3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M5s vs Rat Rig V-Core 4.1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M5s comparisonsMore Rat Rig V-Core 4.1 comparisons
| Property | ANYCUBIC Photon Mono M5sRESIN | Rat Rig V-Core 4.1COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Rat Rig |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M5s[1][2] | Rat Rig V-Core 4.1, described by Rat Rig as a large-format open CoreXY 3D printer kit[3] |
| Street price (USD; dated snapshot per entry) | $609.00 on store.anycubic.com, with the compare-at price also $609.00, but marked Sold out, checked Aug 2026. 3DJake also shows it sold out and delisted[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Older and smaller than the M7 family: 12K LCD (11520 x 5120) vs 14K, 218 x 123 x 200 mm vs 223 x 126 x 230, an LED-matrix light source rather than COB + Fresnel, and 105 vs 150-170 mm/h on high-speed resin. Note Anycubic's spec table lists the machine dimensions in H x W x D order[1][2][4][5] | Three sizes, all at the same base-kit price. Acceleration is the size-dependent figure and the one most often mis-quoted: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm. IDEX is a configuration option and changes the usable area per toolhead (copy mode 150x150x300 at the 300 size, mirror mode 95x95x300). Base kit excludes electronics. Rat Rig prices the base kit only in EUR (EUR 873.90 on sale from EUR 971.00, Aug 2026); no USD list price is published, so no USD street price is recorded here[3] |
| Market position: superseded? successor announced? | Not documented | Current revision, replacing the V-Core 4; Rat Rig sells a 4.1 upgrade kit for existing V-Core 4 machines[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 218 x 123 x 200 mm (Anycubic quotes 5.4 L; the table writes it as 200 x 218 x 123 mm in H x W x D order)[1][2] | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 460 x 270 x 290 mm (H x W x D per Anycubic; 3DJake writes 270 x 290 x 460 mm)[1][2] | 623.2 x 583 x 785 mm (300); 723.2 x 683 x 885 mm (400); 823.2 x 783 x 985 mm (500). Sortable value is the 300 mm kit[3] |
| Net weight (kg) | 8.9 kg[1][2] | Kit weight 35 kg (300), 45 kg (400), 55 kg (500)[3] |
| Frame construction & material | Not documented | 30-series aluminium extrusion; the 4.1 adds a steel X-axis gantry for rigidity[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Open frame in the base kit[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on double linear guides, straight-lift peel[1][2] | CoreXY; Hybrid CoreXY and IDEX are configuration options[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double linear guides, 10 um precision[1] | Not documented |
| Speed & Acceleration | ||
| Max acceleration (claimed, mm/s²) | Not documented | Size-dependent: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm (manufacturer claims)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Full-metal skeleton toolhead, new in the 4.1[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 350 °C maximum nozzle temperature (manufacturer claim)[3] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm hardened steel and 0.6 mm included[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 120 °C maximum heatbed temperature (manufacturer claim). The 400 and 500 sizes get 8 mm thick beds in the 4.1[3] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved aluminium-alloy build platform[1][2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free design[1][2] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Improved part cooling, listed by Rat Rig as one of the 4.1 changes[3] |
| Electronics & Power | ||
| Total rated power draw | 100 W rated[1][2] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | RatOS 2.1 (Rat Rig's Klipper distribution)[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch TFT touchscreen (control panel — not the masking LCD, see W1)[1][2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB Type-A 2.0 and Wi-Fi[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; the 4.1 ships pre-made cables that need no crimping, with rewritten step-by-step build documentation[3] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin; no closed compatibility list published on this page[1] | PLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF[3] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 12K, 11,520 x 5,120 px, 480:1 contrast, XY pixel pitch 19 x 24 um (manufacturer specification)[1][2] | Not documented |
| Light source | LED matrix UV light source. Anycubic does not publish wavelength or collimating optics for this model[1][2] | Not documented |
| Vertical print speedmm/h | 105 mm/h with high-speed resin, 70 mm/h with standard resin (manufacturer claims; Anycubic labels these average printing speeds and does not state the layer height assumed)[1][2] | Not documented |
| LCD life & replaceability | Swappable scratchproof screen protector film over the masking LCD. Anycubic publishes no rated screen life in hours[2] | Not documented |
| Resin vat & feeding | Unibody resin vat with scale lines. Capacity not published; no auto-refill and no level sensing stated for this model[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M5s product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M5s technical data table 3djake.com · 2026-08 · vendor
- Rat Rig V-Core 4.1 product page ratrig.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor