3D Printing InfoPrinter comparison
Anycubic Kobra 4 vs QIDI X-Plus 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 4 comparisonsMore QIDI X-Plus 3 comparisons
| Property | Anycubic Kobra 4BEDSLINGER | QIDI X-Plus 3COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 4[1] | QIDI X-Plus 3, listed in QIDI navigation as X-Plus3[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 29 May 2026 (Shopify publish date)[4] | Not published by QIDI on the pages checked (Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $279.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $379.00 ($320.90 for the EU plug variant)[4] | $699 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026. 3DJake lists the model as sold out[3][2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares its 260 mm cube volume and its exact machine dimensions (455.4 x 445.3 x 461.3 mm) with the Kobra X, so those two cannot be told apart on size. The difference is multicolour: the Kobra X ships with native 4-colour capability, while the Kobra 4 needs an ACE 2 Pro unit for multicolour and drying. The Kobra 4 also has a smaller 3.5-inch screen where the Kobra 3 and S1 use 4.3-inch panels[1][5][6] | Two headline-speed figures circulate for this model: QIDI's own US page says 600 mm/s and 35 mm3/s, 3DJake's spec table says <=500 mm/s and 30 mm3/s. This is exactly the kind of sibling contamination the 3-series suffers (X-Max 3 is 600 mm/s / 35 mm3/s). Siblings: X-Max 3 (325x325x315, 900 W) and X-Smart 3 (175x180x170, no chamber heat, 300 °C)[2][3][7][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 280 x 280 x 270 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 455.4 x 445.3 x 461.3 mm for the printer; the optional ACE 2 Pro is a separate 368 x 291.5 x 236.5 mm unit[1] | 511 x 527 x 529 mm[2] |
| Net weight (kg) | 9.9 kg for the printer (ACE 2 Pro 3.7 kg); packaged 12.6 kg bare or 17.5 kg as the Combo[1] | 24.3 kg net[2] |
| Frame construction & material | Not documented | All-metal frame per QIDI's US page; no further breakdown published[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with a heated chamber[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent chamber heating (manufacturer claim)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's table gives the construction as "Gantry system" - a bed-slinger, not CoreXY[1] | CoreXY[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis of high-strength steel[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Double Z axis[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s the default[1] | Conflicting manufacturer claims: QIDI's US page says 600 mm/s, 3DJake's spec table says <=500 mm/s. The lower, more conservative figure is used as the sortable value[2][3] |
| Recommended/typical print speed | 300 mm/s default print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | 20,000 mm/s2 (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | Conflicting: 30 mm3/s (3DJake) vs 35 mm3/s (QIDI US page). Lower figure used[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion")[1] | High-flow direct-drive extruder, 1.75 mm filament[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzle, 0.4 mm standard with 0.25, 0.6 and 0.8 mm optional[1] | Ceramic heating core. Copper-alloy nozzle head for normal materials, hardened-steel nozzle head for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | <=350 °C claimed[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C maximum hotbed temperature on a PEI spring steel build plate[1] | <=120 °C claimed[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided flexible magnetic RF plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 49-point auto-levelling with Z-offset; Anycubic claims levelling repeatability under 0.02 mm and states no manual compensation is needed[1] | Automatic bed levelling; probe technology not named[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament detection fitted; type and location not published[2] |
| Multi-material/multi-color capability or official upgrade path | Multicolour and active drying both require the separate ACE 2 Pro unit; Anycubic quotes 4 independent brushless feed motors in that unit[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2][3] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[2] |
| Total rated power draw | Not documented | 800 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration; a built-in accelerometer drives vibration compensation[1] | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch capacitive touchscreen - smaller than the 4.3-inch panels on the Kobra 3 and S1 series[1][6][9] | 5-inch touchscreen, 800 x 480[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Anycubic Slicer, the Anycubic app and USB; AI spaghetti detection and object skip supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Anycubic Slicer and the Anycubic app[1] | Wi-Fi (150M 2.4G), Ethernet, USB flash drive[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera fitted, 720p[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Anycubic claims assembly and first print within 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU 95A - and Anycubic notes TPU 95A cannot be used through the ACE 2 Pro[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode and 45 dB or less in silent print mode - manufacturer figures with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[10] | 1-year coverage (QIDI standard store terms)[11] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Anycubic claims a 14-minute Benchy - a manufacturer figure with no slicer settings published, not an independent measurement[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Plus 3 official US page qidiusa.com · 2026-08 · vendor
- Anycubic Kobra 4 Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra X product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor