3D Printing InfoPrinter comparison
Anycubic Photon Mono M7 Max vs ELEGOO Neptune 4 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Photon Mono M7 Max comparisonsMore ELEGOO Neptune 4 Plus comparisons
| Property | Anycubic Photon Mono M7 MaxRESIN | ELEGOO Neptune 4 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | RESIN | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Photon Mono M7 Max[1] | ELEGOO Neptune 4 Plus[2] |
| Release date (announcement and actual shipping) | Not documented | Listed on the ELEGOO US store from 20 September 2023 (Shopify publish date), the same date as the Neptune 4 Max[3][4] |
| Street price (USD; dated snapshot per entry) | $749 advertised base sale/from price; $899 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17.[1] | $309.00 on us.elegoo.com, Aug 2026, against a compare-at price of $425.00. Only a Ribbon-Cable printhead variant is listed for the Plus, unlike the Neptune 4 and 4 Max which also offer a Type-C version[3][5][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not documented | Middle model of the Neptune 4 family. Against the base Neptune 4: bigger (320 x 320 x 385 mm), but a lower bed ceiling (100 C rather than 110 C) and much lower acceleration (12000 rather than 20000 mm/s2). Against the Max: smaller and lighter (14.4 kg against 18.1 kg) but with a higher bed ceiling (100 C against 85 C) and higher acceleration (12000 against 8000). Its Z drive is 2 lead screws with 2 tie rods, where the Centauri machines use 3 lead screws[2][6][7][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 298 × 164 × 300 mm (X × Y × Z), advertised 14.7 L; usable volume not independently measured.[1] | 320 x 320 x 385 mm; printing platform 330 x 330 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 533 x 517 x 638 mm; ELEGOO also publishes a maximum size for machine activity of 578 x 750 x 860 mm including rack and tray, so allow 750 mm of depth[2] |
| Net weight (kg) | 24 kg (manufacturer specification)[1] | 14.4 kg net, 16.65 kg gross[2] |
| Frame construction & material | Not documented | CNC-machined aluminium extrusion frame (Neptune 4 family)[6] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Cartesian i3 bed-slinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear Z rails; manufacturer states 10 µm precision.[1] | Two lead screws with two tie rods[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)" is all ELEGOO publishes; the driver part number is not given on the product page[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 30-500 mm/s printing speed, with 250 mm/s given by ELEGOO as the recommended figure - the 500 mm/s number is a ceiling, not a working speed[2] |
| Recommended/typical print speed | Not documented | 250 mm/s recommended printing speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 12000 mm/s2 maximum acceleration; default acceleration 5000 mm/s2[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Dual-gear direct extruder with 2 fans (the Centauri machines use a 1-fan version)[2][8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass nozzle, 0.4 mm, with a titanium-alloy heat break[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 C max heated bed temperature at 25 C ambient[2] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved aluminium build plate[1] | PEI spring steel sheet; ELEGOO notes it is now upgraded to a dual-sided textured PEI + PLA-specific surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Four-point manual leveling[1] | Manual levelling combined with 121-point auto-levelling[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor and power-loss recovery; no camera, no clog detection, no auto filament unloading[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | ELEGOO describes it only as a "Klipper High-Speed Quiet Motherboard" - no board model or MCU is published[2] |
| PSU (brand, wattage, rail voltage) | 180 W power supply (manufacturer specification; not measured consumption)[1] | Not documented |
| Total rated power draw | Not documented | 320 W rated power; 24 V output; 110-120 V / 220-240 V input[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper (ELEGOO names the system "Klipper" outright for the Neptune 4 Plus, rather than the ELEGOO OS branding used on the Centauri machines)[2][8] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[1] | 4.3-inch colour capacitive touch screen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Colour capacitive touch UI; ElegooSlicer is recommended, with Orca and Cura also supported[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi; store still labels LAN as scheduled, so availability is unverified.[1] | USB, LAN and Wi-Fi[2] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, TPU, PETG, ABS, ASA, Nylon[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Operating sound is published as 65 dB or less - a manufacturer figure with no measuring distance or method given, so it is not comparable with a reviewer's dB reading[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[9] |
| Resin & MSLA | ||
| Masking LCD | 13.6-inch monochrome 7K masking LCD, 46 × 46 µm XY pixel pitch (manufacturer specification)[1] | Not documented |
| Light source | COB + Fresnel lens + light-uniformity algorithm[1] | Not documented |
| Light uniformity & intensity | 4500 ±10% µW/cm² (manufacturer specification)[1] | Not documented |
| Vertical print speedmm/h | Standard resin: ≤31 mm/h at 0.05 mm layers; ≤63 mm/h at 0.1 mm. High-speed resin: ≤86 mm/h at 0.1 mm. Manufacturer table also labels ≤63 mm/h as maximum; headline figures differ. No independent measurement added.[1] | Not documented |
| Layer height range | 0.01–0.15 mm layer height[1] | Not documented |
| Release film | Improved ACF film (manufacturer description)[1] | Not documented |
| Resin vat & feeding | ≤1.3 L vat, dynamic resin temperature control and auto-fill/recycling support (manufacturer specifications).[1] | Not documented |
| Fume extraction | Optional air purifier; filtration efficacy not independently verified.[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Max official store: base price and specifications Anycubic · 2026-10-17 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor