3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M5s vs Stratasys F370
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M5s comparisonsMore Stratasys F370 comparisons
| Property | ANYCUBIC Photon Mono M5sRESIN | Stratasys F370INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Stratasys |
| Class | RESIN | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M5s[1][2] | Stratasys F370, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Not documented | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $609.00 on store.anycubic.com, with the compare-at price also $609.00, but marked Sold out, checked Aug 2026. 3DJake also shows it sold out and delisted[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Older and smaller than the M7 family: 12K LCD (11520 x 5120) vs 14K, 218 x 123 x 200 mm vs 223 x 126 x 230, an LED-matrix light source rather than COB + Fresnel, and 105 vs 150-170 mm/h on high-speed resin. Note Anycubic's spec table lists the machine dimensions in H x W x D order[1][2][4][5] | Top of the series and the only one with ABS-ESD7, PC-ABS and Diran 410MF07, an Insight software licence, and ProtectAM with US DoD STIG compliance on Red Hat Enterprise Linux. Cabinet and weight are identical to the F170 and F270, so footprint tells you nothing about which model you have[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 218 x 123 x 200 mm (Anycubic quotes 5.4 L; the table writes it as 200 x 218 x 123 mm in H x W x D order)[1][2] | 355 x 254 x 355 mm (14 x 10 x 14 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 460 x 270 x 290 mm (H x W x D per Anycubic; 3DJake writes 270 x 290 x 460 mm)[1][2] | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[3] |
| Net weight (kg) | 8.9 kg[1][2] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | Not documented | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Enclosed build chamber[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on double linear guides, straight-lift peel[1][2] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double linear guides, 10 um precision[1] | Not documented |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved aluminium-alloy build platform[1][2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free design[1][2] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Total rated power draw | 100 W rated[1][2] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch TFT touchscreen (control panel — not the masking LCD, see W1)[1][2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB Type-A 2.0 and Wi-Fi[1][2] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin; no closed compatibility list published on this page[1] | PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF072, FDM TPU 92A, PC-ABS, ABS-CF10, with QSR soluble support. Diran and PLA use breakaway rather than soluble support[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 12K, 11,520 x 5,120 px, 480:1 contrast, XY pixel pitch 19 x 24 um (manufacturer specification)[1][2] | Not documented |
| Light source | LED matrix UV light source. Anycubic does not publish wavelength or collimating optics for this model[1][2] | Not documented |
| Vertical print speedmm/h | 105 mm/h with high-speed resin, 70 mm/h with standard resin (manufacturer claims; Anycubic labels these average printing speeds and does not state the layer height assumed)[1][2] | Not documented |
| LCD life & replaceability | Swappable scratchproof screen protector film over the masking LCD. Anycubic publishes no rated screen life in hours[2] | Not documented |
| Resin vat & feeding | Unibody resin vat with scale lines. Capacity not published; no auto-refill and no level sensing stated for this model[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M5s product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M5s technical data table 3djake.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor