3D Printing InfoPrinter comparison
Anycubic Kobra 2 vs Stratasys F270
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 comparisonsMore Stratasys F270 comparisons
| Property | Anycubic Kobra 2BEDSLINGER | Stratasys F270INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Stratasys |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2[1] | Stratasys F270, part of the Stratasys F123 Series[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 15 May 2023 (Shopify publish date)[1] | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[2] |
| Street price (USD; dated snapshot per entry) | $169.00 on store.anycubic.com, Aug 2026, against a compare-at price of $279.00 - the cheapest machine in this file[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base model of a five-way family that is easy to confuse. All of Kobra 2, Kobra 2 Neo and Kobra 2 Pro share the same 220 x 220 x 250 mm build volume, but their speed ceilings differ: Neo 250 mm/s max / 150 typical, Kobra 2 300 / 200, Kobra 2 Pro 500 / 300. The Plus (320 x 320 x 400 mm) and Max (420 x 420 x 500 mm) are bigger but drop the bed ceiling to 90 C where the three small ones reach 110 C. Anycubic's own note: Kobra 2 firmware must be at V3.0.6 or above for the quoted speed[1][3][4][5][6] | Middle of the full-cabinet trio. Same materials as the F170 but a larger build size; the F370 adds ABS-ESD7, PC-ABS and Diran 410MF07 and is the only model with Insight and DoD STIG compliance. All three full-cabinet models share the same 1,626 x 864 x 711 mm footprint and 227 kg weight[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm in X x Y x Z; Anycubic quotes 12.1 L[1] | 305 x 254 x 305 mm (12 x 10 x 12 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 440 x 435 mm stated as HWD, so the desk footprint is about 440 x 435 mm and the height is 486 mm[1] | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[2] |
| Net weight (kg) | 8.4 kg[1] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[2] |
| Frame construction & material | Not documented | Fully enclosed office/classroom-grade cabinet, factory assembled[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed build chamber[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame; Anycubic describes double metal spindles with SG15 bearings on the moving axes[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double-threaded rod Z axis (dual lead screws)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 300 mm/s maximum print speed (Anycubic Lab figure; firmware V3.0.6 or above required)[1] | Not documented |
| Recommended/typical print speed | 200 mm/s recommended print speed (manufacturer figure) - the number to plan around, not the 300 mm/s headline[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 3000 mm/s2 acceleration (manufacturer figure) - modest next to the 20000 mm/s2 of the current Kobra generation[1][7] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a dual-geared extrusion structure[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | Not documented |
| Heater cartridge power (W) | 60 W hotend heater (Anycubic states "upgraded extruder power reaches up to 60 watts")[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset and a user-adjustable Z compensation value[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted, with power-loss recovery[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan rated to 7000 rpm (Anycubic figure)[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | microSD card[1] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular assembly - Anycubic states 5 pieces in about 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU[1] | PLA, ABS-M30, ASA, FDM TPU 92A, ABS-CF10, with QSR soluble support[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[8] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor