3D Printing InfoPrinter comparison
Anycubic Vyper vs Creality Ender-3 V3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Vyper comparisonsMore Creality Ender-3 V3 comparisons
| Property | Anycubic VyperBEDSLINGER | Creality Ender-3 V3BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Creality |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Vyper[1] | Creality Ender-3 V3, marketed as a CoreXZ machine[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 22 May 2021 (Shopify publish date)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $359.00 on store.anycubic.com, Aug 2026, with the compare-at price also $359.00 (no discount running) - notably more than the newer and much faster Kobra 2 at $169[1][3] | $239.00 on store.creality.com, Aug 2026 (listed as "Ender-3 V3 CoreXZ 3D Printer")[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A 2021-generation machine still on sale next to the far faster Kobra line. Its defining differences from every Kobra here: a Bowden extruder rather than direct drive, a 180 mm/s ceiling rather than 300-600 mm/s, and 16-point levelling rather than LeviQ 2.0/3.0. Do not read Kobra performance figures onto it[1][3][5] | Do not confuse with the Ender-3 V3 SE or KE, which are cheaper and slower and use a conventional bed-slinger gantry - only the V3 and V3 Plus use CoreXZ. The V3 Plus is the same idea scaled to 300 x 300 x 330 mm. Creality's own spec table gives the V3 a 110 C bed, where the SE, KE, V4 and K1 series stop at 100 C[2][6][7] |
| Market position: superseded? successor announced? | Effectively superseded by the Kobra line, but still listed for sale on the Anycubic store in Aug 2026[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 245 x 245 mm stated as HWD, i.e. 245 x 245 x 260 mm in the usual X x Y x Z order; Anycubic quotes a 15.6 L build volume[1] | 220 x 220 x 250 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 516 x 508 x 457 mm stated as HWD, so the desk footprint is about 508 x 457 mm[1] | 358 x 374 x 498 mm[2] |
| Net weight (kg) | 10 kg[1] | 7.83 kg net (Creality); Tom's Hardware rounds it to 7.8 kg[2][8] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | CoreXZ kinematics - the X and Z axes are coupled and driven together, with the bed still moving in Y[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 silent drivers on a 32-bit mainboard with a Cortex-M3 class main control chip - one of the few Anycubic machines where the driver part number is published[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 180 mm/s maximum print speed with 80 mm/s recommended (manufacturer figures)[1] | 600 mm/s max printing speed (manufacturer claim; Creality Lab states the typical speed is 300 mm/s)[2][6] |
| Recommended/typical print speed | 80 mm/s typical/recommended print speed (manufacturer figure)[1] | 300 mm/s typical printing speed (Creality Lab figure quoted on the sibling V3 Plus page for the same CoreXZ platform)[6] |
| Max acceleration (claimed, mm/s²) | Not documented | 20000 mm/s2 max acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Anycubic's own Bowden extruder - not direct drive[1] | New high-speed direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Quick-swap nozzle with a hardened steel tip integrated with the heatbreak (Creality's "unicorn" nozzle), replaced as a unit[2][8] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C operational nozzle temperature ceiling[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C operational hot bed temperature ceiling[1] | 110 C max heatbed temperature - higher than the rest of the Ender-3 V3 family[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated stainless spring steel magnetic flexible platform, chosen by Anycubic over carborundum glass to avoid arching[1] | PEI flexible build plate, removable spring steel[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic levelling[1] | Auto levelling with automatic Z offset (Creality states auto levelling; Tom's Hardware records "Automatic + Z")[2][8] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor fitted[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit mainboard (Creality does not name the board or MCU)[2] |
| Total rated power draw | 100-240 V AC 50/60 Hz input; 24 V / 14.6 A (350 W) output[1] | Rated power 350 W; input 100-120 V / 200-240 V, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Creality Print slicing ecosystem; input shaping with an included G-sensor accelerometer. Creality does not name the firmware base on the V3 page (the sibling KE page states Creality OS is Klipper-based)[2][9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch LCD touch-control screen[1] | 4.3-inch HD colour touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Colour touch UI; power-loss recovery; file transfer from USB drive, WLAN or Creality Cloud[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TransFlash (microSD) card; USB cable connection is flagged by Anycubic as being for expert users only[1] | Wi-Fi; USB drive, WLAN and Creality Cloud file transfer[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | AI camera optional, not fitted as standard[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular design with 4 major pre-assembled modules[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU and wood-filled filament[1] | PLA, TPU, PETG, ABS, PLA-CF, PETG-CF and Creality CR-carbon[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[10] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[11] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Not documented | Benchy in 14 minutes 54 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[8] |
| Review scores from major outlets (list outlet + score + date) | Not documented | Tom's Hardware rating 4.5 out of 5 in the page's structured data[8] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Vyper store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 CoreXZ 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor