3D Printing InfoPrinter comparison
Anycubic Photon P1 Max vs Sovol Zero
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Photon P1 Max comparisonsMore Sovol Zero comparisons
| Property | Anycubic Photon P1 MaxRESIN | Sovol ZeroCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Sovol |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Photon P1 Max[1] | Sovol Zero 3D Printer[2][3] |
| Street price (USD; dated snapshot per entry) | $959 advertised single-unit sale/from price; $999 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17.[1] | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00[2][3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not documented | No sibling variants at the time of checking. Sovol positions it against the Voron 0 and Bambu Lab P1P. Note the bed and nozzle limits are higher than the larger SV08 (120 vs 100 °C bed, 350 vs 300 °C nozzle), so SV08 figures must not be carried across[2][4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 285.5 × 214 × 300 mm (X × Y × Z), advertised 18.3 L; usable volume not independently measured.[1] | 152.4 x 152.4 x 152.5 mm advertised[2][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 430 × 414 × 625 mm, manufacturer dimensions; external clearance not specified.[1] | 345 x 420 x 475 mm[2] |
| Net weight (kg) | 23.1 kg (manufacturer specification)[1] | Not documented |
| Frame construction & material | Not documented | Full linear rails on all axes; CoreXY with two motors sharing the moving mass[4] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Fully enclosed[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear rails on all axes[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear guide rails and ball lead screws (manufacturer specification)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints[2][4] |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[2][4] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=50 mm3/s (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Planetary-gear direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating plate. Brass or hardened-steel nozzles in 0.2/0.4/0.6/0.8/1.0 mm[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[2][4] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass or hardened steel, buyer's choice[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed; Sovol states the bed is AC-heated[2][4] |
| Bed surface (material, texture, coating), single/double-sided | Precision-ground steel build platform[1] | Double-sided PEI steel plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Leveling-Free 3.0 with feedback and pre-print self-check (manufacturer claim)[1] | Eddy-current scanning combined with pressure (force) sensing — Sovol describes it as an inductive sensor plus force sensor[2][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor fitted; type and location not published[2][4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616, 1 GB RAM, 8 GB eMMC, 64-bit[2] |
| PSU (brand, wattage, rail voltage) | 296 W power supply (manufacturer specification; not measured consumption)[1] | 150 W / 24 V (this is the DC supply; the bed is separately AC-heated per Sovol)[2][4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named on the product page beyond OTA updates and OrcaSlicer support; Sovol markets the machine as open source[2][4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.5-inch resistive touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and Ethernet; manufacturer advertises LAN isolation mode.[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 not supported)[2][4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera for monitoring; resolution not published[2][4] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Arrives preassembled[4] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[2][4] |
| Materials Support | ||
| Officially supported filament list | Manufacturer lists all Anycubic resins; compatibility with other brands not verified.[1] | PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC[2] |
| Resin & MSLA | ||
| Masking LCD | 14-inch monochrome 12K masking LCD; 24.8 × 24.8 µm XY pixel pitch (manufacturer specification)[1] | Not documented |
| Light source | COB + Fresnel + mask light source[1] | Not documented |
| Light uniformity & intensity | ≥4000 µW/cm² intensity and 92% uniformity (manufacturer claims)[1] | Not documented |
| Vertical print speedmm/h | 15–25 mm/h at 0.05 mm layers with standard resin (manufacturer claim; not independently measured).[1] | Not documented |
| Layer height range | 0.02–0.15 mm layer height[1] | Not documented |
| Release film | NFEP release film; store separately describes its Wave Release system.[1] | Not documented |
| Resin vat & feeding | 1.9 L vat with dynamic temperature control; auto-fill unit not supported.[1] | Not documented |
| Fume extraction | Optional AirPure 2.0 accessory; filtration efficacy not independently verified.[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon P1 Max official store: single-unit price and specifications Anycubic · 2026-10-17 · vendor
- Sovol Zero 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Sovol Zero announcement article (Sovol blog) sovol3d.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor