3D Printing InfoPrinter comparison
Anycubic Vyper vs ELEGOO Neptune 4 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Vyper comparisonsMore ELEGOO Neptune 4 Max comparisons
| Property | Anycubic VyperBEDSLINGER | ELEGOO Neptune 4 MaxBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Vyper[1] | ELEGOO Neptune 4 Max[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 22 May 2021 (Shopify publish date)[1] | Listed on the ELEGOO US store from 20 September 2023 (Shopify publish date)[3] |
| Street price (USD; dated snapshot per entry) | $359.00 on store.anycubic.com, Aug 2026, with the compare-at price also $359.00 (no discount running) - notably more than the newer and much faster Kobra 2 at $169[1][4] | $389.00 on us.elegoo.com, Aug 2026, against a compare-at price of $559.99; Ribbon-Cable and Type-C printhead variants are the same price[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A 2021-generation machine still on sale next to the far faster Kobra line. Its defining differences from every Kobra here: a Bowden extruder rather than direct drive, a 180 mm/s ceiling rather than 300-600 mm/s, and 16-point levelling rather than LeviQ 2.0/3.0. Do not read Kobra performance figures onto it[1][4][5] | Largest Neptune 4. The trade-off against the smaller models is easy to miss: the bed only reaches 85 C (against 100 C on the Plus and 110 C on the base Neptune 4) and acceleration is capped at 8000 mm/s2 (against 12000 and 20000), because of the mass of a 430 x 430 mm moving bed. Two printhead variants, Ribbon-Cable and Type-C, are sold under one SKU[2][6][7][3] |
| Market position: superseded? successor announced? | Effectively superseded by the Kobra line, but still listed for sale on the Anycubic store in Aug 2026[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 245 x 245 mm stated as HWD, i.e. 245 x 245 x 260 mm in the usual X x Y x Z order; Anycubic quotes a 15.6 L build volume[1] | 420 x 420 x 480 mm; printing platform 430 x 430 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 516 x 508 x 457 mm stated as HWD, so the desk footprint is about 508 x 457 mm[1] | 658 x 632 x 740 mm; ELEGOO's maximum size for machine activity is 658 x 950 x 960 mm including rack and tray - allow nearly a metre of depth and height[2] |
| Net weight (kg) | 10 kg[1] | 18.1 kg net, 21.8 kg gross[2] |
| Frame construction & material | Not documented | CNC-machined aluminium extrusion frame[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | Cartesian i3 bed-slinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Two lead screws with two tie rods[8] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 silent drivers on a 32-bit mainboard with a Cortex-M3 class main control chip - one of the few Anycubic machines where the driver part number is published[1] | "Silent Drive (All Axes)"; no driver part number published[8] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 180 mm/s maximum print speed with 80 mm/s recommended (manufacturer figures)[1] | 500 mm/s max toolhead speed (manufacturer claim)[2] |
| Recommended/typical print speed | 80 mm/s typical/recommended print speed (manufacturer figure)[1] | 250 mm/s recommended printing speed against the 500 mm/s ceiling (ELEGOO's own figure); default acceleration is 4000 mm/s2[8] |
| Max acceleration (claimed, mm/s²) | Not documented | 8000 mm/s2 max toolhead acceleration (manufacturer claim) - the lowest in the Neptune 4 family[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Anycubic's own Bowden extruder - not direct drive[1] | Dual-gear direct extruder with 2 fans[8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass nozzle, 0.4 mm, with a titanium-alloy heat break[8] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C operational nozzle temperature ceiling[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C operational hot bed temperature ceiling[1] | 85 C max heated bed temperature at 25 C ambient - well below the 100-110 C of the smaller Neptunes, which limits ABS/ASA work despite them being on the compatibility list[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated stainless spring steel magnetic flexible platform, chosen by Anycubic over carborundum glass to avoid arching[1] | PEI spring steel sheet, now upgraded to a dual-sided textured PEI + PLA-specific surface; platform 430 x 430 mm[8] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic levelling[1] | Manual levelling combined with 121-point auto-levelling[8] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection and power-loss resume printing[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[8] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-120 V / 220-240 V, 50/60 Hz[2][8] |
| Total rated power draw | 100-240 V AC 50/60 Hz input; 24 V / 14.6 A (350 W) output[1] | 320 W rated power, 24 V output[8] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[8] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch LCD touch-control screen[1] | 4.3-inch colour capacitive touch screen[8] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[8] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TransFlash (microSD) card; USB cable connection is flagged by Anycubic as being for expert users only[1] | Wi-Fi, USB and WLAN file transfer[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular design with 4 major pre-assembled modules[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU and wood-filled filament[1] | PLA, TPU, PETG, ABS, ASA, Nylon - but note the 85 C bed ceiling against ABS and ASA[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Operating sound published as 65 dB or less - a manufacturer figure with no distance or method stated[8] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[9] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[10] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Vyper store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor