3D Printing InfoPrinter comparison
Anycubic Kobra 2 vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 comparisonsMore Snapmaker Artisan comparisons
| Property | Anycubic Kobra 2BEDSLINGER | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Snapmaker |
| Class | BEDSLINGER | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2[1] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 15 May 2023 (Shopify publish date)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $169.00 on store.anycubic.com, Aug 2026, against a compare-at price of $279.00 - the cheapest machine in this file[1] | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base model of a five-way family that is easy to confuse. All of Kobra 2, Kobra 2 Neo and Kobra 2 Pro share the same 220 x 220 x 250 mm build volume, but their speed ceilings differ: Neo 250 mm/s max / 150 typical, Kobra 2 300 / 200, Kobra 2 Pro 500 / 300. The Plus (320 x 320 x 400 mm) and Max (420 x 420 x 500 mm) are bigger but drop the bed ceiling to 90 C where the three small ones reach 110 C. Anycubic's own note: Kobra 2 firmware must be at V3.0.6 or above for the quoted speed[1][3][4][5][6] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm in X x Y x Z; Anycubic quotes 12.1 L[1] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 440 x 435 mm stated as HWD, so the desk footprint is about 440 x 435 mm and the height is 486 mm[1] | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[2] |
| Net weight (kg) | 8.4 kg[1] | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame; Anycubic describes double metal spindles with SG15 bearings on the moving axes[1] | IDEX — two independently driven print heads[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double-threaded rod Z axis (dual lead screws)[1] | Z-axis lead 8 mm; X and Y leads 40 mm[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 300 mm/s maximum print speed (Anycubic Lab figure; firmware V3.0.6 or above required)[1] | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[2] |
| Recommended/typical print speed | 200 mm/s recommended print speed (manufacturer figure) - the number to plan around, not the 300 mm/s headline[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 3000 mm/s2 acceleration (manufacturer figure) - modest next to the 20000 mm/s2 of the current Kobra generation[1][7] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a dual-geared extrusion structure[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | 300 °C maximum (manufacturer claim)[2] |
| Heater cartridge power (W) | 60 W hotend heater (Anycubic states "upgraded extruder power reaches up to 60 watts")[1] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided textured PEI sheet[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset and a user-adjustable Z compensation value[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted, with power-loss recovery[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan rated to 7000 rpm (Anycubic figure)[1] | Not documented |
| Electronics & Power | ||
| Total rated power draw | Not documented | Integrated controller rated 300 W + 450 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 7-inch touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | microSD card[1] | Wi-Fi, USB cable, USB flash drive[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular assembly - Anycubic states 5 pieces in about 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU[1] | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[8] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor