3D Printing InfoPrinter comparison
Anycubic Photon Mono M7 Max vs UltiMaker Factor 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Photon Mono M7 Max comparisonsMore UltiMaker Factor 4 comparisons
| Property | Anycubic Photon Mono M7 MaxRESIN | UltiMaker Factor 4INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | UltiMaker |
| Class | RESIN | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Photon Mono M7 Max[1] | UltiMaker Factor 4[2] |
| Release date (announcement and actual shipping) | Not documented | Announced 22 April 2024, shown at HANNOVER MESSE 2024 (22-26 April) and TCT Asia (7-9 May 2024)[2] |
| Launch MSRP (USD) | Not documented | Starting at approximately $20,000[2] |
| Street price (USD; dated snapshot per entry) | $749 advertised base sale/from price; $899 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17.[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not documented | Shares the 330 x 240 x 300 mm envelope with the UltiMaker S5, S7 and S8, which is the single most contaminated figure in UltiMaker's range. What separates the Factor 4 is the actively controlled 70 °C build volume, the climate-controlled 6-spool material station holding humidity below 15%, and HEPA filtration. UltiMaker also sells a Factor 4 Plus[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 298 × 164 × 300 mm (X × Y × Z), advertised 14.7 L; usable volume not independently measured.[1] | 330 x 240 x 300 mm[2] |
| Net weight (kg) | 24 kg (manufacturer specification)[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Enclosed with actively controlled chamber airflow and a HEPA filter[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Build volume temperature controlled up to 70 °C with actively controlled chamber airflow (manufacturer specification)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Direct-drive dual extrusion; kinematic layout not stated in the source checked[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear Z rails; manufacturer states 10 µm precision.[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct-drive dual extrusion[2] |
| Filament diameter | Not documented | 2.85 mm[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 340 °C maximum with the high-temperature print core (manufacturer claim)[2] |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved aluminium build plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Four-point manual leveling[1] | Not documented |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Automatic climate-controlled material handling and storage station holding humidity below 15%, storing up to six spools[2] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | HEPA filter[2] |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | 180 W power supply (manufacturer specification; not measured consumption)[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi; store still labels LAN as scheduled, so availability is unverified.[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | UltiMaker-branded PPS CF, PLA, Tough PLA, Nylon, PETG, PET CF and PVA, plus validated third-party materials from BASF Forward AM, Kimya, Polymaker, LEHVOSS and Jabil[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy within +/-0.2 mm or +/-0.2% of feature nominal length; UltiMaker states it tested over 95% print-completion success. Manufacturer figures, not independent measurements[2] |
| Resin & MSLA | ||
| Masking LCD | 13.6-inch monochrome 7K masking LCD, 46 × 46 µm XY pixel pitch (manufacturer specification)[1] | Not documented |
| Light source | COB + Fresnel lens + light-uniformity algorithm[1] | Not documented |
| Light uniformity & intensity | 4500 ±10% µW/cm² (manufacturer specification)[1] | Not documented |
| Vertical print speedmm/h | Standard resin: ≤31 mm/h at 0.05 mm layers; ≤63 mm/h at 0.1 mm. High-speed resin: ≤86 mm/h at 0.1 mm. Manufacturer table also labels ≤63 mm/h as maximum; headline figures differ. No independent measurement added.[1] | Not documented |
| Layer height range | 0.01–0.15 mm layer height[1] | Not documented |
| Release film | Improved ACF film (manufacturer description)[1] | Not documented |
| Resin vat & feeding | ≤1.3 L vat, dynamic resin temperature control and auto-fill/recycling support (manufacturer specifications).[1] | Not documented |
| Fume extraction | Optional air purifier; filtration efficacy not independently verified.[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Max official store: base price and specifications Anycubic · 2026-10-17 · vendor
- UltiMaker Factor 4: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review