3D Printing InfoPrinter comparison
Anycubic Photon P1 Max vs Bambu Lab H2S
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Photon P1 Max comparisonsMore Bambu Lab H2S comparisons
| Property | Anycubic Photon P1 MaxRESIN | Bambu Lab H2SCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Bambu Lab |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Photon P1 Max[1] | Bambu Lab H2S; spec sheet header "H2S & H2S Laser Edition Spec Sheet"[2] |
| Street price (USD; dated snapshot per entry) | $959 advertised single-unit sale/from price; $999 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17.[1] | From $1,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,249.00[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not documented | Single-nozzle machine sharing the H2 body. H2S and H2S Laser Edition are covered by one spec sheet: the Laser Edition adds laser safety windows, the air-assist pump and the 3264x2448 BirdsEye camera, and a plain H2S can be upgraded with a Laser Upgrade Kit. Against the dual-nozzle H2D in the same 492x514x626 mm shell: 30 kg vs 31 kg, 340x320x340 mm single-nozzle volume vs 325x320x325 mm[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 285.5 × 214 × 300 mm (X × Y × Z), advertised 18.3 L; usable volume not independently measured.[1] | 340 x 320 x 340 mm (manufacturer figure)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 430 × 414 × 625 mm, manufacturer dimensions; external clearance not specified.[1] | 492 x 514 x 626 mm - the same body as the H2D and H2C[2] |
| Net weight (kg) | 23.1 kg (manufacturer specification)[1] | 30 kg net[2] |
| Frame construction & material | Not documented | Aluminium and steel chassis and shell[2] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, G3 + H12 + coconut-shell carbon filtration[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Active chamber heating, maximum 65 C (manufacturer figure)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY - not named in the spec sheet; grouped by Bambu with the H2 enclosed CoreXY machines at 20000 mm/s2[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear guide rails and ball lead screws (manufacturer specification)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 40 mm3/s standard-flow hotend, 65 mm3/s optional high-flow hotend; Bambu's test is a 250 mm round single-wall model in Bambu ABS at 280 C[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive with hardened-steel gears and a Bambu high-precision permanent-magnet synchronous extruder motor; built-in filament cutter[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal hotend, hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; optional high-flow hotend[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 350 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Precision-ground steel build platform[1] | Textured PEI plate and Smooth PEI plate supported[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Leveling-Free 3.0 with feedback and pre-print self-check (manufacturer claim)[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part-cooling fan, hotend cooling fan, main control board fan, chamber exhaust fan, chamber heat-circulation fan and auxiliary part-cooling fan, all closed-loop controlled[2] |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | 296 W power supply (manufacturer specification; not measured consumption)[1] | Not documented |
| Total rated power draw | Not documented | 100-120 VAC / 200-240 VAC 50/60 Hz; 2050 W at 220 V, 1170 W at 110 V[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.5-inch resistive touchscreen[1] | 5-inch 720x1280 touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Touchscreen plus mobile app and PC app[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and Ethernet; manufacturer advertises LAN isolation mode.[1] | Built-in 8 GB eMMC and a USB port; touchscreen, app and PC control interfaces[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Live-view camera 1920x1080 and toolhead camera 1600x1200; the 3264x2448 BirdsEye camera is fitted only on the Laser Edition[2] |
| Materials Support | ||
| Officially supported filament list | Manufacturer lists all Anycubic resins; compatibility with other brands not verified.[1] | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[6] |
| Resin & MSLA | ||
| Masking LCD | 14-inch monochrome 12K masking LCD; 24.8 × 24.8 µm XY pixel pitch (manufacturer specification)[1] | Not documented |
| Light source | COB + Fresnel + mask light source[1] | Not documented |
| Light uniformity & intensity | ≥4000 µW/cm² intensity and 92% uniformity (manufacturer claims)[1] | Not documented |
| Vertical print speedmm/h | 15–25 mm/h at 0.05 mm layers with standard resin (manufacturer claim; not independently measured).[1] | Not documented |
| Layer height range | 0.02–0.15 mm layer height[1] | Not documented |
| Release film | NFEP release film; store separately describes its Wave Release system.[1] | Not documented |
| Resin vat & feeding | 1.9 L vat with dynamic temperature control; auto-fill unit not supported.[1] | Not documented |
| Fume extraction | Optional AirPure 2.0 accessory; filtration efficacy not independently verified.[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon P1 Max official store: single-unit price and specifications Anycubic · 2026-10-17 · vendor
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor