power draw | 100-240 V AC 50/60 Hz input; 24 V / 14.6 A (350 W) output[1] | Power consumption 90 W printing PLA, 110 W printing ABS (manufacturer figures)[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[9][8] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch LCD touch-control screen[1] | 3.5-inch 65k-colour graphic screen with touch control[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | On-device touch UI; remote monitoring and printing through Prusa Connect and the Prusa mobile app; firmware updates from USB, Prusa Connect or the app[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TransFlash (microSD) card; USB cable connection is flagged by Anycubic as being for expert users only[1] | Ethernet and Wi-Fi (NFC receiver plus an optional Wi-Fi module), USB drive for print files[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Optional in-chamber camera solution (Buddy3D camera bundle listed at $1,237.03 against $1,202.78 for the bare printer)[2][3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular design with 4 major pre-assembled modules[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU and wood-filled filament[1] | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, and - as advanced materials in the heated chamber - ABS, ASA, HIPS and PA[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | The xBuddy platform carries hardware overcurrent protection that cuts heater and heatbed power above 15 A, and the firmware is open-source and auditable[10][9] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[11] | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[12][8] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Vyper store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Prusa CORE One L+ product page (CORE One L+ Technical Specifications) prusa3d.com · 2026-08 · vendor
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc