3D Printing InfoPrinter comparison
Anycubic Kobra 4 vs Bambu Lab X2D
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 4 comparisonsMore Bambu Lab X2D comparisons
| Property | Anycubic Kobra 4BEDSLINGER | Bambu Lab X2DCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Bambu Lab |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 4[1] | Bambu Lab X2D; spec PDF header "X2D Spec"[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 29 May 2026 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $279.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $379.00 ($320.90 for the EU plug variant)[3] | From $649.00 on the Bambu Lab US store, Aug 2026; the compare page shows the same $649 figure[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares its 260 mm cube volume and its exact machine dimensions (455.4 x 445.3 x 461.3 mm) with the Kobra X, so those two cannot be told apart on size. The difference is multicolour: the Kobra X ships with native 4-colour capability, while the Kobra 4 needs an ACE 2 Pro unit for multicolour and drying. The Kobra 4 also has a smaller 3.5-inch screen where the Kobra 3 and S1 use 4.3-inch panels[1][5][6] | Dual-nozzle machine: a main hotend with a permanent-magnet synchronous extruder motor and an auxiliary hotend with a plain stepper motor, so the two nozzles are not equivalent. Bambu publishes four different build volumes depending on which nozzle is used, and a shorter list of materials for the auxiliary nozzle. Physical dimensions (392x406x478 mm) are shared with the P2S but the X2D is 16.25 kg against the P2S's 14.9 kg[2][7] |
| Market position: superseded? successor announced? | Not documented | Current model, launched into the slot vacated by the discontinued X1-Carbon[4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | Main nozzle 256 x 256 x 260 mm; auxiliary nozzle 235.5 x 256 x 256 mm; dual-nozzle printing 235.5 x 256 x 256 mm; total volume for two nozzles 256 x 256 x 260 mm. The sortable figure below is the main-nozzle volume[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 455.4 x 445.3 x 461.3 mm for the printer; the optional ACE 2 Pro is a separate 368 x 291.5 x 236.5 mm unit[1] | 392 x 406 x 478 mm[2] |
| Net weight (kg) | 9.9 kg for the printer (ACE 2 Pro 3.7 kg); packaged 12.6 kg bare or 17.5 kg as the Combo[1] | 16.25 kg net[2] |
| Frame construction & material | Not documented | Plastic and steel chassis; plastic, glass and metal outer frame[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with a door sensor, active chamber heating to 65 C, and a G3 + H12 HEPA + granulated coconut-shell carbon filter stack with an external exhaust fan[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Active chamber heating, maximum 65 C (manufacturer figure)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's table gives the construction as "Gantry system" - a bed-slinger, not CoreXY[1] | CoreXY - not stated in the spec sheet; Bambu groups the X2D with its enclosed CoreXY machines and publishes the same 20000 mm/s2 acceleration figure[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s the default[1] | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Recommended/typical print speed | 300 mm/s default print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 40 mm3/s, measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion")[1] | Two direct-drive extruders: main extruder with hardened-steel gears driven by a Bambu high-precision permanent-magnet synchronous motor, auxiliary extruder with hardened-steel gears driven by a stepper motor[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzle, 0.4 mm standard with 0.25, 0.6 and 0.8 mm optional[1] | Dual hardened-steel nozzles; 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; built-in filament cutter[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C maximum hotbed temperature on a PEI spring steel build plate[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible steel plate, Textured PEI included; Smooth PEI, Cool Plate SuperTack and Engineering Plate supported[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 49-point auto-levelling with Z-offset; Anycubic claims levelling repeatability under 0.02 mm and states no manual compensation is needed[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[2] |
| Multi-material/multi-color capability or official upgrade path | Multicolour and active drying both require the separate ACE 2 Pro unit; Anycubic quotes 4 independent brushless feed motors in that unit[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part-cooling fan, hotend cooling fan, main control board fan, chamber heat-circulation fan, auxiliary part-cooling fan and external exhaust fan, all closed-loop controlled[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Motion controller dual-core Cortex-M4 plus single-core Cortex-M7; application processor quad-core ARM with a dedicated NPU (2 TOPS per the compare page)[2][8] |
| Total rated power draw | Not documented | High-voltage version 1600 W at 220 V, low-voltage version 1100 W at 110 V; steady state 250 W printing PLA and 550 W printing PC at 25 C ambient[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration; a built-in accelerometer drives vibration compensation[1] | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch capacitive touchscreen - smaller than the 4.3-inch panels on the Kobra 3 and S1 series[1][6][10] | 5-inch 1280x720 touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Anycubic Slicer, the Anycubic app and USB; AI spaghetti detection and object skip supported[1] | Touchscreen plus mobile app and PC app[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Anycubic Slicer and the Anycubic app[1] | Dual-band Wi-Fi (802.11 a/b/g/n), built-in 8 GB eMMC and a USB port; Ethernet not available, no network kill switch, no 802.1X[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera fitted, 720p[1] | Two cameras: live-view 1920x1080 and a toolhead camera at 1600x1200[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Anycubic claims assembly and first print within 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU 95A - and Anycubic notes TPU 95A cannot be used through the ACE 2 Pro[1] | Main hotend: PLA, PETG, ABS, ASA, TPU, support materials, PET, PA, PC, PVA and carbon/glass-fibre reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET. Auxiliary hotend drops PPA-CF/GF and excludes PLA Aero; PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS and PA/PET support material are flagged "print with caution" on the auxiliary nozzle[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode and 45 dB or less in silent print mode - manufacturer figures with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[11] | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[12] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Anycubic claims a 14-minute Benchy - a manufacturer figure with no slicer settings published, not an independent measurement[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Bambu Lab X2D Spec (PDF) store.bblcdn.com · 2026-08 · doc
- Anycubic Kobra 4 Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Anycubic Kobra X product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Bambu Lab P2S Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab - Compare all 3D printers (A2L / X2D / H2C columns) bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor