3D Printing InfoPrinter comparison
Anycubic Vyper vs Bambu Lab A1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Vyper comparisonsMore Bambu Lab A1 comparisons
| Property | Anycubic VyperBEDSLINGER | Bambu Lab A1BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Bambu Lab |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Vyper[1] | Bambu Lab A1. Store title: "Bambu Lab A1 3D Printer"; spec page header "Bambu Lab A1 - Technical Specifications"[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 22 May 2021 (Shopify publish date)[1] | Announced and first shipped in the northern autumn/winter of 2023. Bambu Lab's own recall notice states A1 units were supplied from 1 December 2023; Tom's Hardware published its A1 review on 14 December 2023, so retail units were in reviewers' hands by then[3][4] |
| Street price (USD; dated snapshot per entry) | $359.00 on store.anycubic.com, Aug 2026, with the compare-at price also $359.00 (no discount running) - notably more than the newer and much faster Kobra 2 at $169[1][5] | From $299.00 (base A1) on the Bambu Lab US store, Aug 2026, during an advertised Back-to-School sale; the A1 product page shows $399.00 with the A1 Combo (A1 + AMS lite) swatch selected[6][7] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A 2021-generation machine still on sale next to the far faster Kobra line. Its defining differences from every Kobra here: a Bowden extruder rather than direct drive, a 180 mm/s ceiling rather than 300-600 mm/s, and 16-point levelling rather than LeviQ 2.0/3.0. Do not read Kobra performance figures onto it[1][5][8] | Two SKUs on one product page: A1 (printer only) and A1 Combo (adds the AMS lite four-spool unit); the printer hardware is identical. Do NOT confuse with the A1 mini (180 mm cube, single Z leadscrew, 80 C bed, 2.4-in screen) or the newer A2L (330x320x325 mm). Contamination example found in the wild: Tom's Hardware's A1 review spec box prints a 2.4-inch screen and a 385x410x430 mm footprint (both A1 mini figures) and titles a section "Included in the box: Bambu Lab A1 Mini", while Bambu's own A1 spec sheet says 3.5-inch screen and 465x410x430 mm[2][4][7] |
| Market position: superseded? successor announced? | Effectively superseded by the Kobra line, but still listed for sale on the Anycubic store in Aug 2026[1] | Still sold new in Aug 2026 alongside the newer and larger A2L ($469 base), which Bambu positions as the mega-size A-series machine[6][9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 245 x 245 mm stated as HWD, i.e. 245 x 245 x 260 mm in the usual X x Y x Z order; Anycubic quotes a 15.6 L build volume[1] | 256 x 256 x 256 mm (manufacturer figure)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 516 x 508 x 457 mm stated as HWD, so the desk footprint is about 508 x 457 mm[1] | 465 x 410 x 430 mm per Bambu's own tech-spec sheet. Tom's Hardware's spec box prints 385 x 410 x 430 mm for the same machine - that is the A1 mini's width, treat Bambu's figure as authoritative. Add clearance behind for Y-axis bed travel and above for the spool[2][4] |
| Net weight (kg) | 10 kg[1] | 8.3 kg net[2] |
| Frame construction & material | Not documented | Steel plus extruded aluminium chassis; Bambu markets all-metal rails and a cover-protected drive system[2][10] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure or door; no official enclosure is sold for the A1[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | Cartesian bed-slinger: toolhead moves in X on the gantry beam, heatbed moves in Y, gantry moves in Z. Bambu's own wiki calls it a Cartesian coordinate motion system; Bambu's marketing page describes it as a "Bed Slinger with CoreXY Speed", which is a comparison, not a kinematic claim[11][10] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear rail: "a high-precision linear rail and a beam", toolhead on a linear guide slider (Bambu wiki). Rail size not published[11] |
| Y-axis guide type | Not documented | Linear rail: heatbed mounted on a guide-rail slider, belt-driven in Y[11] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual linear rods plus dual leadscrews with nuts, both leadscrews driven from one stepper through a synchronous belt with a quick tensioner and a tension-detection algorithm[11] |
| Belts (type, width, e.g. Gates?) | Not documented | Three adjustable belt tensioners (X, Y, Z); a Belt Tension Monitor watches tension and reports out-of-range belts[11] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 silent drivers on a 32-bit mainboard with a Cortex-M3 class main control chip - one of the few Anycubic machines where the driver part number is published[1] | Not published. Bambu's wiki says only that the mainboard "incorporates stepper motor drivers"; no driver part number is given and no teardown source was found that names one[11] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 180 mm/s maximum print speed with 80 mm/s recommended (manufacturer figures)[1] | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Recommended/typical print speed | 80 mm/s typical/recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 10000 mm/s2 max toolhead acceleration (manufacturer claim). Tom's Hardware notes the moving-bed mass is why the A1 does not reach the P1S/X1 20000 mm/s2 figure[2][4] |
| Max volumetric flow claimed (mm³/s) | Not documented | 28 mm3/s claimed, measured by Bambu on a 150x150 mm single-wall model in Bambu ABS at 280 C[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Anycubic's own Bowden extruder - not direct drive[1] | Direct drive, hardened-steel extruder gears, integrated in the toolhead with a filament cutter and filament hub[2][11] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal integrated hotend (nozzle and heatsink combined in one unit) with a quick-swap clip - Bambu markets it as popping in and out with one clip. Stainless-steel nozzle, 0.4 mm included, 0.2/0.6/0.8 mm optional[2][10][11] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C operational nozzle temperature ceiling[1] | 300 C claimed max hot-end temperature; firmware limit not published[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C operational hot bed temperature ceiling[1] | 100 C max build-plate temperature (both the spec sheet and the wiki give 100 C)[2][11] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated stainless spring steel magnetic flexible platform, chosen by Anycubic over carborundum glass to avoid arching[1] | Textured PEI plate included; Bambu Cool Plate, High Temperature Plate and Dual-Texture PEI Plate also compatible[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic levelling[1] | Nozzle-touch probing: the hotend carries an eddy-current sensor that detects nozzle-to-bed contact, giving both automatic bed mesh and automatic Z-offset with no paper method. The same eddy-current sensor doubles as the Y-axis resonance sensor[11][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Yes - filament run-out sensor, plus filament odometry and a filament-tangle sensor. The tangle sensor is a Hall sensor reading a magnet in the toolhead filament hub: excessive feed resistance pulls the hub down, moving the magnet toward the sensor[2][11] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Optional AMS lite (four spools, sold in the A1 Combo); connecting the enclosed-printer AMS / AMS 2 Pro / AMS HT to an A1 additionally requires an AMS HUB accessory (SA013)[7] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | One custom 5015 centrifugal part-cooling fan with two opposing air outlets aimed at the nozzle; closed-loop (RPM-feedback) control[2][11] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Single mainboard carrying a low-power dual-core SoC (with Wi-Fi and Bluetooth basebands and RF), a dual-core MCU and a single-core MCU, plus the stepper drivers. Bambu's spec sheet names the motion controller as a dual-core Cortex-M4. Exact chip markings not published[2] |
| Total rated power draw | 100-240 V AC 50/60 Hz input; 24 V / 14.6 A (350 W) output[1] | 100-240 VAC 50/60 Hz; max power 1300 W at 220 V, 350 W at 110 V. Bed heater wattage is not published separately[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[12] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch LCD touch-control screen[1] | 3.5-inch 320x240 IPS touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Touchscreen UI plus Bambu Handy mobile app and Bambu Studio PC application; Bambu describes the on-device UI as a simplified guided touchscreen system[2][10] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TransFlash (microSD) card; USB cable connection is flagged by Anycubic as being for expert users only[1] | Wi-Fi 2.4 GHz only (IEEE 802.11 b/g/n, 2412-2472 MHz), Bambu-Bus for the AMS lite, microSD card slot. No Ethernet, no USB host port[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in low-rate monitoring camera, up to 1080p, timelapse supported; Bambu's marketing calls out a physical lens cover. Frame rate is not stated for the A1 (the P1 series camera is specified at 0.5 fps)[2][10] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular design with 4 major pre-assembled modules[1] | About 95% pre-assembled; a handful of screws attach the gantry to the base, then the filament wiper and spool holder[4] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU and wood-filled filament[1] | Ideal: PLA, PETG, TPU, PVA. Not recommended: ABS, ASA, PC, PA, PET, carbon/glass-fibre reinforced polymers - the machine is open-frame and the bed stops at 100 C[2] |
| Safety | ||
| Known safety incidents / recalls / fire reports (with sources) | Not documented | Recalled in the US in cooperation with the CPSC: A1 units sold before 30 January 2024 (serial numbers with 'A' as the sixth digit) could suffer heatbed cable damage leading to a short circuit, electric shock or fire. 19 reports of damaged cables, one with observed sparking, no injuries. Remedy was refund plus $80 voucher, or heatbed+cable replacement by a trained technician plus $120 voucher. Current production ships a Kevlar-reinforced heatbed cable with thicker insulation and extended strain relief[3][7] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Manufacturer claim only: bambulab.com states "Silent Mode Under 48 dB" with active motor noise cancelling; the US store page for both the A1 and the A1 mini carries identical copy claiming "49dB Whisper-Quiet Operation". No microphone-based independent measurement with a stated distance was found; Tom's Hardware only says it is "much more quiet than the current crop of speed freak machines"[10][7][4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[13] | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[14] |
| Independently Measured Performance | ||
| Review scores from major outlets (list outlet + score + date) | Not documented | Tom's Hardware: Editor's Choice, rating 4.5 out of 5 in the page's structured data (14 December 2023)[4] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Vyper store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Bambu Lab A1 - Technical Specifications bambulab.com · 2026-08 · vendor
- Bambu Lab - Bambu Lab Recalls A1 3D Printers in the US bambulab.com · 2026-08 · vendor
- Tom's Hardware - Bambu Lab A1 Review, Denise Bertacchi, 14 December 2023 tomshardware.com · 2026-08 · review
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab A1 store page (A1 / A1 Combo variants) us.store.bambulab.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Bambu Lab - Compare all 3D printers (A2L / X2D / H2C columns) bambulab.com · 2026-08 · vendor
- Bambu Lab A1 product page bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - A1 introduction wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor