3D Printing InfoPrinter comparison
Anycubic Photon P1 Max vs QIDI X-Plus 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Photon P1 Max comparisonsMore QIDI X-Plus 3 comparisons
| Property | Anycubic Photon P1 MaxRESIN | QIDI X-Plus 3COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | QIDI |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Photon P1 Max[1] | QIDI X-Plus 3, listed in QIDI navigation as X-Plus3[2][3] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI on the pages checked (Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $959 advertised single-unit sale/from price; $999 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17.[1] | $699 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026. 3DJake lists the model as sold out[3][2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not documented | Two headline-speed figures circulate for this model: QIDI's own US page says 600 mm/s and 35 mm3/s, 3DJake's spec table says <=500 mm/s and 30 mm3/s. This is exactly the kind of sibling contamination the 3-series suffers (X-Max 3 is 600 mm/s / 35 mm3/s). Siblings: X-Max 3 (325x325x315, 900 W) and X-Smart 3 (175x180x170, no chamber heat, 300 °C)[2][3][4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 285.5 × 214 × 300 mm (X × Y × Z), advertised 18.3 L; usable volume not independently measured.[1] | 280 x 280 x 270 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 430 × 414 × 625 mm, manufacturer dimensions; external clearance not specified.[1] | 511 x 527 x 529 mm[2] |
| Net weight (kg) | 23.1 kg (manufacturer specification)[1] | 24.3 kg net[2] |
| Frame construction & material | Not documented | All-metal frame per QIDI's US page; no further breakdown published[3] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Fully enclosed with a heated chamber[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent chamber heating (manufacturer claim)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis of high-strength steel[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear guide rails and ball lead screws (manufacturer specification)[1] | Double Z axis[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | Conflicting manufacturer claims: QIDI's US page says 600 mm/s, 3DJake's spec table says <=500 mm/s. The lower, more conservative figure is used as the sortable value[2][3] |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | Conflicting: 30 mm3/s (3DJake) vs 35 mm3/s (QIDI US page). Lower figure used[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | High-flow direct-drive extruder, 1.75 mm filament[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating core. Copper-alloy nozzle head for normal materials, hardened-steel nozzle head for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Precision-ground steel build platform[1] | Double-sided flexible magnetic RF plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Leveling-Free 3.0 with feedback and pre-print self-check (manufacturer claim)[1] | Automatic bed levelling; probe technology not named[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[2] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2][3] |
| PSU (brand, wattage, rail voltage) | 296 W power supply (manufacturer specification; not measured consumption)[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[2] |
| Total rated power draw | Not documented | 800 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.5-inch resistive touchscreen[1] | 5-inch touchscreen, 800 x 480[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and Ethernet; manufacturer advertises LAN isolation mode.[1] | Wi-Fi (150M 2.4G), Ethernet, USB flash drive[2] |
| Materials Support | ||
| Officially supported filament list | Manufacturer lists all Anycubic resins; compatibility with other brands not verified.[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage (QIDI standard store terms)[6] |
| Resin & MSLA | ||
| Masking LCD | 14-inch monochrome 12K masking LCD; 24.8 × 24.8 µm XY pixel pitch (manufacturer specification)[1] | Not documented |
| Light source | COB + Fresnel + mask light source[1] | Not documented |
| Light uniformity & intensity | ≥4000 µW/cm² intensity and 92% uniformity (manufacturer claims)[1] | Not documented |
| Vertical print speedmm/h | 15–25 mm/h at 0.05 mm layers with standard resin (manufacturer claim; not independently measured).[1] | Not documented |
| Layer height range | 0.02–0.15 mm layer height[1] | Not documented |
| Release film | NFEP release film; store separately describes its Wave Release system.[1] | Not documented |
| Resin vat & feeding | 1.9 L vat with dynamic temperature control; auto-fill unit not supported.[1] | Not documented |
| Fume extraction | Optional AirPure 2.0 accessory; filtration efficacy not independently verified.[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon P1 Max official store: single-unit price and specifications Anycubic · 2026-10-17 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Plus 3 official US page qidiusa.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor